window.BOLD.common.Shopify.saveProduct("copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors", 947056214060, {"id":947056214060,"title":"Single Pixel RGBW Chainable with Grove Connectors","handle":"copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors","description":"\u003ch1\u003eSIngle Pixel RGBW Chainable with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our single Pixel Programmable RGBW Strip.  This is a small chainable board with one 5050 SK6812RGBW RGBW LED. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5587_large.JPG?v=1527448533\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003eSee a 12 Pack of Single Pixels here.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003e\u003cspan\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick and Pixel is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Pixel is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach  Pixel has two Grove connectors.  One for input and then one for output.   To chain the Pixel you connect the output of one pixell or stick to the input of another stick or Pixel and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e                   \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e                        \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"Raspberry%20Pi%20Driver\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-05-06T16:47:14-07:00","created_at":"2018-05-27T12:04:44-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":160,"price_min":160,"price_max":160,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9471284674604,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0610-GRVSINPIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single Pixel RGBW Chainable with Grove Connectors","public_title":null,"options":["Default Title"],"price":160,"weight":3,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728594","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588.JPG?v=1527448533","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy.JPG?v=1527448798"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533","options":["Title"],"media":[{"alt":null,"id":1532015018028,"position":1,"preview_image":{"aspect_ratio":1.388,"height":595,"width":826,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533"},"aspect_ratio":1.388,"height":595,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533","width":826},{"alt":null,"id":1532014985260,"position":2,"preview_image":{"aspect_ratio":1.214,"height":693,"width":841,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588.JPG?v=1527448533"},"aspect_ratio":1.214,"height":693,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588.JPG?v=1527448533","width":841},{"alt":null,"id":1532034711596,"position":3,"preview_image":{"aspect_ratio":1.214,"height":693,"width":841,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy.JPG?v=1527448798"},"aspect_ratio":1.214,"height":693,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy.JPG?v=1527448798","width":841}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eSIngle Pixel RGBW Chainable with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our single Pixel Programmable RGBW Strip.  This is a small chainable board with one 5050 SK6812RGBW RGBW LED. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5587_large.JPG?v=1527448533\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003eSee a 12 Pack of Single Pixels here.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003e\u003cspan\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick and Pixel is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Pixel is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach  Pixel has two Grove connectors.  One for input and then one for output.   To chain the Pixel you connect the output of one pixell or stick to the input of another stick or Pixel and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e                   \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e                        \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"Raspberry%20Pi%20Driver\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(9471284674604, { variant: {"id":9471284674604,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0610-GRVSINPIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single Pixel RGBW Chainable with Grove Connectors","public_title":null,"options":["Default Title"],"price":160,"weight":3,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728594","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 19, product_id: 947056214060, product_handle: "copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors", price: 160, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.apps_installed = {"Product Upsell":3} || {};window.BOLD.common.Shopify.saveProduct("grove-blue-led", 229329535006, {"id":229329535006,"title":"Grove Blue LED","handle":"grove-blue-led","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Blue\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?6156758851445495420\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\n\u003cpre\u003e \n#define LED 2 \/\/connect LED to digital pin2\nvoid setup() { \n \/\/ initialize the digital pin2 as an output.\n pinMode(LED, OUTPUT); \n}\n \nvoid loop() {\n digitalWrite(LED, HIGH); \/\/ set the LED on\n delay(500); \/\/ for 500ms\n digitalWrite(LED, LOW); \/\/ set the LED off\n delay(500);\n}\u003c\/pre\u003e","published_at":"2017-10-19T21:17:33-07:00","created_at":"2017-10-19T21:17:34-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,LEDs,Raspberry Pi,Arduino,ESP8266","tags":[],"price":295,"price_min":295,"price_max":295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340495814686,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0083-GRVLEDB-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove Blue LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":56,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/f721cedf8a9f4837eaab56feb9e19c18.jpg?v=1508473054","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a5f614c8a808b253bd134195789be2d4.jpg?v=1508473054","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/953ea8c622deb9079fddd69bd498c509.jpg?v=1508473054","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a710a0e09036d8b673f07ecbb1df600.jpg?v=1508473054","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_50acd6e8-c56b-4895-8304-3e30f5e8eb61.jpg?v=1508473054"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/f721cedf8a9f4837eaab56feb9e19c18.jpg?v=1508473054","options":["Title"],"media":[{"alt":"Grove Blue LED","id":828904112172,"position":1,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/f721cedf8a9f4837eaab56feb9e19c18.jpg?v=1508473054"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/f721cedf8a9f4837eaab56feb9e19c18.jpg?v=1508473054","width":700},{"alt":"Grove Blue LED","id":828904144940,"position":2,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a5f614c8a808b253bd134195789be2d4.jpg?v=1508473054"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a5f614c8a808b253bd134195789be2d4.jpg?v=1508473054","width":700},{"alt":"Grove Blue LED","id":828904210476,"position":3,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/953ea8c622deb9079fddd69bd498c509.jpg?v=1508473054"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/953ea8c622deb9079fddd69bd498c509.jpg?v=1508473054","width":700},{"alt":"Grove Blue LED","id":828904243244,"position":4,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a710a0e09036d8b673f07ecbb1df600.jpg?v=1508473054"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a710a0e09036d8b673f07ecbb1df600.jpg?v=1508473054","width":700},{"alt":"Grove Blue LED","id":828904276012,"position":5,"preview_image":{"aspect_ratio":1.155,"height":1108,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_50acd6e8-c56b-4895-8304-3e30f5e8eb61.jpg?v=1508473054"},"aspect_ratio":1.155,"height":1108,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_50acd6e8-c56b-4895-8304-3e30f5e8eb61.jpg?v=1508473054","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Blue\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?6156758851445495420\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\n\u003cpre\u003e \n#define LED 2 \/\/connect LED to digital pin2\nvoid setup() { \n \/\/ initialize the digital pin2 as an output.\n pinMode(LED, OUTPUT); \n}\n \nvoid loop() {\n digitalWrite(LED, HIGH); \/\/ set the LED on\n delay(500); \/\/ for 500ms\n digitalWrite(LED, LOW); \/\/ set the LED off\n delay(500);\n}\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(3340495814686, { variant: {"id":3340495814686,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0083-GRVLEDB-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove Blue LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":56,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 56, product_id: 229329535006, product_handle: "grove-blue-led", price: 295, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-green-led", 229329109022, {"id":229329109022,"title":"Grove Green LED","handle":"grove-green-led","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Green\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?15934757482879410113\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e","published_at":"2017-10-19T21:17:26-07:00","created_at":"2017-10-19T21:17:26-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,LEDs,Raspberry Pi,Arduino,ESP8266","tags":[],"price":295,"price_min":295,"price_max":295,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340489719838,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0082-GRVLEDG-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Green LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6eeb6a4bb33ebaba07e993a0cf632cca.jpg?v=1508473047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c533477b7f91981bddc2420f06d4e42a.jpg?v=1508473047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b2d46e13a94ab82316f90777b78d6fe4.jpg?v=1508473047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3bcea2b4e91cd321f91a3edf97837b4a_17ac01eb-a135-467a-a189-8ab8e7e5c674.jpg?v=1508473047","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/46b4fc2fd6a52c0bebe25a6ea603d658.jpg?v=1508473047"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6eeb6a4bb33ebaba07e993a0cf632cca.jpg?v=1508473047","options":["Title"],"media":[{"alt":"Grove Green LED","id":828903292972,"position":1,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6eeb6a4bb33ebaba07e993a0cf632cca.jpg?v=1508473047"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6eeb6a4bb33ebaba07e993a0cf632cca.jpg?v=1508473047","width":700},{"alt":"Grove Green LED","id":828903358508,"position":2,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c533477b7f91981bddc2420f06d4e42a.jpg?v=1508473047"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c533477b7f91981bddc2420f06d4e42a.jpg?v=1508473047","width":700},{"alt":"Grove Green LED","id":828903456812,"position":3,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b2d46e13a94ab82316f90777b78d6fe4.jpg?v=1508473047"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b2d46e13a94ab82316f90777b78d6fe4.jpg?v=1508473047","width":700},{"alt":"Grove Green LED","id":828903522348,"position":4,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3bcea2b4e91cd321f91a3edf97837b4a_17ac01eb-a135-467a-a189-8ab8e7e5c674.jpg?v=1508473047"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3bcea2b4e91cd321f91a3edf97837b4a_17ac01eb-a135-467a-a189-8ab8e7e5c674.jpg?v=1508473047","width":700},{"alt":"Grove Green LED","id":828903587884,"position":5,"preview_image":{"aspect_ratio":1.155,"height":1108,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/46b4fc2fd6a52c0bebe25a6ea603d658.jpg?v=1508473047"},"aspect_ratio":1.155,"height":1108,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/46b4fc2fd6a52c0bebe25a6ea603d658.jpg?v=1508473047","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Green\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?15934757482879410113\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(3340489719838, { variant: {"id":3340489719838,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0082-GRVLEDG-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Green LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229329109022, product_handle: "grove-green-led", price: 295, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("the-bc24-esp32-based-24-rgbw-pixels-with-grove-connectors", 992770129964, {"id":992770129964,"title":"The BC24 - ESP32 based 24 RGBW Pixels with Grove Connectors","handle":"the-bc24-esp32-based-24-rgbw-pixels-with-grove-connectors","description":"\u003ch1\u003eThe BC24 - ESP32 based 24 RGBW Pixels with Grove Connectors\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e The BC24 is an amazing display. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eWith 24 programmable Pixel\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eRGBW LEDs and a very fast processor you can create very interesting displays. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eYou can add more Pixel strings, other displays and many sensors using the Grove connectors.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe processor on the BC24 is an ESP32 which is an awesome processor.  It has 2 cores in the CPU, lots of memory and has really interesting stuff built in like capacitive touch sensors, a Digital to Analog Converter (think Music out from your BC24!), lots of GPIO (General Purpose Input Output) for your projects and a robust I2C bus for connecting to your sensors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe RGBW (Red Green Blue White) Pixels are completely programmable (millions of colors) and includes a bright white LED to give you pure warm white.   These programmable pixels are 100% compatible with NeoPixels.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 class=\"p2\"\u003eERRATA\u003c\/h1\u003e\n\u003cp class=\"p2\"\u003e\u003cstrong\u003eVersion 0600-50418-01:\u003c\/strong\u003e Grove Connector J5 is mislabelled.   J5 should be labeled D15\/A5   (NOT D21\/D4)\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eConnect to your other DIY Projects\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eYou can easily connect to other devices with the BC24.   For example, you can connect to \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/ourweather-complete-weather-kit\"\u003e\u003cspan class=\"s2\"\u003eOurWeather\u003c\/span\u003e\u003c\/a\u003e (Complete Weather Station Kit) by using the \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/ourweather-rest-interface-interface-raspberry-pi\/\"\u003e\u003cspan class=\"s2\"\u003eREST interface included\u003c\/span\u003e\u003c\/a\u003e with the OurWeather product.   The ESP32 has a full WiFi network interface that you can use to connect to virtually anything that has an interface!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove connectors allow you to easily and safely connect hundreds of sensors (and more Pixel strips if you want!) with no soldering.   And you CAN'T plug them in backwards.   Fewer boards in the Box of Death.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_1300_2_large.JPG?v=1529020444\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/06\/esp32-bc24-demo-software-released\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 \/ Demo Software Documentation\u003c\/a\u003e (READ THIS FIRST!!!!!)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/07\/BC24_072318-V1.2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Specification\u003c\/a\u003e (New Version 7\/23\/2018)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24DEMO\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Demo Software\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_COMPASS\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Compass Software\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_GETIP\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 GetIP Wireless Provisioning\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ES32_BC24_SOLARNL\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Solar Night Light\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_AIRQUALITY\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eBC24 AIr Quality Software\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e Articles about the BC24\u003c\/h2\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/06\/tutorial-esp32-bc24-and-lsm303-compass-accelerometer\/\" title=\"Tutorial: ESP32 \/ BC24 and LSM303 Compass – Accelerometer\"\u003eTutorial: ESP32 \/ BC24 and LSM303 Compass – Accelerometer\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/05\/new-kickstarter-bc24-esp32\/\" title=\"New Kickstarter – The BC24 – ESP32 Based Big Circle 24\"\u003eNew Kickstarter – The BC24 – ESP32 Based Big Circle 24\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/06\/tutorial-esp32-bc24-provisioning-for-wifi\/\" title=\"Tutorial: Provisioning your ESP32 for WiFi. 3 Different Ways.\"\u003eTutorial: Provisioning your ESP32 for WiFi. 3 Different Ways.\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/05\/grove-pixel-rgbw-stick-drivers-released\/\" title=\"Grove Pixel RGBW Stick Drivers Released\"\u003eGrove Pixel RGBW Stick Drivers Released\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/04\/esp32-tutorial-debouncing-a-button-press-using-interrupts\/\" title=\"ESP32 Tutorial: Debouncing a Button Press using Interrupts\"\u003eESP32 Tutorial: Debouncing a Button Press using Interrupts\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/05\/new-product-grove-8-pixel-rgbw-stick\/\" title=\"New Product – Grove 8 Pixel RGBW Stick\"\u003eNew Product – Grove 8 Pixel RGBW Stick\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch2\u003eInstalling ESP32 \/ BC24 Support on the Arduino IDE\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e(Note: If you have installed the SDK before, go into your Arduino Directory -\u0026gt; hardware\/ and delete espressif )\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1) Open up the Arduino IDE\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2) Open Up Preferences, hit the box to the right of \"Additional Board Manager URLs\"\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3) Cut and paste the following into the box\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ccode data-root-container=\"true\" data-content-container=\"true\"\u003ehttps:\/\/dl.espressif.com\/dl\/package_esp32_dev_index.json\u003c\/code\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e4) Hit OK on the box and OK on the preferences box.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e5) Close Arduino and Restart the Arduino IDE\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e6) Go to: Tools-\u0026gt;Boards-\u0026gt;Board Manager\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e7) search on ESP32\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e8) Click on Install\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e9) Close and Restart the Arduino IDE again\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e10) Go to tools-\u0026gt;Boards and select \"ESP32 Adafruit Feather\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat is on the BC24?\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe BC24 is a novel use of programmable Pixel LEDs (RGBW programmable) in a perfect 24 segment circle combined with an powerful, highly connected on board computer (WiFi, Bluetooth, Bluetooth Low Power) called the ESP32.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures of the ESP32 include the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eProcessors:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eCPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eUltra low power (ULP) co-processor\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eMemory: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e520 KiB SRAM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eWireless connectivity:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eWi-Fi: 802.11 b\/g\/n\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eBluetooth: v4.2 BR\/EDR and BLE\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003ePeripheral interfaces:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e12-bit SAR ADC up to 18 channels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e2 × 8-bit DACs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e10 × touch sensors (capacitive sensing GPIOs)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eTemperature sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e4 × SPI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e2 × I²S interfaces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e2 × I²C interfaces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e3 × UART\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eSD\/SDIO\/CE-ATA\/MMC\/eMMC host controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eSDIO\/SPI slave controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eEthernet MAC interface with dedicated DMA and IEEE 1588 Precision Time Protocol support\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eCAN bus 2.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eInfrared remote controller (TX\/RX, up to 8 channels)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eMotor PWM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eLED PWM (up to 16 channels)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eHall effect sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eUltra low power analog pre-amplifier\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSecurity:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eIEEE 802.11 standard security features all supported, including WFA, WPA\/WPA2 and WAPI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eSecure boot\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eFlash encryption\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e1024-bit OTP, up to 768-bit for customers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eCryptographic hardware acceleration: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eAES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p4\"\u003e \u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003eEspecially Interesting features of the ESP32 (look at Power Down Mode)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eTwo Independent Core Processors\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSupports Promiscuous mode, Station, SoftAP and Wi-Fi direct mode\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eMax data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eMaximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eMinimum receiver sensitivity of -97 dBm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e135 Mbps UDP sustained throughput\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e5 μA power consumption in Deep-sleep\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p6\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"p7\"\u003e\u003cspan class=\"s4\"\u003eI2C Interface\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e There are three Grove I2C connectors on the BC24. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThese are 3.3V I2C Grove connectors. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eMore about Grove Connectors on \u003ca href=\"http:\/\/www.switchdoc.com\"\u003e\u003cspan class=\"s5\"\u003ewww.switchdoc.com\u003c\/span\u003e\u003c\/a\u003e.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eNote that you can plug these into a Raspberry Pi. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eIf you do, make sure that the on board ESP32 is not also accessing the I2C Bus. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe BC24 or the Raspberry Pi will need to be the slave. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThere are numerous programs available on the net for both of these devices. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eSCL and SDA both have 10KOhm Pullups to 3.3V.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p6\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSample Projects\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBuild a Air Quality Detector\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eTurning the BC24 into a Indoor Air Quality Sensor is simple.   We use an \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/grove-air-quality-sensor-1\"\u003e\u003cspan class=\"s2\"\u003eAnalog Grove Air Quality Sensor \u003c\/span\u003e\u003c\/a\u003eand plug it in. Then a bit of software magic and you have a new device!  This is an amazingly sensitive sensor.  \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/air-quality-sensor-tested-raspberry-pi\/\"\u003e\u003cspan class=\"s2\"\u003eSee our article here on this sensor.\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5844_copy_large.JPG?v=1529352080\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/51Lm2u7xa-L_large.jpg?v=1529351860\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p6\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBuild a Solar Powered Display\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eYou can easily convert the BC24 into a solar powered system by using the SwitchDoc Labs \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/suncontrol-advanced-solar-controller-charger-sun-tracker-data-gathering-grove-header\"\u003e\u003cspan class=\"s2\"\u003eSunControl Solar Power Controller and Data Gathering  board\u003c\/span\u003e\u003c\/a\u003e along with a LiPo battery and solar panels.   Just plug them together using Grove cables.   How is that for a fancy night light in your yard!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5852_copy_large.JPG?v=1529352203\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p7\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBuild a Weather Station\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eWith the powerful ESP32 processor on the BC24, you can easily build a full weather station using the BC24.   See our Reward for just that.  Includes Anemometer, Wind Vane, Rain Bucket, Indoor temperature and humidity, outdoor temperature and humidity and a sunlight and UV sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5873_large.JPG?v=1529352110\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eConnect The BC24 to Amazon Alexa\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eSwitchDoc Labs has connected a variety of their products to the Amazon Alexa system.  You can learn how to\u003ca href=\"https:\/\/amzn.to\/2s6HvxX\"\u003e\u003cspan class=\"s2\"\u003e connect the Raspberry Pi to Alexa here\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/Amazon_Alexa_App_Logo_large.png?v=1529352249\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eSwitchDoc is building the software for the BC24 to connect it up to Alexa.  For what?  We don't know yet.  But we will have fun figuring it out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2018-06-14T16:42:16-07:00","created_at":"2018-06-14T16:53:51-07:00","vendor":"SwitchDoc Labs","type":"full kits, BC24","tags":[],"price":1595,"price_min":1595,"price_max":1595,"available":false,"price_varies":false,"compare_at_price":3995,"compare_at_price_min":3995,"compare_at_price_max":3995,"compare_at_price_varies":false,"variants":[{"id":9738136977452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0600-BIGCIRCLE32-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"The BC24 - ESP32 based 24 RGBW Pixels with Grove Connectors","public_title":null,"options":["Default Title"],"price":1595,"weight":2,"compare_at_price":3995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728587","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6125.JPG?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5594.JPG?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5583_2.jpg?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5832_2.PNG?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1300_2.JPG?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6092_2.JPG?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_c61f56d2-d98f-49e4-a14d-1765c46e0e70.JPG?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/rjVOiTe3_400x400_b86d9cab-76a0-43ab-ad76-f1d3af98899d.jpg?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/FFX77AEJ7AQPNO1.LARGE.jpg?v=1529451438","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c8e9000afebc96a6dd5b9c69e6aca0d5_original.JPG?v=1529451438","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Amazon_Alexa_App_Logo.png?v=1529451438"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6125.JPG?v=1529451438","options":["Title"],"media":[{"alt":null,"id":1569861664812,"position":1,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6125.JPG?v=1529451438"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6125.JPG?v=1529451438","width":3024},{"alt":null,"id":1569862221868,"position":2,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5594.JPG?v=1529451438"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5594.JPG?v=1529451438","width":3024},{"alt":null,"id":1569862385708,"position":3,"preview_image":{"aspect_ratio":0.982,"height":2514,"width":2469,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5583_2.jpg?v=1529451438"},"aspect_ratio":0.982,"height":2514,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5583_2.jpg?v=1529451438","width":2469},{"alt":null,"id":1569861795884,"position":4,"preview_image":{"aspect_ratio":0.562,"height":1334,"width":750,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5832_2.PNG?v=1529451438"},"aspect_ratio":0.562,"height":1334,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5832_2.PNG?v=1529451438","width":750},{"alt":null,"id":1569861697580,"position":5,"preview_image":{"aspect_ratio":1.3,"height":1024,"width":1331,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1300_2.JPG?v=1529451438"},"aspect_ratio":1.3,"height":1024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1300_2.JPG?v=1529451438","width":1331},{"alt":null,"id":1569861730348,"position":6,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6092_2.JPG?v=1529451438"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6092_2.JPG?v=1529451438","width":3024},{"alt":null,"id":1569861828652,"position":7,"preview_image":{"aspect_ratio":1.778,"height":1080,"width":1920,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_c61f56d2-d98f-49e4-a14d-1765c46e0e70.JPG?v=1529451438"},"aspect_ratio":1.778,"height":1080,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_c61f56d2-d98f-49e4-a14d-1765c46e0e70.JPG?v=1529451438","width":1920},{"alt":null,"id":1569862287404,"position":8,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/rjVOiTe3_400x400_b86d9cab-76a0-43ab-ad76-f1d3af98899d.jpg?v=1529451438"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/rjVOiTe3_400x400_b86d9cab-76a0-43ab-ad76-f1d3af98899d.jpg?v=1529451438","width":400},{"alt":null,"id":1569862320172,"position":9,"preview_image":{"aspect_ratio":1.061,"height":700,"width":743,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/FFX77AEJ7AQPNO1.LARGE.jpg?v=1529451438"},"aspect_ratio":1.061,"height":700,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/FFX77AEJ7AQPNO1.LARGE.jpg?v=1529451438","width":743},{"alt":null,"id":1569863467052,"position":10,"preview_image":{"aspect_ratio":1.778,"height":576,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c8e9000afebc96a6dd5b9c69e6aca0d5_original.JPG?v=1529451438"},"aspect_ratio":1.778,"height":576,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c8e9000afebc96a6dd5b9c69e6aca0d5_original.JPG?v=1529451438","width":1024},{"alt":null,"id":1576054816812,"position":11,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Amazon_Alexa_App_Logo.png?v=1529451438"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Amazon_Alexa_App_Logo.png?v=1529451438","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eThe BC24 - ESP32 based 24 RGBW Pixels with Grove Connectors\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e The BC24 is an amazing display. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eWith 24 programmable Pixel\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eRGBW LEDs and a very fast processor you can create very interesting displays. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eYou can add more Pixel strings, other displays and many sensors using the Grove connectors.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe processor on the BC24 is an ESP32 which is an awesome processor.  It has 2 cores in the CPU, lots of memory and has really interesting stuff built in like capacitive touch sensors, a Digital to Analog Converter (think Music out from your BC24!), lots of GPIO (General Purpose Input Output) for your projects and a robust I2C bus for connecting to your sensors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe RGBW (Red Green Blue White) Pixels are completely programmable (millions of colors) and includes a bright white LED to give you pure warm white.   These programmable pixels are 100% compatible with NeoPixels.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 class=\"p2\"\u003eERRATA\u003c\/h1\u003e\n\u003cp class=\"p2\"\u003e\u003cstrong\u003eVersion 0600-50418-01:\u003c\/strong\u003e Grove Connector J5 is mislabelled.   J5 should be labeled D15\/A5   (NOT D21\/D4)\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eConnect to your other DIY Projects\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eYou can easily connect to other devices with the BC24.   For example, you can connect to \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/ourweather-complete-weather-kit\"\u003e\u003cspan class=\"s2\"\u003eOurWeather\u003c\/span\u003e\u003c\/a\u003e (Complete Weather Station Kit) by using the \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/ourweather-rest-interface-interface-raspberry-pi\/\"\u003e\u003cspan class=\"s2\"\u003eREST interface included\u003c\/span\u003e\u003c\/a\u003e with the OurWeather product.   The ESP32 has a full WiFi network interface that you can use to connect to virtually anything that has an interface!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove connectors allow you to easily and safely connect hundreds of sensors (and more Pixel strips if you want!) with no soldering.   And you CAN'T plug them in backwards.   Fewer boards in the Box of Death.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_1300_2_large.JPG?v=1529020444\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/06\/esp32-bc24-demo-software-released\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 \/ Demo Software Documentation\u003c\/a\u003e (READ THIS FIRST!!!!!)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/07\/BC24_072318-V1.2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Specification\u003c\/a\u003e (New Version 7\/23\/2018)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24DEMO\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Demo Software\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_COMPASS\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Compass Software\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_GETIP\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 GetIP Wireless Provisioning\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ES32_BC24_SOLARNL\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBC24 Solar Night Light\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_AIRQUALITY\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eBC24 AIr Quality Software\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e Articles about the BC24\u003c\/h2\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/06\/tutorial-esp32-bc24-and-lsm303-compass-accelerometer\/\" title=\"Tutorial: ESP32 \/ BC24 and LSM303 Compass – Accelerometer\"\u003eTutorial: ESP32 \/ BC24 and LSM303 Compass – Accelerometer\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/05\/new-kickstarter-bc24-esp32\/\" title=\"New Kickstarter – The BC24 – ESP32 Based Big Circle 24\"\u003eNew Kickstarter – The BC24 – ESP32 Based Big Circle 24\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/06\/tutorial-esp32-bc24-provisioning-for-wifi\/\" title=\"Tutorial: Provisioning your ESP32 for WiFi. 3 Different Ways.\"\u003eTutorial: Provisioning your ESP32 for WiFi. 3 Different Ways.\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/05\/grove-pixel-rgbw-stick-drivers-released\/\" title=\"Grove Pixel RGBW Stick Drivers Released\"\u003eGrove Pixel RGBW Stick Drivers Released\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/04\/esp32-tutorial-debouncing-a-button-press-using-interrupts\/\" title=\"ESP32 Tutorial: Debouncing a Button Press using Interrupts\"\u003eESP32 Tutorial: Debouncing a Button Press using Interrupts\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/05\/new-product-grove-8-pixel-rgbw-stick\/\" title=\"New Product – Grove 8 Pixel RGBW Stick\"\u003eNew Product – Grove 8 Pixel RGBW Stick\u003c\/a\u003e\u003c\/h4\u003e\n\u003ch2\u003eInstalling ESP32 \/ BC24 Support on the Arduino IDE\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e(Note: If you have installed the SDK before, go into your Arduino Directory -\u0026gt; hardware\/ and delete espressif )\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInstructions:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1) Open up the Arduino IDE\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2) Open Up Preferences, hit the box to the right of \"Additional Board Manager URLs\"\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3) Cut and paste the following into the box\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ccode data-root-container=\"true\" data-content-container=\"true\"\u003ehttps:\/\/dl.espressif.com\/dl\/package_esp32_dev_index.json\u003c\/code\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e4) Hit OK on the box and OK on the preferences box.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e5) Close Arduino and Restart the Arduino IDE\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e6) Go to: Tools-\u0026gt;Boards-\u0026gt;Board Manager\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e7) search on ESP32\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e8) Click on Install\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e9) Close and Restart the Arduino IDE again\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e10) Go to tools-\u0026gt;Boards and select \"ESP32 Adafruit Feather\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat is on the BC24?\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe BC24 is a novel use of programmable Pixel LEDs (RGBW programmable) in a perfect 24 segment circle combined with an powerful, highly connected on board computer (WiFi, Bluetooth, Bluetooth Low Power) called the ESP32.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures of the ESP32 include the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eProcessors:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eCPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eUltra low power (ULP) co-processor\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eMemory: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e520 KiB SRAM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eWireless connectivity:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eWi-Fi: 802.11 b\/g\/n\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eBluetooth: v4.2 BR\/EDR and BLE\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003ePeripheral interfaces:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e12-bit SAR ADC up to 18 channels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e2 × 8-bit DACs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e10 × touch sensors (capacitive sensing GPIOs)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eTemperature sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e4 × SPI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e2 × I²S interfaces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e2 × I²C interfaces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e3 × UART\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eSD\/SDIO\/CE-ATA\/MMC\/eMMC host controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eSDIO\/SPI slave controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eEthernet MAC interface with dedicated DMA and IEEE 1588 Precision Time Protocol support\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eCAN bus 2.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eInfrared remote controller (TX\/RX, up to 8 channels)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eMotor PWM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eLED PWM (up to 16 channels)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eHall effect sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eUltra low power analog pre-amplifier\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSecurity:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eIEEE 802.11 standard security features all supported, including WFA, WPA\/WPA2 and WAPI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eSecure boot\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eFlash encryption\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e1024-bit OTP, up to 768-bit for customers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eCryptographic hardware acceleration: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003eAES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p4\"\u003e \u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003eEspecially Interesting features of the ESP32 (look at Power Down Mode)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eTwo Independent Core Processors\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSupports Promiscuous mode, Station, SoftAP and Wi-Fi direct mode\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eMax data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eMaximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eMinimum receiver sensitivity of -97 dBm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e135 Mbps UDP sustained throughput\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s3\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e5 μA power consumption in Deep-sleep\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p6\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"p7\"\u003e\u003cspan class=\"s4\"\u003eI2C Interface\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e There are three Grove I2C connectors on the BC24. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThese are 3.3V I2C Grove connectors. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eMore about Grove Connectors on \u003ca href=\"http:\/\/www.switchdoc.com\"\u003e\u003cspan class=\"s5\"\u003ewww.switchdoc.com\u003c\/span\u003e\u003c\/a\u003e.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eNote that you can plug these into a Raspberry Pi. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eIf you do, make sure that the on board ESP32 is not also accessing the I2C Bus. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe BC24 or the Raspberry Pi will need to be the slave. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThere are numerous programs available on the net for both of these devices. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eSCL and SDA both have 10KOhm Pullups to 3.3V.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p6\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSample Projects\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBuild a Air Quality Detector\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eTurning the BC24 into a Indoor Air Quality Sensor is simple.   We use an \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/grove-air-quality-sensor-1\"\u003e\u003cspan class=\"s2\"\u003eAnalog Grove Air Quality Sensor \u003c\/span\u003e\u003c\/a\u003eand plug it in. Then a bit of software magic and you have a new device!  This is an amazingly sensitive sensor.  \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/air-quality-sensor-tested-raspberry-pi\/\"\u003e\u003cspan class=\"s2\"\u003eSee our article here on this sensor.\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5844_copy_large.JPG?v=1529352080\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/51Lm2u7xa-L_large.jpg?v=1529351860\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p6\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBuild a Solar Powered Display\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eYou can easily convert the BC24 into a solar powered system by using the SwitchDoc Labs \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/suncontrol-advanced-solar-controller-charger-sun-tracker-data-gathering-grove-header\"\u003e\u003cspan class=\"s2\"\u003eSunControl Solar Power Controller and Data Gathering  board\u003c\/span\u003e\u003c\/a\u003e along with a LiPo battery and solar panels.   Just plug them together using Grove cables.   How is that for a fancy night light in your yard!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5852_copy_large.JPG?v=1529352203\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p7\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBuild a Weather Station\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eWith the powerful ESP32 processor on the BC24, you can easily build a full weather station using the BC24.   See our Reward for just that.  Includes Anemometer, Wind Vane, Rain Bucket, Indoor temperature and humidity, outdoor temperature and humidity and a sunlight and UV sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5873_large.JPG?v=1529352110\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eConnect The BC24 to Amazon Alexa\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eSwitchDoc Labs has connected a variety of their products to the Amazon Alexa system.  You can learn how to\u003ca href=\"https:\/\/amzn.to\/2s6HvxX\"\u003e\u003cspan class=\"s2\"\u003e connect the Raspberry Pi to Alexa here\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/Amazon_Alexa_App_Logo_large.png?v=1529352249\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eSwitchDoc is building the software for the BC24 to connect it up to Alexa.  For what?  We don't know yet.  But we will have fun figuring it out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(9738136977452, { variant: {"id":9738136977452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0600-BIGCIRCLE32-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"The BC24 - ESP32 based 24 RGBW Pixels with Grove Connectors","public_title":null,"options":["Default Title"],"price":1595,"weight":2,"compare_at_price":3995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728587","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 992770129964, product_handle: "the-bc24-esp32-based-24-rgbw-pixels-with-grove-connectors", price: 1595, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-red-led", 229328551966, {"id":229328551966,"title":"Grove Red LED","handle":"grove-red-led","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Red\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?17315073022137112792\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e","published_at":"2017-10-19T21:17:19-07:00","created_at":"2017-10-19T21:17:20-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,LEDs,Raspberry Pi,Arduino,ESP8266","tags":[],"price":295,"price_min":295,"price_max":295,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340485722142,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0081-GRVLEDR-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Red LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b4926440e243e10220e982483dc43c3d.jpg?v=1508473040","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3bcea2b4e91cd321f91a3edf97837b4a.jpg?v=1508473040","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/16240cfaf20c4917f43e5006d885fbf3.jpg?v=1508473040","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/036924db529f19c866b0060c43f54ec2.jpg?v=1508473040","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_2e08dbf8-fc79-4a12-bd69-a3b5aa696d54.jpg?v=1508473040"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b4926440e243e10220e982483dc43c3d.jpg?v=1508473040","options":["Title"],"media":[{"alt":"Grove Red LED","id":828902735916,"position":1,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b4926440e243e10220e982483dc43c3d.jpg?v=1508473040"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b4926440e243e10220e982483dc43c3d.jpg?v=1508473040","width":700},{"alt":"Grove Red LED","id":828902768684,"position":2,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3bcea2b4e91cd321f91a3edf97837b4a.jpg?v=1508473040"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3bcea2b4e91cd321f91a3edf97837b4a.jpg?v=1508473040","width":700},{"alt":"Grove Red LED","id":828902801452,"position":3,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/16240cfaf20c4917f43e5006d885fbf3.jpg?v=1508473040"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/16240cfaf20c4917f43e5006d885fbf3.jpg?v=1508473040","width":700},{"alt":"Grove Red LED","id":828902834220,"position":4,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/036924db529f19c866b0060c43f54ec2.jpg?v=1508473040"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/036924db529f19c866b0060c43f54ec2.jpg?v=1508473040","width":700},{"alt":"Grove Red LED","id":828902866988,"position":5,"preview_image":{"aspect_ratio":1.155,"height":1108,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_2e08dbf8-fc79-4a12-bd69-a3b5aa696d54.jpg?v=1508473040"},"aspect_ratio":1.155,"height":1108,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_2e08dbf8-fc79-4a12-bd69-a3b5aa696d54.jpg?v=1508473040","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Red\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?17315073022137112792\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(3340485722142, { variant: {"id":3340485722142,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0081-GRVLEDR-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Red LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229328551966, product_handle: "grove-red-led", price: 295, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors", 947056214060, {"id":947056214060,"title":"Single Pixel RGBW Chainable with Grove Connectors","handle":"copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors","description":"\u003ch1\u003eSIngle Pixel RGBW Chainable with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our single Pixel Programmable RGBW Strip.  This is a small chainable board with one 5050 SK6812RGBW RGBW LED. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5587_large.JPG?v=1527448533\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003eSee a 12 Pack of Single Pixels here.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003e\u003cspan\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick and Pixel is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Pixel is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach  Pixel has two Grove connectors.  One for input and then one for output.   To chain the Pixel you connect the output of one pixell or stick to the input of another stick or Pixel and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e                   \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e                        \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"Raspberry%20Pi%20Driver\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-05-06T16:47:14-07:00","created_at":"2018-05-27T12:04:44-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":160,"price_min":160,"price_max":160,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9471284674604,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0610-GRVSINPIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single Pixel RGBW Chainable with Grove Connectors","public_title":null,"options":["Default Title"],"price":160,"weight":3,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728594","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588.JPG?v=1527448533","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy.JPG?v=1527448798"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533","options":["Title"],"media":[{"alt":null,"id":1532015018028,"position":1,"preview_image":{"aspect_ratio":1.388,"height":595,"width":826,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533"},"aspect_ratio":1.388,"height":595,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587.JPG?v=1527448533","width":826},{"alt":null,"id":1532014985260,"position":2,"preview_image":{"aspect_ratio":1.214,"height":693,"width":841,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588.JPG?v=1527448533"},"aspect_ratio":1.214,"height":693,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588.JPG?v=1527448533","width":841},{"alt":null,"id":1532034711596,"position":3,"preview_image":{"aspect_ratio":1.214,"height":693,"width":841,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy.JPG?v=1527448798"},"aspect_ratio":1.214,"height":693,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy.JPG?v=1527448798","width":841}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eSIngle Pixel RGBW Chainable with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our single Pixel Programmable RGBW Strip.  This is a small chainable board with one 5050 SK6812RGBW RGBW LED. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5587_large.JPG?v=1527448533\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003eSee a 12 Pack of Single Pixels here.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003e\u003cspan\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick and Pixel is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Pixel is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach  Pixel has two Grove connectors.  One for input and then one for output.   To chain the Pixel you connect the output of one pixell or stick to the input of another stick or Pixel and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e                   \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e                        \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"Raspberry%20Pi%20Driver\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(9471284674604, { variant: {"id":9471284674604,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0610-GRVSINPIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Single Pixel RGBW Chainable with Grove Connectors","public_title":null,"options":["Default Title"],"price":160,"weight":3,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728594","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 19, product_id: 947056214060, product_handle: "copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors", price: 160, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors", 946926780460, {"id":946926780460,"title":"10 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors","handle":"10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors","description":"\u003ch1\u003e10 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our 10 pack of 8 Pixel Programmable RGBW Strips.  This is a small chainable board with eight 5050 SK6812RGBW RGBW LEDs. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/8StickFrontAnno_large.jpg?v=1525631072\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a single Pixel board here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis stick is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach 8 Pixel stick has two Grove connectors.  One for input and then one for output.   To chain the stick you connect the output of one stick to the input of another stick and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan\u003e\u003c\/span\u003eWhy a strip of 8?\u003c\/h2\u003e\n\u003cp\u003eAfter talking with customers, it was decided that the stick should have a power of 2 number of pixels and 8 was a good compromise.   The more important feature of this choice is that the board is symmetrical in every direction so they can be evenly stacked to create larger displays.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5584_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eBuilding Larger Displays from the 8 Pixel Stick\u003c\/h2\u003e\n\u003cp\u003eSince the stick is symmetrical, building larger displays with the 8 Pixel Stick is simple.   You mount the sticks next to each other and then daisy chain them together using Grove connectors.   Large displays will take more power than can be supplied by a computer, so you may have to feed 5V into the provided pins.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_0058_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_8PixelStrip\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-05-06T16:47:14-07:00","created_at":"2018-05-27T10:38:03-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":4495,"price_min":4495,"price_max":4495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9470893752364,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0614-10PACK8PIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"10 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors","public_title":null,"options":["Default Title"],"price":4495,"weight":57,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728648","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/53862AE1-1127-4DA2-A6C2-00123D40BB70.JPG?v=1527445287","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5584_2_351d0001-95b7-4643-9937-e105ed175f80.JPG?v=1527445287","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5585_2_2ffefc1c-6178-4dee-b512-586aa45f1ab0.JPG?v=1527445287","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_be6c1691-620d-4632-bd71-34eedbd92b8a.JPG?v=1527445287","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickBackAnno_4a283f5a-cc99-4ca6-b84e-b6748062d88c.jpg?v=1527445287","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickFrontAnno_0712acae-bbe5-44ef-958f-39b576694f4d.jpg?v=1527445287"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/53862AE1-1127-4DA2-A6C2-00123D40BB70.JPG?v=1527445287","options":["Title"],"media":[{"alt":null,"id":1531901280300,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/53862AE1-1127-4DA2-A6C2-00123D40BB70.JPG?v=1527445287"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/53862AE1-1127-4DA2-A6C2-00123D40BB70.JPG?v=1527445287","width":2048},{"alt":null,"id":1531794915372,"position":2,"preview_image":{"aspect_ratio":3.006,"height":697,"width":2095,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5584_2_351d0001-95b7-4643-9937-e105ed175f80.JPG?v=1527445287"},"aspect_ratio":3.006,"height":697,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5584_2_351d0001-95b7-4643-9937-e105ed175f80.JPG?v=1527445287","width":2095},{"alt":null,"id":1531794948140,"position":3,"preview_image":{"aspect_ratio":3.565,"height":628,"width":2239,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5585_2_2ffefc1c-6178-4dee-b512-586aa45f1ab0.JPG?v=1527445287"},"aspect_ratio":3.565,"height":628,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5585_2_2ffefc1c-6178-4dee-b512-586aa45f1ab0.JPG?v=1527445287","width":2239},{"alt":null,"id":1531794980908,"position":4,"preview_image":{"aspect_ratio":1.778,"height":1080,"width":1920,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_be6c1691-620d-4632-bd71-34eedbd92b8a.JPG?v=1527445287"},"aspect_ratio":1.778,"height":1080,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_be6c1691-620d-4632-bd71-34eedbd92b8a.JPG?v=1527445287","width":1920},{"alt":null,"id":1531795013676,"position":5,"preview_image":{"aspect_ratio":3.565,"height":628,"width":2239,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickBackAnno_4a283f5a-cc99-4ca6-b84e-b6748062d88c.jpg?v=1527445287"},"aspect_ratio":3.565,"height":628,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickBackAnno_4a283f5a-cc99-4ca6-b84e-b6748062d88c.jpg?v=1527445287","width":2239},{"alt":null,"id":1531795046444,"position":6,"preview_image":{"aspect_ratio":3.006,"height":697,"width":2095,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickFrontAnno_0712acae-bbe5-44ef-958f-39b576694f4d.jpg?v=1527445287"},"aspect_ratio":3.006,"height":697,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickFrontAnno_0712acae-bbe5-44ef-958f-39b576694f4d.jpg?v=1527445287","width":2095}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e10 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our 10 pack of 8 Pixel Programmable RGBW Strips.  This is a small chainable board with eight 5050 SK6812RGBW RGBW LEDs. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/8StickFrontAnno_large.jpg?v=1525631072\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a single Pixel board here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis stick is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach 8 Pixel stick has two Grove connectors.  One for input and then one for output.   To chain the stick you connect the output of one stick to the input of another stick and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan\u003e\u003c\/span\u003eWhy a strip of 8?\u003c\/h2\u003e\n\u003cp\u003eAfter talking with customers, it was decided that the stick should have a power of 2 number of pixels and 8 was a good compromise.   The more important feature of this choice is that the board is symmetrical in every direction so they can be evenly stacked to create larger displays.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5584_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eBuilding Larger Displays from the 8 Pixel Stick\u003c\/h2\u003e\n\u003cp\u003eSince the stick is symmetrical, building larger displays with the 8 Pixel Stick is simple.   You mount the sticks next to each other and then daisy chain them together using Grove connectors.   Large displays will take more power than can be supplied by a computer, so you may have to feed 5V into the provided pins.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_0058_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_8PixelStrip\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(9470893752364, { variant: {"id":9470893752364,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0614-10PACK8PIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"10 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors","public_title":null,"options":["Default Title"],"price":4495,"weight":57,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728648","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 2, product_id: 946926780460, product_handle: "10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors", price: 4495, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-white-led", 229330059294, {"id":229330059294,"title":"Grove White LED","handle":"grove-white-led","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: White\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?11830792138838487109\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e","published_at":"2017-10-19T21:17:40-07:00","created_at":"2017-10-19T21:17:41-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,LEDs,Raspberry Pi,Arduino,ESP8266","tags":[],"price":295,"price_min":295,"price_max":295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340504662046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0084-GRVLEDW-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove White LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0efec1c1019c17c50695bbd95ef4cd8f.jpg?v=1508473061","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/315432c103a070868ae50e3d619d6cb9.jpg?v=1508473061","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/91a3b2e8281b4d4d1f4ee80ebed3d5a0.jpg?v=1508473061","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1fbea3d2c6cc0150bb6705d60425020f.jpg?v=1508473061","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_8d46c836-1bca-40c3-9677-897dfb57d863.jpg?v=1508473061"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0efec1c1019c17c50695bbd95ef4cd8f.jpg?v=1508473061","options":["Title"],"media":[{"alt":"Grove White LED","id":828905357356,"position":1,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0efec1c1019c17c50695bbd95ef4cd8f.jpg?v=1508473061"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0efec1c1019c17c50695bbd95ef4cd8f.jpg?v=1508473061","width":700},{"alt":"Grove White LED","id":828905390124,"position":2,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/315432c103a070868ae50e3d619d6cb9.jpg?v=1508473061"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/315432c103a070868ae50e3d619d6cb9.jpg?v=1508473061","width":700},{"alt":"Grove White LED","id":828905455660,"position":3,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/91a3b2e8281b4d4d1f4ee80ebed3d5a0.jpg?v=1508473061"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/91a3b2e8281b4d4d1f4ee80ebed3d5a0.jpg?v=1508473061","width":700},{"alt":"Grove White LED","id":828905488428,"position":4,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1fbea3d2c6cc0150bb6705d60425020f.jpg?v=1508473061"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1fbea3d2c6cc0150bb6705d60425020f.jpg?v=1508473061","width":700},{"alt":"Grove White LED","id":828905521196,"position":5,"preview_image":{"aspect_ratio":1.155,"height":1108,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_8d46c836-1bca-40c3-9677-897dfb57d863.jpg?v=1508473061"},"aspect_ratio":1.155,"height":1108,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b_8d46c836-1bca-40c3-9677-897dfb57d863.jpg?v=1508473061","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: White\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?11830792138838487109\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(3340504662046, { variant: {"id":3340504662046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0084-GRVLEDW-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove White LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 2, product_id: 229330059294, product_handle: "grove-white-led", price: 295, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-purple-led", 229327994910, {"id":229327994910,"title":"Grove Purple LED","handle":"grove-purple-led","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Purple\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?11171178361849504129\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e","published_at":"2017-10-19T21:17:12-07:00","created_at":"2017-10-19T21:17:13-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,LEDs,Raspberry Pi,Arduino,ESP8266","tags":[],"price":295,"price_min":295,"price_max":295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340477038622,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0080-GRVLEDP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove Purple LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/191ffcb8012656c0940089fb3528070d.jpg?v=1508473033","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9225ccb17f77a745bcd46f7351f9b6cf.jpg?v=1508473033","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/85024d74e82d4803b93a23efd92bd705.jpg?v=1508473033","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b.jpg?v=1508473033"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/191ffcb8012656c0940089fb3528070d.jpg?v=1508473033","options":["Title"],"media":[{"alt":"Grove Purple LED","id":828902178860,"position":1,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/191ffcb8012656c0940089fb3528070d.jpg?v=1508473033"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/191ffcb8012656c0940089fb3528070d.jpg?v=1508473033","width":700},{"alt":"Grove Purple LED","id":828902211628,"position":2,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9225ccb17f77a745bcd46f7351f9b6cf.jpg?v=1508473033"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9225ccb17f77a745bcd46f7351f9b6cf.jpg?v=1508473033","width":700},{"alt":"Grove Purple LED","id":828902277164,"position":3,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/85024d74e82d4803b93a23efd92bd705.jpg?v=1508473033"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/85024d74e82d4803b93a23efd92bd705.jpg?v=1508473033","width":700},{"alt":"Grove Purple LED","id":828902309932,"position":4,"preview_image":{"aspect_ratio":1.155,"height":1108,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b.jpg?v=1508473033"},"aspect_ratio":1.155,"height":1108,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/a25ab70db90c7da3b5a572337059d26b.jpg?v=1508473033","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA general purpose LED module using a Grove Digital Port, available in different colors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove - LED producut is designed for monitoring controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. the brightness of the LED can be adjusted by the included potentiometer.\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s2\"\u003eIncludes a Grove Cable\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eStandard Grove Digital connector\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eOperate voltage: 3.3v\/5v\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eEmitting Color: Purple\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch2\u003eArduino Software Example\u003c\/h2\u003e\r\n\u003ch2\u003e\u003cimg class=\"__mce_add_custom__\" title=\"800px-grove-led.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_800px-grove-led.jpg?11171178361849504129\" alt=\"800px-grove-led.jpg\" width=\"464\" height=\"345\"\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cbr\u003e1. Connect the LED to Base Shield's digital port 2 with 4pin Grove Cable. You can use other valid Gorve Digital ports, Change port number in the code (#define LED 2).\u003cbr\u003e2. Plug it onto the Arduino. Connect the board to PC using USB cable.\u003c\/p\u003e\r\n\u003cp\u003e3. Copy the demo code to your sketch, then upload to Arduino board. Please click here if you do not know how to upload.\u003cbr\u003eYou will see the LED blink every second.\u003c\/p\u003e\r\n\u003cpre\u003e \r\n#define LED 2 \/\/connect LED to digital pin2\r\nvoid setup() { \r\n \/\/ initialize the digital pin2 as an output.\r\n pinMode(LED, OUTPUT); \r\n}\r\n \r\nvoid loop() {\r\n digitalWrite(LED, HIGH); \/\/ set the LED on\r\n delay(500); \/\/ for 500ms\r\n digitalWrite(LED, LOW); \/\/ set the LED off\r\n delay(500);\r\n}\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(3340477038622, { variant: {"id":3340477038622,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0080-GRVLEDP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove Purple LED","public_title":null,"options":["Default Title"],"price":295,"weight":6,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 7, product_id: 229327994910, product_handle: "grove-purple-led", price: 295, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors", 880308650028, {"id":880308650028,"title":"5 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors","handle":"5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors","description":"\u003ch1\u003e5 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our 5 pack of 8 Pixel Programmable RGBW Strips.  This is a small chainable board with eight 5050 SK6812RGBW RGBW LEDs. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/8StickFrontAnno_large.jpg?v=1525631072\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a single Pixel board here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis stick is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach 8 Pixel stick has two Grove connectors.  One for input and then one for output.   To chain the stick you connect the output of one stick to the input of another stick and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan\u003e\u003c\/span\u003eWhy a strip of 8?\u003c\/h2\u003e\n\u003cp\u003eAfter talking with customers, it was decided that the stick should have a power of 2 number of pixels and 8 was a good compromise.   The more important feature of this choice is that the board is symmetrical in every direction so they can be evenly stacked to create larger displays.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5584_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eBuilding Larger Displays from the 8 Pixel Stick\u003c\/h2\u003e\n\u003cp\u003eSince the stick is symmetrical, building larger displays with the 8 Pixel Stick is simple.   You mount the sticks next to each other and then daisy chain them together using Grove connectors.   Large displays will take more power than can be supplied by a computer, so you may have to feed 5V into the provided pins.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_0058_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_8PixelStrip\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-05-06T16:47:14-07:00","created_at":"2018-05-06T16:47:45-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":2495,"price_min":2495,"price_max":2495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9101159104556,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0613-5PACK8PIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"5 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors","public_title":null,"options":["Default Title"],"price":2495,"weight":57,"compare_at_price":null,"inventory_quantity":64,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728631","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0058_42b262dd-fff8-4a7c-851f-2a05513773c3.JPG?v=1525650702","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5584_2_f4e7e707-2077-4cc4-a411-3ee18e8b4407.JPG?v=1525650702","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5585_2_e333be94-8d05-49fe-b4d6-6b7ec7ff3e89.JPG?v=1525650702","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_67c3f70a-948d-4544-aab0-f3885fbe2efc.JPG?v=1525650702","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickBackAnno_25979b95-9bb6-4935-8e53-141307621410.jpg?v=1525650702","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickFrontAnno_3feffad0-e070-4500-a3db-46d78bf3d658.jpg?v=1525650702"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0058_42b262dd-fff8-4a7c-851f-2a05513773c3.JPG?v=1525650702","options":["Title"],"media":[{"alt":null,"id":1427439550508,"position":1,"preview_image":{"aspect_ratio":0.797,"height":1905,"width":1519,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0058_42b262dd-fff8-4a7c-851f-2a05513773c3.JPG?v=1525650702"},"aspect_ratio":0.797,"height":1905,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0058_42b262dd-fff8-4a7c-851f-2a05513773c3.JPG?v=1525650702","width":1519},{"alt":null,"id":1427439452204,"position":2,"preview_image":{"aspect_ratio":3.006,"height":697,"width":2095,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5584_2_f4e7e707-2077-4cc4-a411-3ee18e8b4407.JPG?v=1525650702"},"aspect_ratio":3.006,"height":697,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5584_2_f4e7e707-2077-4cc4-a411-3ee18e8b4407.JPG?v=1525650702","width":2095},{"alt":null,"id":1427439484972,"position":3,"preview_image":{"aspect_ratio":3.565,"height":628,"width":2239,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5585_2_e333be94-8d05-49fe-b4d6-6b7ec7ff3e89.JPG?v=1525650702"},"aspect_ratio":3.565,"height":628,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5585_2_e333be94-8d05-49fe-b4d6-6b7ec7ff3e89.JPG?v=1525650702","width":2239},{"alt":null,"id":1427439517740,"position":4,"preview_image":{"aspect_ratio":1.778,"height":1080,"width":1920,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_67c3f70a-948d-4544-aab0-f3885fbe2efc.JPG?v=1525650702"},"aspect_ratio":1.778,"height":1080,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5642_2_67c3f70a-948d-4544-aab0-f3885fbe2efc.JPG?v=1525650702","width":1920},{"alt":null,"id":1427439583276,"position":5,"preview_image":{"aspect_ratio":3.565,"height":628,"width":2239,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickBackAnno_25979b95-9bb6-4935-8e53-141307621410.jpg?v=1525650702"},"aspect_ratio":3.565,"height":628,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickBackAnno_25979b95-9bb6-4935-8e53-141307621410.jpg?v=1525650702","width":2239},{"alt":null,"id":1427439616044,"position":6,"preview_image":{"aspect_ratio":3.006,"height":697,"width":2095,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickFrontAnno_3feffad0-e070-4500-a3db-46d78bf3d658.jpg?v=1525650702"},"aspect_ratio":3.006,"height":697,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8StickFrontAnno_3feffad0-e070-4500-a3db-46d78bf3d658.jpg?v=1525650702","width":2095}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e5 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our 5 pack of 8 Pixel Programmable RGBW Strips.  This is a small chainable board with eight 5050 SK6812RGBW RGBW LEDs. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/8StickFrontAnno_large.jpg?v=1525631072\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/copy-of-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a single Pixel board here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis stick is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach 8 Pixel stick has two Grove connectors.  One for input and then one for output.   To chain the stick you connect the output of one stick to the input of another stick and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan\u003e\u003c\/span\u003eWhy a strip of 8?\u003c\/h2\u003e\n\u003cp\u003eAfter talking with customers, it was decided that the stick should have a power of 2 number of pixels and 8 was a good compromise.   The more important feature of this choice is that the board is symmetrical in every direction so they can be evenly stacked to create larger displays.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5584_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eBuilding Larger Displays from the 8 Pixel Stick\u003c\/h2\u003e\n\u003cp\u003eSince the stick is symmetrical, building larger displays with the 8 Pixel Stick is simple.   You mount the sticks next to each other and then daisy chain them together using Grove connectors.   Large displays will take more power than can be supplied by a computer, so you may have to feed 5V into the provided pins.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_0058_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e8 Pixel Stick Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_8PixelStrip\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(9101159104556, { variant: {"id":9101159104556,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0613-5PACK8PIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"5 Pack - 8 Pixel RGBW Chainable Stick with Grove Connectors","public_title":null,"options":["Default Title"],"price":2495,"weight":57,"compare_at_price":null,"inventory_quantity":64,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728631","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 64, product_id: 880308650028, product_handle: "5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors", price: 2495, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("ultimate-solar-powered-wifi-night-light-kit-bc24-and-esp32", 1154367488044, {"id":1154367488044,"title":"Ultimate Solar Powered WiFi Night Light Kit (BC24 and ESP32)","handle":"ultimate-solar-powered-wifi-night-light-kit-bc24-and-esp32","description":"\u003ch1\u003eUltimate Solar Powered WiFi Night Light Kit (BC24 and ESP32)  - No Soldering\u003c\/h1\u003e\n\u003cp\u003eHere is your chance to build a solar powered  WiFi remote control ESP32 based nightlight for use outdoors.   This kit comes with mounting pylons and a water proof enclosure.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eThis is a great beginners Kit!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is an easy to build kit with no soldering required.   \u003c\/p\u003e\n\u003cp\u003eThe Kit contains the powerful ESP32 dual core processor mounted on the BC24 24 RGBW Programmable LED board with Grove Connectors!   No Soldering!\u003c\/p\u003e\n\u003cp\u003eA full step-by-step Instruction Manual is supplied.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eSolar Powered\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eESP32 based\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eWiFi Connected\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eMonitors and reports:   \u003cstrong\u003eSolar Panel Voltage and Current \/ Battery Voltage and Current \/ System Voltage and Current\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eFull featured REST interface - Do All sorts of things!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eCan read Solar Data from the device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eHas three modes of display.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eRainbow, Clock and Fire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eCan be turned on during the daylight\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHere is the block diagram:\u003c\/h3\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_1301_large.JPG?v=1534534779\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCheck out the video below:\u003c\/h3\u003e\n\u003cp\u003e (coming soon)\u003c\/p\u003e\n\u003ch3\u003eIncluded Parts List:\u003c\/h3\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003eBC24\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0600-BIGCIRCLE32-DSBT)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eSunAIrPlus\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0040-SAP-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eSolar Panel - 330mA \/ 6V\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0111-SC330-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eMulti Solar Panel Connector Board\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0230-MSPCB-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eUSB A to Micro Cable\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0121-USBAM-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003e1 Grove Female Headers to Grove Connector Cable\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0074-GRVCABFEM-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eBox of M3 120 PC Spacers\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0670-M3NYLON-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eUV 172mm Waterproof Enclosure\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0674-BOX172-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eNOTE:\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eA LiPo battery is NOT included due to shipping restrictions.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eWe suggest a 6600mAh battery with a JST2 connector such as:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s2\"\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/353\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eSmaller batteries will work too.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e2000mAh - \u003ca href=\"https:\/\/www.adafruit.com\/product\/2011\"\u003e\u003cspan class=\"s2\"\u003ehttps:\/\/www.adafruit.com\/product\/2011\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e2200mAh - https:\/\/www.adafruit.com\/product\/1781\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e4400mAh - \u003ca href=\"https:\/\/www.adafruit.com\/product\/354\"\u003e\u003cspan class=\"s2\"\u003ehttps:\/\/www.adafruit.com\/product\/354\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eNOTE:\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe 3D Solar Panel Stand is not included in the kit.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eHowever, you can download the 3D Print files from the SwitchDoc Labs Solar Panel Night Light Kit product page to print your own.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eWe also sell a 3D Print of the Solar Panel holders for those without a 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003ca href=\"NOTE:%20%20The%203D%20Solar%20Panel%20Stand%20is%20not%20included%20in%20the%20kit.%20%20However,%20you%20can%20download%20the%203D%20Print%20files%20from%20the%20SwitchDoc%20Labs%20Solar%20Panel%20Night%20Light%20Kit%20product%20page%20to%20print%20your%20own.%20%20We%20also%20sell%20a%203D%20Print%20of%20the%20Solar%20Panel%20holders%20for%20those%20without%20a%203D%20Printer.%20%20https:\/\/shop.switchdoc.com\/products\/copy-of-3d-print-for-bc24-solar-powered-night-light-kit%20%20NOTE:%20%20A%20LiPo%20battery%20is%20NOT%20included%20due%20to%20shipping%20restrictions.%20%20We%20suggest%20a%206600mAh%20battery%20with%20a%20JST2%20connector%20such%20as:%20%20https:\/\/www.adafruit.com\/product\/353%20%20Smaller%20batteries%20will%20work%20too.%20%202000mAh%20-%20https:\/\/www.adafruit.com\/product\/2011%20%202200mAh%20-%20https:\/\/www.adafruit.com\/product\/1781%20%204400mAh%20-%20https:\/\/www.adafruit.com\/product\/354\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan class=\"s1\"\u003ehttps:\/\/shop.switchdoc.com\/products\/copy-of-3d-print-for-bc24-solar-powered-night-light-kit\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp\u003eThe software monitors the solar voltage and turns the display off when the solar panels hit 2.0V.  Saves a bunch of power.\u003c\/p\u003e\n\u003ch2\u003e Downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/BC24SolarNightLightAssemblyOperationl1.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull Step-By-Step Assembly Manual  and Operations Manual for the Solar Powered Night Light\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_SOLARNL\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull ESP32 Source Code for SOLARNL for the Arduino IDE\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/SOLARNLSolarBracket.zip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3D Print Files for Solar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/copy-of-3d-print-for-bc24-solar-powered-night-light-kit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePrinted 3D Print Files for Solar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow To Compile Source Code\u003c\/h2\u003e\n\u003cp\u003eSee Assembly Operations Manual above.\u003c\/p\u003e\n\u003ch2\u003eExample REST JSON Output\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eOpen a browser (Safari or Chrome has been tested) and type:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003e\u003cspan class=\"s2\"\u003e\u003ca href=\"http:\/\/192.168.1.154\/\"\u003ehttp:\/\/192.168.1.154\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eyou will get (assuming you have the right IP Address)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cstrong\u003e\u003cspan class=\"s1\"\u003e{\"variables\": {\"solarVoltage\": 1.52, \"batteryVoltage\": 4.14, \"solarCurrent\": 0.00, \"batteryCurrent\": 2.40, \"loadCurrent\": 1.20, \"loadVoltage\": 4.97, \"currentLEDMode\": 0, \"darkLight\": 0, \"Version\": \"005\"}, \"id\": \"\", \"name\": \"SDL_ESP32_BC24_SOLARNL\", \"hardware\": \"esp32\", \"connected\": true}\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eAll of the BC24 Solar Power Night Light commends return fully formatted JSON data which makes it easy to parse and get the values you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eData! Data! Data! More Cowbell!\u003c\/h2\u003e\n\u003cp\u003eSunAirPlus includes an I2C\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"SunAirPlus Solar Power – INA3221 Python Raspberry Pi Library Released\" href=\"http:\/\/www.switchdoc.com\/2015\/03\/sunairplus-solar-power-ina3221-python-raspberry-pi-library-released\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eINA3221\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e3 Channel Current \/ Voltage Monitor and a I2C 4 channel 12 bit Analog to Digital Converter (ADS1015). The INA3221 allows you to monitor all of the major currents and voltages in the system (Battery \/ Solar Panels \/ Load - Computer ). You can tell what your solar power project is doing in real time. Here are some results from the SunAirPlus board using the onboard INA3221. You can see that the battery is almost fully charged and the solar cell voltage (actually a variable power supply on the test bench) is 5.19V and it is supplying 735mA. The Output voltage is 4.88V because we are fiddling with the board. The Library works like a champ.\u003c\/p\u003e\n\u003cpre\u003eTest SDL_Pi_INA3221 Version 1.0 - SwitchDoc Labs\n\nSample uses 0x40 and SunAirPlus board INA3221\nWill work with the INA3221 SwitchDoc Labs Breakout Board\n\n\n------------------------------\nLIPO_Battery Bus Voltage: 4.15 V \nLIPO_Battery Shunt Voltage: -9.12 mV \nLIPO_Battery Load Voltage: 4.14 V\nLIPO_Battery Current 1: 91.20 mA\n\nSolar Cell Bus Voltage 2: 5.19 V \nSolar Cell Shunt Voltage 2: -73.52 mV \nSolar Cell Load Voltage 2: 5.12 V\nSolar Cell Current 2: 735.20 mA\n\nOutput Bus Voltage 3: 4.88 V \nOutput Shunt Voltage 3: 48.68 mV \nOutput Load Voltage 3: 4.93 V\nOutput Current 3: 486.80 mA\u003c\/pre\u003e\n\u003ch2\u003eREST Variables\u003c\/h2\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003e\u003cb\u003eBC24 Solar Powered Night Light REST Variables\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esolarVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSolar Panel Voltage in Volts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003ebatteryVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eBattery Voltage in Volts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esolarCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSolar Panel Current in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003ebatteryCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eBattery Current in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eloadCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eLoad (BC24) Current in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eloadVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eLoad (BC24) Voltage in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003ecurrentLEDMode\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eNumeric Value of current LED Mode for the BC24 (see below)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003edarkLight\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eState of the darkLight Variable - 0 for dark, 1 for light.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eOnly affects Clock\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003ebrightness in V004\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eVersion\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eReturns the version of the software, formatted as “VXXX” (V004 for example)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eREST Commands (use across WiFi with Browser)\u003c\/h2\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eREST Commands\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eFunction\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eDesc\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eParameters\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eReturns\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003esetAdminPassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereset Administration Password\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003e\u003ca href=\"http:\/\/192.168.1.118\/setAdminPassword?params=oldpassword,newpassword\"\u003e\u003cu\u003ehttp:\/\/192.168.1.118\/setAdminPassword?params=oldpassword,newpassword\u003c\/u\u003e\u003cspan\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eParameters are old and new password, separated by a “,”\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value will be 1 if the command succeeded and 0 if it did not (such as invalid password)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eclock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSets the mode for the BC24 Clock Display. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/clock?params=adminpassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003erainbow\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSets the mode for the BC24 Rainbow Display. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/rainbow?params=adminpassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003efire\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSets the mode for the BC24 Fire Display. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/fire?params=adminpassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esetDarkLight\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eSets the BC24 LEDs Darker (0) or Brighter (1)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/setDarkLight?params=adminpassword, mode\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eFirst Parameter is administration password. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eSecond parameter is “0” or “1”\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eAs of V005, only affects Clock Brightness\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esetClockTimeOffsetToUTC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eSets Time Offset to seconds from UTC.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eFor example, Pacific Standard Time is -25200\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/setClockTimeOffsetToUTC?params=adminpassword, offset\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eParameter is administration password\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esetTurnOn\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eOverrides the check for Solar Panel Voltage \u0026lt; 2.0V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/setTurnOn?params=adminpassword, mode\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eParameter is administration password \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eled\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eSets the LED Connected\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eon the BC24 to On (“0”) or Off (“1”) Note - V005 will also blink this LED when the ESP32 is running\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003e\u003ca href=\"http:\/\/192.168.1.154\/led?params=1\"\u003e\u003cu\u003ehttp:\/\/192.168.1.154\/led?params=1\u003c\/u\u003e\u003cspan\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eReturn value is 1.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eValues other than 0 and 1 have no effect.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2018-08-17T11:59:40-07:00","created_at":"2018-08-17T12:00:21-07:00","vendor":"SwitchDoc Labs","type":"","tags":["BC24","esp32","kit","solar power"],"price":10900,"price_min":10900,"price_max":10900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11165638557740,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0316-BC24SNL-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimate Solar Powered WiFi Night Light Kit (BC24 and ESP32)","public_title":null,"options":["Default Title"],"price":10900,"weight":907,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728761","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7143_382ec2b5-643b-425a-88b7-7405943d7dde.JPG?v=1534534925","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1301.JPG?v=1534534925","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7136.JPG?v=1534534925","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7182_2.JPG?v=1534534925","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/HTB1X48BeLImBKNjSZFlq6A43FXaC_ba05749e-06ee-4ccf-aff4-78f40b4579ea.jpg?v=1534534925","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/s-l1600-6_fe92f65a-6e8f-4070-b246-e7c97366558a.jpg?v=1534534925"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7143_382ec2b5-643b-425a-88b7-7405943d7dde.JPG?v=1534534925","options":["Title"],"media":[{"alt":null,"id":1769780215852,"position":1,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7143_382ec2b5-643b-425a-88b7-7405943d7dde.JPG?v=1534534925"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7143_382ec2b5-643b-425a-88b7-7405943d7dde.JPG?v=1534534925","width":3024},{"alt":null,"id":1769779429420,"position":2,"preview_image":{"aspect_ratio":1.274,"height":1045,"width":1331,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1301.JPG?v=1534534925"},"aspect_ratio":1.274,"height":1045,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1301.JPG?v=1534534925","width":1331},{"alt":null,"id":1769780969516,"position":3,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7136.JPG?v=1534534925"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7136.JPG?v=1534534925","width":3024},{"alt":null,"id":1769782607916,"position":4,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7182_2.JPG?v=1534534925"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7182_2.JPG?v=1534534925","width":4032},{"alt":null,"id":1769782771756,"position":5,"preview_image":{"aspect_ratio":1.143,"height":700,"width":800,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/HTB1X48BeLImBKNjSZFlq6A43FXaC_ba05749e-06ee-4ccf-aff4-78f40b4579ea.jpg?v=1534534925"},"aspect_ratio":1.143,"height":700,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/HTB1X48BeLImBKNjSZFlq6A43FXaC_ba05749e-06ee-4ccf-aff4-78f40b4579ea.jpg?v=1534534925","width":800},{"alt":null,"id":1769785032748,"position":6,"preview_image":{"aspect_ratio":1.778,"height":900,"width":1600,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/s-l1600-6_fe92f65a-6e8f-4070-b246-e7c97366558a.jpg?v=1534534925"},"aspect_ratio":1.778,"height":900,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/s-l1600-6_fe92f65a-6e8f-4070-b246-e7c97366558a.jpg?v=1534534925","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eUltimate Solar Powered WiFi Night Light Kit (BC24 and ESP32)  - No Soldering\u003c\/h1\u003e\n\u003cp\u003eHere is your chance to build a solar powered  WiFi remote control ESP32 based nightlight for use outdoors.   This kit comes with mounting pylons and a water proof enclosure.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eThis is a great beginners Kit!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is an easy to build kit with no soldering required.   \u003c\/p\u003e\n\u003cp\u003eThe Kit contains the powerful ESP32 dual core processor mounted on the BC24 24 RGBW Programmable LED board with Grove Connectors!   No Soldering!\u003c\/p\u003e\n\u003cp\u003eA full step-by-step Instruction Manual is supplied.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eSolar Powered\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eESP32 based\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eWiFi Connected\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eMonitors and reports:   \u003cstrong\u003eSolar Panel Voltage and Current \/ Battery Voltage and Current \/ System Voltage and Current\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eFull featured REST interface - Do All sorts of things!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eCan read Solar Data from the device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eHas three modes of display.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eRainbow, Clock and Fire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eCan be turned on during the daylight\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHere is the block diagram:\u003c\/h3\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_1301_large.JPG?v=1534534779\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCheck out the video below:\u003c\/h3\u003e\n\u003cp\u003e (coming soon)\u003c\/p\u003e\n\u003ch3\u003eIncluded Parts List:\u003c\/h3\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003eBC24\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0600-BIGCIRCLE32-DSBT)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eSunAIrPlus\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0040-SAP-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eSolar Panel - 330mA \/ 6V\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0111-SC330-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eMulti Solar Panel Connector Board\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0230-MSPCB-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eUSB A to Micro Cable\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0121-USBAM-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003e1 Grove Female Headers to Grove Connector Cable\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0074-GRVCABFEM-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eBox of M3 120 PC Spacers\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0670-M3NYLON-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003eUV 172mm Waterproof Enclosure\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(0674-BOX172-DSBT)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eNOTE:\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eA LiPo battery is NOT included due to shipping restrictions.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eWe suggest a 6600mAh battery with a JST2 connector such as:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s2\"\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/353\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eSmaller batteries will work too.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e2000mAh - \u003ca href=\"https:\/\/www.adafruit.com\/product\/2011\"\u003e\u003cspan class=\"s2\"\u003ehttps:\/\/www.adafruit.com\/product\/2011\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e2200mAh - https:\/\/www.adafruit.com\/product\/1781\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e4400mAh - \u003ca href=\"https:\/\/www.adafruit.com\/product\/354\"\u003e\u003cspan class=\"s2\"\u003ehttps:\/\/www.adafruit.com\/product\/354\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eNOTE:\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe 3D Solar Panel Stand is not included in the kit.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eHowever, you can download the 3D Print files from the SwitchDoc Labs Solar Panel Night Light Kit product page to print your own.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eWe also sell a 3D Print of the Solar Panel holders for those without a 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003ca href=\"NOTE:%20%20The%203D%20Solar%20Panel%20Stand%20is%20not%20included%20in%20the%20kit.%20%20However,%20you%20can%20download%20the%203D%20Print%20files%20from%20the%20SwitchDoc%20Labs%20Solar%20Panel%20Night%20Light%20Kit%20product%20page%20to%20print%20your%20own.%20%20We%20also%20sell%20a%203D%20Print%20of%20the%20Solar%20Panel%20holders%20for%20those%20without%20a%203D%20Printer.%20%20https:\/\/shop.switchdoc.com\/products\/copy-of-3d-print-for-bc24-solar-powered-night-light-kit%20%20NOTE:%20%20A%20LiPo%20battery%20is%20NOT%20included%20due%20to%20shipping%20restrictions.%20%20We%20suggest%20a%206600mAh%20battery%20with%20a%20JST2%20connector%20such%20as:%20%20https:\/\/www.adafruit.com\/product\/353%20%20Smaller%20batteries%20will%20work%20too.%20%202000mAh%20-%20https:\/\/www.adafruit.com\/product\/2011%20%202200mAh%20-%20https:\/\/www.adafruit.com\/product\/1781%20%204400mAh%20-%20https:\/\/www.adafruit.com\/product\/354\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan class=\"s1\"\u003ehttps:\/\/shop.switchdoc.com\/products\/copy-of-3d-print-for-bc24-solar-powered-night-light-kit\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp\u003eThe software monitors the solar voltage and turns the display off when the solar panels hit 2.0V.  Saves a bunch of power.\u003c\/p\u003e\n\u003ch2\u003e Downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/BC24SolarNightLightAssemblyOperationl1.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull Step-By-Step Assembly Manual  and Operations Manual for the Solar Powered Night Light\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_BC24_SOLARNL\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull ESP32 Source Code for SOLARNL for the Arduino IDE\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/SOLARNLSolarBracket.zip\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3D Print Files for Solar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/copy-of-3d-print-for-bc24-solar-powered-night-light-kit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePrinted 3D Print Files for Solar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow To Compile Source Code\u003c\/h2\u003e\n\u003cp\u003eSee Assembly Operations Manual above.\u003c\/p\u003e\n\u003ch2\u003eExample REST JSON Output\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eOpen a browser (Safari or Chrome has been tested) and type:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003e\u003cspan class=\"s2\"\u003e\u003ca href=\"http:\/\/192.168.1.154\/\"\u003ehttp:\/\/192.168.1.154\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eyou will get (assuming you have the right IP Address)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cstrong\u003e\u003cspan class=\"s1\"\u003e{\"variables\": {\"solarVoltage\": 1.52, \"batteryVoltage\": 4.14, \"solarCurrent\": 0.00, \"batteryCurrent\": 2.40, \"loadCurrent\": 1.20, \"loadVoltage\": 4.97, \"currentLEDMode\": 0, \"darkLight\": 0, \"Version\": \"005\"}, \"id\": \"\", \"name\": \"SDL_ESP32_BC24_SOLARNL\", \"hardware\": \"esp32\", \"connected\": true}\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eAll of the BC24 Solar Power Night Light commends return fully formatted JSON data which makes it easy to parse and get the values you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eData! Data! Data! More Cowbell!\u003c\/h2\u003e\n\u003cp\u003eSunAirPlus includes an I2C\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"SunAirPlus Solar Power – INA3221 Python Raspberry Pi Library Released\" href=\"http:\/\/www.switchdoc.com\/2015\/03\/sunairplus-solar-power-ina3221-python-raspberry-pi-library-released\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eINA3221\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e3 Channel Current \/ Voltage Monitor and a I2C 4 channel 12 bit Analog to Digital Converter (ADS1015). The INA3221 allows you to monitor all of the major currents and voltages in the system (Battery \/ Solar Panels \/ Load - Computer ). You can tell what your solar power project is doing in real time. Here are some results from the SunAirPlus board using the onboard INA3221. You can see that the battery is almost fully charged and the solar cell voltage (actually a variable power supply on the test bench) is 5.19V and it is supplying 735mA. The Output voltage is 4.88V because we are fiddling with the board. The Library works like a champ.\u003c\/p\u003e\n\u003cpre\u003eTest SDL_Pi_INA3221 Version 1.0 - SwitchDoc Labs\n\nSample uses 0x40 and SunAirPlus board INA3221\nWill work with the INA3221 SwitchDoc Labs Breakout Board\n\n\n------------------------------\nLIPO_Battery Bus Voltage: 4.15 V \nLIPO_Battery Shunt Voltage: -9.12 mV \nLIPO_Battery Load Voltage: 4.14 V\nLIPO_Battery Current 1: 91.20 mA\n\nSolar Cell Bus Voltage 2: 5.19 V \nSolar Cell Shunt Voltage 2: -73.52 mV \nSolar Cell Load Voltage 2: 5.12 V\nSolar Cell Current 2: 735.20 mA\n\nOutput Bus Voltage 3: 4.88 V \nOutput Shunt Voltage 3: 48.68 mV \nOutput Load Voltage 3: 4.93 V\nOutput Current 3: 486.80 mA\u003c\/pre\u003e\n\u003ch2\u003eREST Variables\u003c\/h2\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003e\u003cb\u003eBC24 Solar Powered Night Light REST Variables\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esolarVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSolar Panel Voltage in Volts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003ebatteryVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eBattery Voltage in Volts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esolarCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSolar Panel Current in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003ebatteryCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eBattery Current in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eloadCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eLoad (BC24) Current in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eloadVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eLoad (BC24) Voltage in mA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003ecurrentLEDMode\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eNumeric Value of current LED Mode for the BC24 (see below)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003edarkLight\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eState of the darkLight Variable - 0 for dark, 1 for light.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eOnly affects Clock\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003ebrightness in V004\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eVersion\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eReturns the version of the software, formatted as “VXXX” (V004 for example)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eREST Commands (use across WiFi with Browser)\u003c\/h2\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eREST Commands\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eFunction\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eDesc\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eParameters\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"5\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: x-large;\"\u003e\u003cb\u003eReturns\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003esetAdminPassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereset Administration Password\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003e\u003ca href=\"http:\/\/192.168.1.118\/setAdminPassword?params=oldpassword,newpassword\"\u003e\u003cu\u003ehttp:\/\/192.168.1.118\/setAdminPassword?params=oldpassword,newpassword\u003c\/u\u003e\u003cspan\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eParameters are old and new password, separated by a “,”\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value will be 1 if the command succeeded and 0 if it did not (such as invalid password)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eclock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSets the mode for the BC24 Clock Display. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/clock?params=adminpassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003erainbow\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSets the mode for the BC24 Rainbow Display. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/rainbow?params=adminpassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003efire\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eSets the mode for the BC24 Fire Display. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/fire?params=adminpassword\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esetDarkLight\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eSets the BC24 LEDs Darker (0) or Brighter (1)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/setDarkLight?params=adminpassword, mode\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eFirst Parameter is administration password. \u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eSecond parameter is “0” or “1”\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eAs of V005, only affects Clock Brightness\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esetClockTimeOffsetToUTC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eSets Time Offset to seconds from UTC.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eFor example, Pacific Standard Time is -25200\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/setClockTimeOffsetToUTC?params=adminpassword, offset\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eParameter is administration password\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003esetTurnOn\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eOverrides the check for Solar Panel Voltage \u0026lt; 2.0V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ehttp:\/\/192.168.1.154\/setTurnOn?params=adminpassword, mode\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eParameter is administration password \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003ereturn_value is 1 if it succeeds or 0 if the password fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eled\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp align=\"center\"\u003e\u003cspan face=\"Helvetica\" size=\"3\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: medium;\"\u003eSets the LED Connected\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eon the BC24 to On (“0”) or Off (“1”) Note - V005 will also blink this LED when the ESP32 is running\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003e\u003ca href=\"http:\/\/192.168.1.154\/led?params=1\"\u003e\u003cu\u003ehttp:\/\/192.168.1.154\/led?params=1\u003c\/u\u003e\u003cspan\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cp\u003e\u003cspan face=\"Helvetica\" size=\"2\" color=\"#000000\" style=\"color: #000000; font-family: Helvetica; font-size: small;\"\u003eReturn value is 1.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eValues other than 0 and 1 have no effect.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(11165638557740, { variant: {"id":11165638557740,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0316-BC24SNL-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimate Solar Powered WiFi Night Light Kit (BC24 and ESP32)","public_title":null,"options":["Default Title"],"price":10900,"weight":907,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728761","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: -1, product_id: 1154367488044, product_handle: "ultimate-solar-powered-wifi-night-light-kit-bc24-and-esp32", price: 10900, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("12-pack-of-single-pixel-rgbw-chainable-with-grove-connectors", 947096518700, {"id":947096518700,"title":"20 Pack of Single Pixel RGBW Chainable with Grove Connectors","handle":"12-pack-of-single-pixel-rgbw-chainable-with-grove-connectors","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003e20 Pack of Single Pixel RGBW Chainable with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our 20 Pack of single Pixel Programmable RGBW.  This is a small chainable board with one 5050 SK6812RGBW RGBW LED. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5587_large.JPG?v=1527448533\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003eSee a Single Pixels here.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003e\u003cspan\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick and Pixel is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Pixel is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach  Pixel has two Grove connectors.  One for input and then one for output.   To chain the Pixel you connect the output of one pixell or stick to the input of another stick or Pixel and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e                   \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\"\u003e8 Pixel Stick Specification\u003c\/a\u003e                        \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"Raspberry%20Pi%20Driver\" target=\"_blank\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-05-06T16:47:14-07:00","created_at":"2018-05-27T12:33:11-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":1895,"price_min":1895,"price_max":1895,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9471395332140,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0611-20GRVSINPIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"20 Pack of Single Pixel RGBW Chainable with Grove Connectors","public_title":null,"options":["Default Title"],"price":1895,"weight":28,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728655","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587_9a0ce3ab-a7ee-4caa-abbb-effac8037cf7.JPG?v=1605924001","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_979e8725-77ef-4b27-a4d0-3be178255072.JPG?v=1605924001","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy_16ca4722-3e81-4096-b7b0-9d04f9e5ef72.JPG?v=1605924001"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587_9a0ce3ab-a7ee-4caa-abbb-effac8037cf7.JPG?v=1605924001","options":["Title"],"media":[{"alt":null,"id":1532069150764,"position":1,"preview_image":{"aspect_ratio":1.388,"height":595,"width":826,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587_9a0ce3ab-a7ee-4caa-abbb-effac8037cf7.JPG?v=1605924001"},"aspect_ratio":1.388,"height":595,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5587_9a0ce3ab-a7ee-4caa-abbb-effac8037cf7.JPG?v=1605924001","width":826},{"alt":null,"id":1532069183532,"position":2,"preview_image":{"aspect_ratio":1.214,"height":693,"width":841,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_979e8725-77ef-4b27-a4d0-3be178255072.JPG?v=1605924001"},"aspect_ratio":1.214,"height":693,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_979e8725-77ef-4b27-a4d0-3be178255072.JPG?v=1605924001","width":841},{"alt":null,"id":1532069216300,"position":3,"preview_image":{"aspect_ratio":1.214,"height":693,"width":841,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy_16ca4722-3e81-4096-b7b0-9d04f9e5ef72.JPG?v=1605924001"},"aspect_ratio":1.214,"height":693,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5588_copy_16ca4722-3e81-4096-b7b0-9d04f9e5ef72.JPG?v=1605924001","width":841}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003e20 Pack of Single Pixel RGBW Chainable with Grove Connectors\u003c\/h1\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is our 20 Pack of single Pixel Programmable RGBW.  This is a small chainable board with one 5050 SK6812RGBW RGBW LED. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5587_large.JPG?v=1527448533\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.\u003c\/p\u003e\n\u003cp\u003eSee a Single Pixels here.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/5-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003eSee a 5 pack of 8 Pixel Sticks here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10-pack-8-pixel-rgbw-chainable-stick-with-grove-connectors\"\u003e\u003cspan\u003eSee a 10 pack of 8 Pixel Sticks here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach stick and Pixel is carefully sized so you can build evenly spaced larger displays out of these sticks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Pixel is NeoPixel compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach  Pixel has two Grove connectors.  One for input and then one for output.   To chain the Pixel you connect the output of one pixell or stick to the input of another stick or Pixel and then so on.  No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5642_2_large.JPG?v=1525612727\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e                   \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDL8PixelStick050618.pdf\" target=\"_blank\"\u003e8 Pixel Stick Specification\u003c\/a\u003e                        \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SK6812RGBW-datasheet.pdf\" target=\"_blank\"\u003eSK6812RGBW Specification\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"Raspberry%20Pi%20Driver\" target=\"_blank\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_8PixelStrip\" target=\"_blank\"\u003eESP8266 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_8PixelStrip\" target=\"_blank\"\u003eArduino Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_8PixelStrip\" target=\"_blank\"\u003eESP32 Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eWhat is a NeoPixel?\u003c\/h2\u003e\n\u003cp\u003e \u003cspan\u003eNeoPixels (Trademark of Adafruit)\u003c\/span\u003e\u003cspan\u003e are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  \u003c\/span\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(9471395332140, { variant: {"id":9471395332140,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0611-20GRVSINPIX-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"20 Pack of Single Pixel RGBW Chainable with Grove Connectors","public_title":null,"options":["Default Title"],"price":1895,"weight":28,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728655","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 947096518700, product_handle: "12-pack-of-single-pixel-rgbw-chainable-with-grove-connectors", price: 1895, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.metafields = window.BOLD.common.Shopify.metafields || {};window.BOLD.common.Shopify.metafields["bold_rp"] = {};window.BOLD.common.Shopify.metafields["bold_csp_defaults"] = {};

Single Pixel RGBW Chainable with Grove Connectors
Single Pixel RGBW Chainable with Grove Connectors
Single Pixel RGBW Chainable with Grove Connectors

Single Pixel RGBW Chainable with Grove Connectors

$1.60
$1.60

SIngle Pixel RGBW Chainable with Grove Connectors

This is our single Pixel Programmable RGBW Strip.  This is a small chainable board with one 5050 SK6812RGBW RGBW LED. The SK6812s are each individually addressable as the driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires near 5V.

Each Pixel is controlled by a daisy-chained serial bit.  All four LEDs (RGBW) are controllable with an 8 bit value, giving a total of 32 bits per pixel.   They can be driven by a GPIO line, but the timing is tricky so we have suppled the libraries below to get you going.

See a 12 Pack of Single Pixels here.

See a 5 pack of 8 Pixel Sticks here.

See a 10 pack of 8 Pixel Sticks here.

Each stick and Pixel is carefully sized so you can build evenly spaced larger displays out of these sticks.

This Pixel is NeoPixel compatible.

Each  Pixel has two Grove connectors.  One for input and then one for output.   To chain the Pixel you connect the output of one pixell or stick to the input of another stick or Pixel and then so on.  No soldering required!

 

                   

Downloads

8 Pixel Stick Specification                        

SK6812RGBW Specification

Raspberry Pi Driver

ESP8266 Driver

Arduino Driver

ESP32 Driver

 

 

What is a NeoPixel?

 NeoPixels (Trademark of Adafruit) are what component maker and seller Adafruit calls RGBW (Red, Green, Blue, White) LEDs with integrated controllers.  

Back to LEDs and Pixels