window.BOLD.common.Shopify.saveProduct("copy-of-usb-submersible-water-pump", 5337119293607, {"id":5337119293607,"title":"4 PACK - USB Submersible Water Pumps","handle":"copy-of-usb-submersible-water-pump","description":"\u003ch1\u003e 4-PACK USB Submersible Water Pumps\u003c\/h1\u003e\n\u003cp\u003eThis is a \u003cstrong\u003efour pack bundle\u003c\/strong\u003e of USB Submersible water Pumps\u003c\/p\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a USB Port\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering , aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e","published_at":"2020-06-15T14:12:12-07:00","created_at":"2020-06-15T14:12:12-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,Raspberry Pi,Arduino,ESP8266,USB","tags":["Garden"],"price":3795,"price_min":3795,"price_max":3795,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34733553877159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0243-4PACKUSBPMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"4 PACK - USB Submersible Water Pumps","public_title":null,"options":["Default Title"],"price":3795,"weight":283,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_3523ee13-dedf-43d6-add8-7b3dd46200af.jpg?v=1592255534"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534","options":["Title"],"media":[{"alt":null,"id":9600332562599,"position":1,"preview_image":{"aspect_ratio":0.867,"height":916,"width":794,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534"},"aspect_ratio":0.867,"height":916,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534","width":794},{"alt":"Grove Computer Controlled USB Submersible Water Pump","id":9600332595367,"position":2,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_3523ee13-dedf-43d6-add8-7b3dd46200af.jpg?v=1592255534"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_3523ee13-dedf-43d6-add8-7b3dd46200af.jpg?v=1592255534","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e 4-PACK USB Submersible Water Pumps\u003c\/h1\u003e\n\u003cp\u003eThis is a \u003cstrong\u003efour pack bundle\u003c\/strong\u003e of USB Submersible water Pumps\u003c\/p\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a USB Port\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering , aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(34733553877159, { variant: {"id":34733553877159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0243-4PACKUSBPMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"4 PACK - USB Submersible Water Pumps","public_title":null,"options":["Default Title"],"price":3795,"weight":283,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 5337119293607, product_handle: "copy-of-usb-submersible-water-pump", price: 3795, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.apps_installed = {"Product Upsell":3} || {};window.BOLD.common.Shopify.saveProduct("suncontrol-advanced-solar-controller-charger-sun-tracker-data-gathering-grove-header", 229362958366, {"id":229362958366,"title":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header","handle":"suncontrol-advanced-solar-controller-charger-sun-tracker-data-gathering-grove-header","description":"\u003ch1 id=\"h:suncontrol-diy-solar\"\u003eSunControl - DIY Solar Power for Arduino and Raspberry Pi Projects\u003c\/h1\u003e\n\u003cp\u003eEver wanted to build your own Solar Powered Raspberry Pi or Arduino project? You\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003cstrong\u003eCAN\u003c\/strong\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003ebuild your own solar powered projects. We have combined three popular boards for solar systems into one inexpensive package. \u003c\/p\u003e\n\u003cp\u003eWe combined the USB PowerControl, SunAirPlus and the SwitchDoc Labs Watchdog Timer into one board. We removed a couple of features that most users weren't using (and can be done by inexpensive other boards), specifically the space for the servo chip and the second A\/D converter. We found that most customers were using timing to do sun tracking rather than optical tracking. Makes sense!\u003c\/p\u003e\n\u003cp\u003eSunControl is customizable with your software and hardware. Note that the battery and solar panel plugs on SunControl are of type JST-PH 2 pin.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWhen using the SunControl board, you need to look at the VOC (Voltage Open Circuit) of any other solar panel you have. If it is above 6V, you need to add in a 10W 5.6V Zener diode across the solar panels to protect your SunControl board and system. Connect the \"+\" end of the diode to the \"+\" side of the solar panel (or the line from the solar panel to the SunControl Board) and the \"-\" side to the negative (\"-\") side of the panel. This will get hot, so let it hang free in the air.\u003c\/p\u003e\n\u003cp\u003eUnfortunately, you can’t just put 10 1W 5.6V Zener diodes in parallel. They aren’t identical and the one that is slightly lower will take all the current. You can, however, stack them in series to acquire the appropriate voltage and power dissipation. Such as stacking 2 5W 2.8V Zener diodes.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10w-5-6v-zener-diode\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can find such a Zener diode here.\u003c\/a\u003e \u003c\/p\u003e\n\u003ch1 id=\"h:suncontrol-allows-yo\"\u003eSunControl Allows you to:\u003c\/h1\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/6a33b1ae29ab5d489beab1393f7286f8_large.jpg?v=1508473505\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse Solar Power to Charge and Run Your small Computers\u003c\/li\u003e\n\u003cli\u003eMeasure and Monitor the Performance of your system.\u003c\/li\u003e\n\u003cli\u003eUnderstand what is happening in real time with your Solar Panels, batteries and computers!\u003c\/li\u003e\n\u003cli\u003eTurn your Raspberry Pi \/ Arduino on and off to avoid brownouts and SD Card damage\u003c\/li\u003e\n\u003cli\u003eUse the onboard Hardware WatchDog timer to dramatically improve your reliability of the your project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eNow Available - Protect your LiPo battery from cold and hot charging by adding a NTC Thermistor to SunControl\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/ntc-thermistor-10k-ohm-1-b3950-l75mm-wired-10k-ohm-metal-film-resistor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNTC Thermistor 10K ohm 1% B3950 L75mm Wired + 10K Ohm Metal Film Resistor (0450-NTCTHERM-DSBT)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2017\/08\/suncontrol-solar-controller-lipo-temperature-charging-control\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out this Article on the temperature control.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_SunControlThermistorTestAnno.png?5193565564105136973\" alt=\"\" width=\"509\" height=\"386\"\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:grove-connectors-mak\"\u003eGrove Connectors make it easy to hook up!\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"Apple-converted-space\"\u003e- Combines Three Boards (SunAirPlus, USB PowerControl and WatchDog Timer)\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"Apple-converted-space\"\u003e- \u003c\/span\u003eEasy to Use! No Soldering\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:solar-power-your-sys\"\u003e\u003cstrong\u003e\u003cem\u003e- Solar Power\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/em\u003eYour System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:charge-your-batterie\"\u003e\u003cstrong\u003e\u003cem\u003e- Charge\u003c\/em\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003eyour Batteries\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:control-your-compute\"\u003e\u003cstrong\u003e\u003cem\u003e- Control\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/em\u003eYour Computer Power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:gather-important-dat\"\u003e\u003cstrong\u003e\u003cem\u003e- Gather\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/em\u003eImportant Data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:improve-your-reliabi\"\u003e\u003cstrong\u003e\u003cem\u003e- Improve\u003c\/em\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003eYour Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:qi-wireless-charging\"\u003e\u003cstrong\u003e-\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003cem\u003eQi Wireless\u003c\/em\u003e Charging Too!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe major features of the SunControl board are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses 6V Solar Cells\u003c\/li\u003e\n\u003cli\u003eUse 3.7V LiPo Cells for batteries\u003c\/li\u003e\n\u003cli\u003eBuilt-In USB Port Power Control using Computer GPIO Control or Battery Sensing\u003c\/li\u003e\n\u003cli\u003eHas LiPo to 5V voltage boost built in\u003c\/li\u003e\n\u003cli\u003eDirectly powers Raspberry Pi \/ Arduino\u003c\/li\u003e\n\u003cli\u003eWorks Raspberry Pi (3.3V) GPIO and Arduino (5.0V) GPIO\u003c\/li\u003e\n\u003cli\u003eBuilt-in data gathering chips for system currents \/voltages\u003c\/li\u003e\n\u003cli\u003eCharges iPhones and other phones or devices\u003c\/li\u003e\n\u003cli\u003eApproximates an MPPT (Maximum Power Point Tracking) charging system\u003c\/li\u003e\n\u003cli\u003eComes with Grove connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eA Few Technical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1500 mA from Solar Panels (Max, self regulating)\u003c\/li\u003e\n\u003cli\u003e1000mA max instantaneous charge to LiPo Battery\u003c\/li\u003e\n\u003cli\u003e1000mA supply to 5V USB Connector\u003c\/li\u003e\n\u003cli\u003eUSB Hysterisis: Battery 3.7V turn on, 3.3 turn off (this prevents what is called called hammering - power turns on, computer uses power, battery voltage drops and power turns off. Battery recovers, turns on power, computer uses power, battery voltage goes down, shutting off power - rinse and repeat)\u003c\/li\u003e\n\u003cli\u003e3 Channel INA3221 based I2C Current Measurement - 12 bit, 3000 samples\/second 0.8 mA resolution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEven Qi Wireless Charging Works with SunControl\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003eWe hooked up a Qi Wireless charger to SunControl and got great results right off the bat. Think of the applications for robots!\u003c\/p\u003e\n\u003ch2\u003eApplication Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsing the SunControl WatchDog Timer (coming soon)\u003c\/li\u003e\n\u003cli\u003eUsing SunControl in a Raspberry Pi Solar Powered System (coming soon)\u003c\/li\u003e\n\u003cli\u003eUsing SunControl in an Arduino Solar Powered System (coming soon)\u003c\/li\u003e\n\u003cli\u003eUsing SunControl in an ESP8266 Solar Powered System (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2017\/07\/SunControl_070517-V1.2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can download the current Full SunControl Product Specification here.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_INA3221\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino SunControl INA3221 Current Measuring Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_INA3221\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Python SunControl INA3221 Current Measuring Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ESP8266_Solar\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 SunControl INA3221 Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/flowthings\/sdlIna3221\" target=\"_blank\" rel=\"noopener noreferrer\"\u003enode + mraa library for reading from SwitchDoc Labs SunControl or INA3221 Breakout Board\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat are Grove Connectors?\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out this Grove Connector tutorial.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eRasPiConnect \/ ArduinoConnect Control Panel\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca title=\"Build your Own Control Panels: Tutorial for RasPiConnect\" href=\"http:\/\/www.switchdoc.com\/2014\/07\/build-control-panels-tutorial-raspiconnect\/\"\u003eRasPiConnect\/ArduinoConnect\u003c\/a\u003e control panel for SunAirPlus \/ SunControl is shown below.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_047a58ee2f12fa46f5b1739e4e8dcf31_large.png?11466624317595473790\"\u003e\u003cimg class=\"alignleft wp-image-1671 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_047a58ee2f12fa46f5b1739e4e8dcf31_large.png?11466624317595473790\" alt=\"047a58ee2f12fa46f5b1739e4e8dcf31_large\" width=\"700\" height=\"525\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e","published_at":"2017-10-19T21:25:03-07:00","created_at":"2017-10-19T21:25:05-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Grove,Solar,Raspberry Pi,Arduino,ESP8266,I2C,USB","tags":[],"price":2000,"price_min":2000,"price_max":2000,"available":false,"price_varies":false,"compare_at_price":4999,"compare_at_price_min":4999,"compare_at_price_max":4999,"compare_at_price_varies":false,"variants":[{"id":3341070991390,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0045-SUNCTL-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header","public_title":null,"options":["Default Title"],"price":2000,"weight":14,"compare_at_price":4999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"702535869007","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/fbc7b5748cfbbbcfd8944a6b02a3fd90.jpg?v=1508473505","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1a59568f0d52fc0602c22c6bd2bdd9a7.jpg?v=1508473505","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/78f553729e1e54a477b0cef4793ca349.jpg?v=1508473505","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6a33b1ae29ab5d489beab1393f7286f8.jpg?v=1508473505","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/029e92346aadc71cd94cd1f93aeed74e.jpg?v=1508473505","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d333691fc46cd99f87dfccbfba3a7d95.jpg?v=1508473505","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/f25dc4247805dcbfc792a32d5bb9f05c.png?v=1508473505","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/250a9642dd884767804ad7bdf07dabfe.jpg?v=1508473505","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ff9ced96df359bbef61719f0d9130fb0.jpg?v=1508473505"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/fbc7b5748cfbbbcfd8944a6b02a3fd90.jpg?v=1508473505","options":["Title"],"media":[{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828962799660,"position":1,"preview_image":{"aspect_ratio":1.357,"height":943,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/fbc7b5748cfbbbcfd8944a6b02a3fd90.jpg?v=1508473505"},"aspect_ratio":1.357,"height":943,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/fbc7b5748cfbbbcfd8944a6b02a3fd90.jpg?v=1508473505","width":1280},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828962832428,"position":2,"preview_image":{"aspect_ratio":1.235,"height":799,"width":987,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1a59568f0d52fc0602c22c6bd2bdd9a7.jpg?v=1508473505"},"aspect_ratio":1.235,"height":799,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1a59568f0d52fc0602c22c6bd2bdd9a7.jpg?v=1508473505","width":987},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828962897964,"position":3,"preview_image":{"aspect_ratio":1.232,"height":799,"width":984,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/78f553729e1e54a477b0cef4793ca349.jpg?v=1508473505"},"aspect_ratio":1.232,"height":799,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/78f553729e1e54a477b0cef4793ca349.jpg?v=1508473505","width":984},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828962963500,"position":4,"preview_image":{"aspect_ratio":1.357,"height":943,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6a33b1ae29ab5d489beab1393f7286f8.jpg?v=1508473505"},"aspect_ratio":1.357,"height":943,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6a33b1ae29ab5d489beab1393f7286f8.jpg?v=1508473505","width":1280},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828963029036,"position":5,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/029e92346aadc71cd94cd1f93aeed74e.jpg?v=1508473505"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/029e92346aadc71cd94cd1f93aeed74e.jpg?v=1508473505","width":1280},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828963061804,"position":6,"preview_image":{"aspect_ratio":1.531,"height":836,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d333691fc46cd99f87dfccbfba3a7d95.jpg?v=1508473505"},"aspect_ratio":1.531,"height":836,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d333691fc46cd99f87dfccbfba3a7d95.jpg?v=1508473505","width":1280},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828963127340,"position":7,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/f25dc4247805dcbfc792a32d5bb9f05c.png?v=1508473505"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/f25dc4247805dcbfc792a32d5bb9f05c.png?v=1508473505","width":800},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828963160108,"position":8,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/250a9642dd884767804ad7bdf07dabfe.jpg?v=1508473505"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/250a9642dd884767804ad7bdf07dabfe.jpg?v=1508473505","width":1280},{"alt":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header ","id":828963192876,"position":9,"preview_image":{"aspect_ratio":1.041,"height":1095,"width":1140,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ff9ced96df359bbef61719f0d9130fb0.jpg?v=1508473505"},"aspect_ratio":1.041,"height":1095,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ff9ced96df359bbef61719f0d9130fb0.jpg?v=1508473505","width":1140}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 id=\"h:suncontrol-diy-solar\"\u003eSunControl - DIY Solar Power for Arduino and Raspberry Pi Projects\u003c\/h1\u003e\n\u003cp\u003eEver wanted to build your own Solar Powered Raspberry Pi or Arduino project? You\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003cstrong\u003eCAN\u003c\/strong\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003ebuild your own solar powered projects. We have combined three popular boards for solar systems into one inexpensive package. \u003c\/p\u003e\n\u003cp\u003eWe combined the USB PowerControl, SunAirPlus and the SwitchDoc Labs Watchdog Timer into one board. We removed a couple of features that most users weren't using (and can be done by inexpensive other boards), specifically the space for the servo chip and the second A\/D converter. We found that most customers were using timing to do sun tracking rather than optical tracking. Makes sense!\u003c\/p\u003e\n\u003cp\u003eSunControl is customizable with your software and hardware. Note that the battery and solar panel plugs on SunControl are of type JST-PH 2 pin.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWhen using the SunControl board, you need to look at the VOC (Voltage Open Circuit) of any other solar panel you have. If it is above 6V, you need to add in a 10W 5.6V Zener diode across the solar panels to protect your SunControl board and system. Connect the \"+\" end of the diode to the \"+\" side of the solar panel (or the line from the solar panel to the SunControl Board) and the \"-\" side to the negative (\"-\") side of the panel. This will get hot, so let it hang free in the air.\u003c\/p\u003e\n\u003cp\u003eUnfortunately, you can’t just put 10 1W 5.6V Zener diodes in parallel. They aren’t identical and the one that is slightly lower will take all the current. You can, however, stack them in series to acquire the appropriate voltage and power dissipation. Such as stacking 2 5W 2.8V Zener diodes.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/10w-5-6v-zener-diode\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can find such a Zener diode here.\u003c\/a\u003e \u003c\/p\u003e\n\u003ch1 id=\"h:suncontrol-allows-yo\"\u003eSunControl Allows you to:\u003c\/h1\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/6a33b1ae29ab5d489beab1393f7286f8_large.jpg?v=1508473505\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse Solar Power to Charge and Run Your small Computers\u003c\/li\u003e\n\u003cli\u003eMeasure and Monitor the Performance of your system.\u003c\/li\u003e\n\u003cli\u003eUnderstand what is happening in real time with your Solar Panels, batteries and computers!\u003c\/li\u003e\n\u003cli\u003eTurn your Raspberry Pi \/ Arduino on and off to avoid brownouts and SD Card damage\u003c\/li\u003e\n\u003cli\u003eUse the onboard Hardware WatchDog timer to dramatically improve your reliability of the your project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eNow Available - Protect your LiPo battery from cold and hot charging by adding a NTC Thermistor to SunControl\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/ntc-thermistor-10k-ohm-1-b3950-l75mm-wired-10k-ohm-metal-film-resistor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNTC Thermistor 10K ohm 1% B3950 L75mm Wired + 10K Ohm Metal Film Resistor (0450-NTCTHERM-DSBT)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2017\/08\/suncontrol-solar-controller-lipo-temperature-charging-control\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out this Article on the temperature control.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_SunControlThermistorTestAnno.png?5193565564105136973\" alt=\"\" width=\"509\" height=\"386\"\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:grove-connectors-mak\"\u003eGrove Connectors make it easy to hook up!\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"Apple-converted-space\"\u003e- Combines Three Boards (SunAirPlus, USB PowerControl and WatchDog Timer)\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"Apple-converted-space\"\u003e- \u003c\/span\u003eEasy to Use! No Soldering\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:solar-power-your-sys\"\u003e\u003cstrong\u003e\u003cem\u003e- Solar Power\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/em\u003eYour System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:charge-your-batterie\"\u003e\u003cstrong\u003e\u003cem\u003e- Charge\u003c\/em\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003eyour Batteries\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:control-your-compute\"\u003e\u003cstrong\u003e\u003cem\u003e- Control\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/em\u003eYour Computer Power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:gather-important-dat\"\u003e\u003cstrong\u003e\u003cem\u003e- Gather\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/em\u003eImportant Data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:improve-your-reliabi\"\u003e\u003cstrong\u003e\u003cem\u003e- Improve\u003c\/em\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003eYour Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp id=\"h:qi-wireless-charging\"\u003e\u003cstrong\u003e-\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003cem\u003eQi Wireless\u003c\/em\u003e Charging Too!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe major features of the SunControl board are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses 6V Solar Cells\u003c\/li\u003e\n\u003cli\u003eUse 3.7V LiPo Cells for batteries\u003c\/li\u003e\n\u003cli\u003eBuilt-In USB Port Power Control using Computer GPIO Control or Battery Sensing\u003c\/li\u003e\n\u003cli\u003eHas LiPo to 5V voltage boost built in\u003c\/li\u003e\n\u003cli\u003eDirectly powers Raspberry Pi \/ Arduino\u003c\/li\u003e\n\u003cli\u003eWorks Raspberry Pi (3.3V) GPIO and Arduino (5.0V) GPIO\u003c\/li\u003e\n\u003cli\u003eBuilt-in data gathering chips for system currents \/voltages\u003c\/li\u003e\n\u003cli\u003eCharges iPhones and other phones or devices\u003c\/li\u003e\n\u003cli\u003eApproximates an MPPT (Maximum Power Point Tracking) charging system\u003c\/li\u003e\n\u003cli\u003eComes with Grove connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eA Few Technical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1500 mA from Solar Panels (Max, self regulating)\u003c\/li\u003e\n\u003cli\u003e1000mA max instantaneous charge to LiPo Battery\u003c\/li\u003e\n\u003cli\u003e1000mA supply to 5V USB Connector\u003c\/li\u003e\n\u003cli\u003eUSB Hysterisis: Battery 3.7V turn on, 3.3 turn off (this prevents what is called called hammering - power turns on, computer uses power, battery voltage drops and power turns off. Battery recovers, turns on power, computer uses power, battery voltage goes down, shutting off power - rinse and repeat)\u003c\/li\u003e\n\u003cli\u003e3 Channel INA3221 based I2C Current Measurement - 12 bit, 3000 samples\/second 0.8 mA resolution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEven Qi Wireless Charging Works with SunControl\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003eWe hooked up a Qi Wireless charger to SunControl and got great results right off the bat. Think of the applications for robots!\u003c\/p\u003e\n\u003ch2\u003eApplication Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsing the SunControl WatchDog Timer (coming soon)\u003c\/li\u003e\n\u003cli\u003eUsing SunControl in a Raspberry Pi Solar Powered System (coming soon)\u003c\/li\u003e\n\u003cli\u003eUsing SunControl in an Arduino Solar Powered System (coming soon)\u003c\/li\u003e\n\u003cli\u003eUsing SunControl in an ESP8266 Solar Powered System (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2017\/07\/SunControl_070517-V1.2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can download the current Full SunControl Product Specification here.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_INA3221\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino SunControl INA3221 Current Measuring Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_INA3221\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Python SunControl INA3221 Current Measuring Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ESP8266_Solar\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 SunControl INA3221 Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/flowthings\/sdlIna3221\" target=\"_blank\" rel=\"noopener noreferrer\"\u003enode + mraa library for reading from SwitchDoc Labs SunControl or INA3221 Breakout Board\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat are Grove Connectors?\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out this Grove Connector tutorial.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eRasPiConnect \/ ArduinoConnect Control Panel\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca title=\"Build your Own Control Panels: Tutorial for RasPiConnect\" href=\"http:\/\/www.switchdoc.com\/2014\/07\/build-control-panels-tutorial-raspiconnect\/\"\u003eRasPiConnect\/ArduinoConnect\u003c\/a\u003e control panel for SunAirPlus \/ SunControl is shown below.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_047a58ee2f12fa46f5b1739e4e8dcf31_large.png?11466624317595473790\"\u003e\u003cimg class=\"alignleft wp-image-1671 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_047a58ee2f12fa46f5b1739e4e8dcf31_large.png?11466624317595473790\" alt=\"047a58ee2f12fa46f5b1739e4e8dcf31_large\" width=\"700\" height=\"525\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e"});window.BOLD.common.Shopify.saveVariant(3341070991390, { variant: {"id":3341070991390,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0045-SUNCTL-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"SunControl - Advanced Solar Controller \/ Charger \/ Sun Tracker \/ Data Gathering Grove\/Header","public_title":null,"options":["Default Title"],"price":2000,"weight":14,"compare_at_price":4999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"702535869007","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229362958366, product_handle: "suncontrol-advanced-solar-controller-charger-sun-tracker-data-gathering-grove-header", price: 2000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("software-defined-radio-sdr-and-antenna", 6027243421863, {"id":6027243421863,"title":"WeatherSense Software Defined Radio (SDR) and Antenna","handle":"software-defined-radio-sdr-and-antenna","description":"\u003cp\u003e \u003cspan data-mce-fragment=\"1\"\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWe are suggesting this SDR for use with the Raspberry Pi WeatherSense (WeatherRack2) kits is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/085bb5dab37758dd2b5821e2417205c3_original_480x480.png?v=1604974285\"\u003e\u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs has written drivers for the WeatherSense weather sensors and supplies the drivers to the community open source. These are all provided in\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\" target=\"_blank\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\"\u003eour pre-built SD Card image\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor the SDR drivers, please visit the WeatherRack2 Product Page:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/wireless-weatherrack2%20\"\u003ehttps:\/\/shop.switchdoc.com\/products\/wireless-weatherrack2 \u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-11-09T18:19:02-08:00","created_at":"2020-11-09T18:10:05-08:00","vendor":"SwitchDoc Labs","type":"Shop All,Grove,Break Out Boards,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":2395,"price_min":2395,"price_max":2395,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37284269752487,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0030-SSDRANT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"WeatherSense Software Defined Radio (SDR) and Antenna","public_title":null,"options":["Default Title"],"price":2395,"weight":91,"compare_at_price":null,"inventory_quantity":106,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_47872.jpg?v=1604974550","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/PiWirelessWB.jpg?v=1604974555","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/085bb5dab37758dd2b5821e2417205c3_original.png?v=1604974555","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SDR.jpg?v=1604974555","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_48132copy.jpg?v=1604974555"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_47872.jpg?v=1604974550","options":["Title"],"media":[{"alt":null,"id":13670757367975,"position":1,"preview_image":{"aspect_ratio":1.414,"height":2032,"width":2874,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_47872.jpg?v=1604974550"},"aspect_ratio":1.414,"height":2032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_47872.jpg?v=1604974550","width":2874},{"alt":null,"id":13670765592743,"position":2,"preview_image":{"aspect_ratio":1.414,"height":1191,"width":1684,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/PiWirelessWB.jpg?v=1604974555"},"aspect_ratio":1.414,"height":1191,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/PiWirelessWB.jpg?v=1604974555","width":1684},{"alt":null,"id":13670703005863,"position":3,"preview_image":{"aspect_ratio":3.009,"height":226,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/085bb5dab37758dd2b5821e2417205c3_original.png?v=1604974555"},"aspect_ratio":3.009,"height":226,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/085bb5dab37758dd2b5821e2417205c3_original.png?v=1604974555","width":680},{"alt":null,"id":13670750322855,"position":4,"preview_image":{"aspect_ratio":0.895,"height":1900,"width":1700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SDR.jpg?v=1604974555"},"aspect_ratio":0.895,"height":1900,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SDR.jpg?v=1604974555","width":1700},{"alt":null,"id":13670759465127,"position":5,"preview_image":{"aspect_ratio":0.997,"height":2879,"width":2870,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_48132copy.jpg?v=1604974555"},"aspect_ratio":0.997,"height":2879,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_48132copy.jpg?v=1604974555","width":2870}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cspan data-mce-fragment=\"1\"\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWe are suggesting this SDR for use with the Raspberry Pi WeatherSense (WeatherRack2) kits is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/085bb5dab37758dd2b5821e2417205c3_original_480x480.png?v=1604974285\"\u003e\u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs has written drivers for the WeatherSense weather sensors and supplies the drivers to the community open source. These are all provided in\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\" target=\"_blank\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\"\u003eour pre-built SD Card image\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor the SDR drivers, please visit the WeatherRack2 Product Page:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/wireless-weatherrack2%20\"\u003ehttps:\/\/shop.switchdoc.com\/products\/wireless-weatherrack2 \u003c\/a\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(37284269752487, { variant: {"id":37284269752487,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0030-SSDRANT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"WeatherSense Software Defined Radio (SDR) and Antenna","public_title":null,"options":["Default Title"],"price":2395,"weight":91,"compare_at_price":null,"inventory_quantity":106,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 106, product_id: 6027243421863, product_handle: "software-defined-radio-sdr-and-antenna", price: 2395, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-computer-controlled-usb-submersible-water-pump", 229355782174, {"id":229355782174,"title":"Grove Computer Controlled USB Submersible Water Pump","handle":"grove-computer-controlled-usb-submersible-water-pump","description":"\u003ch1\u003eGrove Computer Controlled USB Submersible Water Pump\u003c\/h1\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a Raspberry Pi or an Arduino. The product includes a USB PowerControl board which controls the USB power input to turn the Water Pump on or off by a control signal a GPIO on the computer. This product can be used with or without Grove connectors as you can connect jumper wires to the pins inside the Grove connector. Using this product requires NO soldering.\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering (such as SmartPlantPi), aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis product contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB PowerControlNE\u003c\/li\u003e\n\u003cli\u003eUSB Powered Submersible Pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eThe software to use the USB Controlled Submersible Pump is simple. Two GPIO lines are connected (either through a Grove connector or jumpers) and you can control the devices per this table. In most computer controlled applications, LIPOBATIN is left unconnected. See the specification. SwitchDoc Labs is providing a simple set of drivers for the Arduino and Raspberry Pi. See example code in SmartPlantPi, a Raspberry Pi Watering System.\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/04\/USBPowerControl-011217-V2.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUSB PowerControl Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eArduino Drivers (coming soon)\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Software Drivers (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUSB PowerControl\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe USB PowerControl board is a USB to USB solid state relay. It is is a digitally controlled power switch for your Arduino or Raspberry Pi. It is a Pi On and Off switch.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003eAnything you can plug into a USB port can be controlled with USB PowerControl. It's easy to hook up. You connect a control line to the Grove connector (two GPIO lines) or the output of a LiPo battery to the LIPOBATIN line and if the line is LOW (\u0026lt; ~3.3V) the USB Port is off. If it is HIGH (above 3.8V) the USB Port is turned on and you have 5V of power to the USB plug.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eWe have now added a Grove Digital Input that allows you to control the USB PowerControlV2 using two GPIO Lines (one enable and one control line) to switch on and off from a Grove Digital Port. The Grove Enable Line, when high, disables the LIPOBATIN line and makes control of the device under the Grove Control Line. When the Grove Enable Line is low, the LIPOBATIN line controls the relay as in the original USB PowerControl. The Grove Enable Line is pulled up by a 43K resistor so if it is disconnected, the USB PowerControlV2 is compatible with the original USB PowerControl.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 5\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 5\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003ch2\u003eGrove GPIO Control Circuitry for NE\u003c\/h2\u003e\n\u003cp\u003eThis circuitry is provided to allow the USB PowerControlV2 to be controlled by either LIPOBATIN or the state of the CONTROL Line (J3 Pin 1). ENABLE (J3 Pin 2) controls whether the USB POWERCONTROLV2 is switched by LIPOBATIN or the CONTROL line. Remember that LIPOBATIN is not a digital input. It is designed to look at the voltage level of the battery.\u003c\/p\u003e\n\u003cp\u003eThe truth table for the USB PowerControlNE V2 is given below:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"screen-shot-2017-02-27-at-8.09.30-am.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_screen-shot-2017-02-27-at-8.09.30-am.png?72564315701330679\" alt=\"screen-shot-2017-02-27-at-8.09.30-am.png\" width=\"684\" height=\"296\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003eTurn your raspberryPi\/arduino on and off using this solid state relay. Use a GPIO line, use a WatchDog timer, or use a different voltage level to trigger the relay.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003eThis board was initially designed to sit in-between a Solar Power Controller (such as SunAir\/SunAirPlus) and a Raspberry Pi \/ Arduino. The input to the board was designed to come directly from a LiPo battery so the computer won't be turned on until the LiPo battery was charged up above 3.8V. We provide a hysteresis circuit so the board won't turn on and then turn immediately off because the power supply is yanked down when the computer turns on (putting a load not the battery). This really happens!!!! \u003cstrong\u003eYou kill Raspberry Pi SD Cards this way.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\nThe software for this device is simple. You use one GPIO line to turn it on or off (or connect it directly to your LiPo battery for automatic control!). It controls the 5V line that powers a USB device plugged into the female USB A power end of the board.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCan Switch the Power to any plugged into the Female A USB port\u003c\/li\u003e\n\u003cli\u003eOn\/Off Controlled by a single control line Implements Hysteresis on Control line\u003c\/li\u003e\n\u003cli\u003e3.8V\/3.3V Turn On\/Off Voltage on Control Line 3.3V Turn Off Voltage on Control Line\u003c\/li\u003e\n\u003cli\u003eGrove Digital Connector - ENABLE and CONTROL your USB Port\u003c\/li\u003e\n\u003cli\u003eOver Current Protection\u003c\/li\u003e\n\u003cli\u003eThermal Shutdown\u003c\/li\u003e\n\u003cli\u003eReverse Current Blocking\u003c\/li\u003e\n\u003cli\u003eCan be connected to GPIO Pin or directly to LiPo Battery\u003c\/li\u003e\n\u003cli\u003eSupports both Arduino and Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eHas Dual USB ports - no more cutting USB cables\u003c\/li\u003e\n\u003cli\u003eWill work with SunAir and SunAirPlus Solar Power Controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUSB Submersible Pump\u003c\/h2\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e","published_at":"2017-10-19T21:23:17-07:00","created_at":"2017-10-19T21:23:18-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,Raspberry Pi,Arduino,ESP8266,USB","tags":["Garden"],"price":1995,"price_min":1995,"price_max":1995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340928188446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0303-USBPCPUMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Computer Controlled USB Submersible Water Pump","public_title":null,"options":["Default Title"],"price":1995,"weight":102,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6.jpg?v=1508473398","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0ca7a4d7f541820bc73104084272634f.jpg?v=1508473398","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43.jpg?v=1508473398","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d632ad25e3c1cdc7eb330a183129eaaa.jpg?v=1508473398"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6.jpg?v=1508473398","options":["Title"],"media":[{"alt":"Grove Computer Controlled USB Submersible Water Pump","id":828951003180,"position":1,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6.jpg?v=1508473398"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6.jpg?v=1508473398","width":1280},{"alt":"Grove Computer Controlled USB Submersible Water Pump","id":828951035948,"position":2,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0ca7a4d7f541820bc73104084272634f.jpg?v=1508473398"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0ca7a4d7f541820bc73104084272634f.jpg?v=1508473398","width":1280},{"alt":"Grove Computer Controlled USB Submersible Water Pump","id":828951101484,"position":3,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43.jpg?v=1508473398"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43.jpg?v=1508473398","width":1280},{"alt":"Grove Computer Controlled USB Submersible Water Pump","id":828951167020,"position":4,"preview_image":{"aspect_ratio":2.278,"height":562,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d632ad25e3c1cdc7eb330a183129eaaa.jpg?v=1508473398"},"aspect_ratio":2.278,"height":562,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d632ad25e3c1cdc7eb330a183129eaaa.jpg?v=1508473398","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGrove Computer Controlled USB Submersible Water Pump\u003c\/h1\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a Raspberry Pi or an Arduino. The product includes a USB PowerControl board which controls the USB power input to turn the Water Pump on or off by a control signal a GPIO on the computer. This product can be used with or without Grove connectors as you can connect jumper wires to the pins inside the Grove connector. Using this product requires NO soldering.\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering (such as SmartPlantPi), aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis product contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB PowerControlNE\u003c\/li\u003e\n\u003cli\u003eUSB Powered Submersible Pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eThe software to use the USB Controlled Submersible Pump is simple. Two GPIO lines are connected (either through a Grove connector or jumpers) and you can control the devices per this table. In most computer controlled applications, LIPOBATIN is left unconnected. See the specification. SwitchDoc Labs is providing a simple set of drivers for the Arduino and Raspberry Pi. See example code in SmartPlantPi, a Raspberry Pi Watering System.\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/04\/USBPowerControl-011217-V2.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUSB PowerControl Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eArduino Drivers (coming soon)\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Software Drivers (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUSB PowerControl\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe USB PowerControl board is a USB to USB solid state relay. It is is a digitally controlled power switch for your Arduino or Raspberry Pi. It is a Pi On and Off switch.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003eAnything you can plug into a USB port can be controlled with USB PowerControl. It's easy to hook up. You connect a control line to the Grove connector (two GPIO lines) or the output of a LiPo battery to the LIPOBATIN line and if the line is LOW (\u0026lt; ~3.3V) the USB Port is off. If it is HIGH (above 3.8V) the USB Port is turned on and you have 5V of power to the USB plug.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eWe have now added a Grove Digital Input that allows you to control the USB PowerControlV2 using two GPIO Lines (one enable and one control line) to switch on and off from a Grove Digital Port. The Grove Enable Line, when high, disables the LIPOBATIN line and makes control of the device under the Grove Control Line. When the Grove Enable Line is low, the LIPOBATIN line controls the relay as in the original USB PowerControl. The Grove Enable Line is pulled up by a 43K resistor so if it is disconnected, the USB PowerControlV2 is compatible with the original USB PowerControl.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 5\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 5\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003ch2\u003eGrove GPIO Control Circuitry for NE\u003c\/h2\u003e\n\u003cp\u003eThis circuitry is provided to allow the USB PowerControlV2 to be controlled by either LIPOBATIN or the state of the CONTROL Line (J3 Pin 1). ENABLE (J3 Pin 2) controls whether the USB POWERCONTROLV2 is switched by LIPOBATIN or the CONTROL line. Remember that LIPOBATIN is not a digital input. It is designed to look at the voltage level of the battery.\u003c\/p\u003e\n\u003cp\u003eThe truth table for the USB PowerControlNE V2 is given below:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"screen-shot-2017-02-27-at-8.09.30-am.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_screen-shot-2017-02-27-at-8.09.30-am.png?72564315701330679\" alt=\"screen-shot-2017-02-27-at-8.09.30-am.png\" width=\"684\" height=\"296\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003eTurn your raspberryPi\/arduino on and off using this solid state relay. Use a GPIO line, use a WatchDog timer, or use a different voltage level to trigger the relay.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003eThis board was initially designed to sit in-between a Solar Power Controller (such as SunAir\/SunAirPlus) and a Raspberry Pi \/ Arduino. The input to the board was designed to come directly from a LiPo battery so the computer won't be turned on until the LiPo battery was charged up above 3.8V. We provide a hysteresis circuit so the board won't turn on and then turn immediately off because the power supply is yanked down when the computer turns on (putting a load not the battery). This really happens!!!! \u003cstrong\u003eYou kill Raspberry Pi SD Cards this way.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\nThe software for this device is simple. You use one GPIO line to turn it on or off (or connect it directly to your LiPo battery for automatic control!). It controls the 5V line that powers a USB device plugged into the female USB A power end of the board.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCan Switch the Power to any plugged into the Female A USB port\u003c\/li\u003e\n\u003cli\u003eOn\/Off Controlled by a single control line Implements Hysteresis on Control line\u003c\/li\u003e\n\u003cli\u003e3.8V\/3.3V Turn On\/Off Voltage on Control Line 3.3V Turn Off Voltage on Control Line\u003c\/li\u003e\n\u003cli\u003eGrove Digital Connector - ENABLE and CONTROL your USB Port\u003c\/li\u003e\n\u003cli\u003eOver Current Protection\u003c\/li\u003e\n\u003cli\u003eThermal Shutdown\u003c\/li\u003e\n\u003cli\u003eReverse Current Blocking\u003c\/li\u003e\n\u003cli\u003eCan be connected to GPIO Pin or directly to LiPo Battery\u003c\/li\u003e\n\u003cli\u003eSupports both Arduino and Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eHas Dual USB ports - no more cutting USB cables\u003c\/li\u003e\n\u003cli\u003eWill work with SunAir and SunAirPlus Solar Power Controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUSB Submersible Pump\u003c\/h2\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(3340928188446, { variant: {"id":3340928188446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0303-USBPCPUMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Computer Controlled USB Submersible Water Pump","public_title":null,"options":["Default Title"],"price":1995,"weight":102,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229355782174, product_handle: "grove-computer-controlled-usb-submersible-water-pump", price: 1995, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("usb-usb-current-voltage-sensor-i2c-ina219", 4175060074540, {"id":4175060074540,"title":"USB \/ USB Current Voltage Sensor I2C INA219 for Raspberry Pi \/ Arduino","handle":"usb-usb-current-voltage-sensor-i2c-ina219","description":"\u003cp\u003eNeed to measure current and voltage through a USB cord programmatically? Gather lots of data dynamically? Then you need a USB CVSensor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eThe USB CVSensor is an USB to USB current and voltage measuring device. It uses an INA219 to accurately (and dynamically) measured currents and voltages through a USB plug.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eMeasure:\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eStartup Currents and Voltages\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eTrack Dynamic power consumption in systems\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eGather data using Arduino or Raspberry Pi base systems.\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eUse in Solar Power Systems\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/Pi3B_InrushBPS-2_large.png?v=1569936776\" alt=\"\"\u003e\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eUSB CVSensor Specification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Type A Plugs\u003c\/li\u003e\n\u003cli\u003eData+, Data-, Ground directly passed through\u003c\/li\u003e\n\u003cli\u003eINA219 Highside DC Current and Voltage Sensor\u003c\/li\u003e\n\u003cli\u003eUp to 2000 conversions per second\u003c\/li\u003e\n\u003cli\u003e0.1 ohm 1% 2W current sense resistor\u003c\/li\u003e\n\u003cli\u003eUp to ±3.2A current measurement, with ±0.8mA resolution\u003c\/li\u003e\n\u003cli\u003eStandard Grove I2C Connector to INA219\u003c\/li\u003e\n\u003cli\u003eDefault I2C Address 0x45\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUSB CVSensor I2C Addresses\u003c\/h2\u003e\n\u003cp\u003eDefault: 0x45\u003c\/p\u003e\n\u003cp\u003eSJ2 Cut \/SJ1 Cut: 0x40\u003c\/p\u003e\n\u003cp\u003eSJ2 Not Cut \/ SJ1 Cut: 0x44\u003c\/p\u003e\n\u003cp\u003eSJ2 Cut \/ SJ1 Not Cut: 0x41\u003c\/p\u003e\n\u003cp\u003eSJ2 Not Cut \/ SJ1 Not Cut: 0x45\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/1_copy_large.jpg?v=1569936736\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eUSB CVSensor Downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/09\/ina219.pdf\" target=\"_blank\"\u003eIN219 Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pypi.org\/project\/pi-ina219\/\" target=\"_blank\"\u003eRaspberry Pi INA219 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_INA219\" target=\"_blank\"\u003eArduino INA219 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003eAnything you can plug into a USB port can be measured (Voltage and Current) with the USB CVSensor. It's easy to hook up.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003eExample Application\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-10-01T05:56:02-07:00","created_at":"2019-10-01T05:56:02-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Grove,Sensors,Break Out Boards,Raspberry Pi,Arduino,ESP8266","tags":[],"price":995,"price_min":995,"price_max":995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30289637900332,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0047-USBCVSNSR-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"USB \/ USB Current Voltage Sensor I2C INA219 for Raspberry Pi \/ Arduino","public_title":null,"options":["Default Title"],"price":995,"weight":1,"compare_at_price":null,"inventory_quantity":310,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234729096","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1.jpg?v=1569936699","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1_copy.jpg?v=1569936736","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Pi3B_InrushBPS-2.png?v=1569936776"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1.jpg?v=1569936699","options":["Title"],"media":[{"alt":null,"id":2353759748140,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1.jpg?v=1569936699"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1.jpg?v=1569936699","width":4032},{"alt":null,"id":2353760010284,"position":2,"preview_image":{"aspect_ratio":0.992,"height":1606,"width":1593,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1_copy.jpg?v=1569936736"},"aspect_ratio":0.992,"height":1606,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1_copy.jpg?v=1569936736","width":1593},{"alt":null,"id":2353760436268,"position":3,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Pi3B_InrushBPS-2.png?v=1569936776"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Pi3B_InrushBPS-2.png?v=1569936776","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eNeed to measure current and voltage through a USB cord programmatically? Gather lots of data dynamically? Then you need a USB CVSensor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eThe USB CVSensor is an USB to USB current and voltage measuring device. It uses an INA219 to accurately (and dynamically) measured currents and voltages through a USB plug.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eMeasure:\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eStartup Currents and Voltages\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eTrack Dynamic power consumption in systems\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eGather data using Arduino or Raspberry Pi base systems.\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cb\u003eUse in Solar Power Systems\u003c\/b\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/Pi3B_InrushBPS-2_large.png?v=1569936776\" alt=\"\"\u003e\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eUSB CVSensor Specification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Type A Plugs\u003c\/li\u003e\n\u003cli\u003eData+, Data-, Ground directly passed through\u003c\/li\u003e\n\u003cli\u003eINA219 Highside DC Current and Voltage Sensor\u003c\/li\u003e\n\u003cli\u003eUp to 2000 conversions per second\u003c\/li\u003e\n\u003cli\u003e0.1 ohm 1% 2W current sense resistor\u003c\/li\u003e\n\u003cli\u003eUp to ±3.2A current measurement, with ±0.8mA resolution\u003c\/li\u003e\n\u003cli\u003eStandard Grove I2C Connector to INA219\u003c\/li\u003e\n\u003cli\u003eDefault I2C Address 0x45\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUSB CVSensor I2C Addresses\u003c\/h2\u003e\n\u003cp\u003eDefault: 0x45\u003c\/p\u003e\n\u003cp\u003eSJ2 Cut \/SJ1 Cut: 0x40\u003c\/p\u003e\n\u003cp\u003eSJ2 Not Cut \/ SJ1 Cut: 0x44\u003c\/p\u003e\n\u003cp\u003eSJ2 Cut \/ SJ1 Not Cut: 0x41\u003c\/p\u003e\n\u003cp\u003eSJ2 Not Cut \/ SJ1 Not Cut: 0x45\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/1_copy_large.jpg?v=1569936736\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eUSB CVSensor Downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/09\/ina219.pdf\" target=\"_blank\"\u003eIN219 Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pypi.org\/project\/pi-ina219\/\" target=\"_blank\"\u003eRaspberry Pi INA219 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_INA219\" target=\"_blank\"\u003eArduino INA219 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003eAnything you can plug into a USB port can be measured (Voltage and Current) with the USB CVSensor. It's easy to hook up.\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003eExample Application\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"});window.BOLD.common.Shopify.saveVariant(30289637900332, { variant: {"id":30289637900332,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0047-USBCVSNSR-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"USB \/ USB Current Voltage Sensor I2C INA219 for Raspberry Pi \/ Arduino","public_title":null,"options":["Default Title"],"price":995,"weight":1,"compare_at_price":null,"inventory_quantity":310,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234729096","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 310, product_id: 4175060074540, product_handle: "usb-usb-current-voltage-sensor-i2c-ina219", price: 995, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("copy-of-usb-submersible-water-pump", 5337119293607, {"id":5337119293607,"title":"4 PACK - USB Submersible Water Pumps","handle":"copy-of-usb-submersible-water-pump","description":"\u003ch1\u003e 4-PACK USB Submersible Water Pumps\u003c\/h1\u003e\n\u003cp\u003eThis is a \u003cstrong\u003efour pack bundle\u003c\/strong\u003e of USB Submersible water Pumps\u003c\/p\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a USB Port\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering , aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e","published_at":"2020-06-15T14:12:12-07:00","created_at":"2020-06-15T14:12:12-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,Raspberry Pi,Arduino,ESP8266,USB","tags":["Garden"],"price":3795,"price_min":3795,"price_max":3795,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34733553877159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0243-4PACKUSBPMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"4 PACK - USB Submersible Water Pumps","public_title":null,"options":["Default Title"],"price":3795,"weight":283,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_3523ee13-dedf-43d6-add8-7b3dd46200af.jpg?v=1592255534"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534","options":["Title"],"media":[{"alt":null,"id":9600332562599,"position":1,"preview_image":{"aspect_ratio":0.867,"height":916,"width":794,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534"},"aspect_ratio":0.867,"height":916,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c1580296-a373-452a-a66a-6f75d20930c9.jpg?v=1592255534","width":794},{"alt":"Grove Computer Controlled USB Submersible Water Pump","id":9600332595367,"position":2,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_3523ee13-dedf-43d6-add8-7b3dd46200af.jpg?v=1592255534"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_3523ee13-dedf-43d6-add8-7b3dd46200af.jpg?v=1592255534","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e 4-PACK USB Submersible Water Pumps\u003c\/h1\u003e\n\u003cp\u003eThis is a \u003cstrong\u003efour pack bundle\u003c\/strong\u003e of USB Submersible water Pumps\u003c\/p\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a USB Port\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering , aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(34733553877159, { variant: {"id":34733553877159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0243-4PACKUSBPMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"4 PACK - USB Submersible Water Pumps","public_title":null,"options":["Default Title"],"price":3795,"weight":283,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 5337119293607, product_handle: "copy-of-usb-submersible-water-pump", price: 3795, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("usb-submersible-water-pump", 5337088688295, {"id":5337088688295,"title":"USB Submersible Water Pump","handle":"usb-submersible-water-pump","description":"\u003ch1\u003e USB Submersible Water Pump\u003c\/h1\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a USB Port\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering , aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e","published_at":"2020-06-15T14:03:03-07:00","created_at":"2020-06-15T14:03:03-07:00","vendor":"vendor-unknown","type":"Shop All,Grove,Raspberry Pi,Arduino,ESP8266,USB","tags":["Garden"],"price":1195,"price_min":1195,"price_max":1195,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34733407207591,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0223-USBPMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"USB Submersible Water Pump","public_title":null,"options":["Default Title"],"price":1195,"weight":102,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c6b6d42d-99f7-43c3-8270-dca5b55ca7d0.jpg?v=1592255349","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_e7eb9195-7e95-41b9-bfed-3d986b0ba06e.jpg?v=1592255349"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c6b6d42d-99f7-43c3-8270-dca5b55ca7d0.jpg?v=1592255349","options":["Title"],"media":[{"alt":null,"id":9600285868199,"position":1,"preview_image":{"aspect_ratio":0.867,"height":916,"width":794,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c6b6d42d-99f7-43c3-8270-dca5b55ca7d0.jpg?v=1592255349"},"aspect_ratio":0.867,"height":916,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/02c49cc5ec876965388298e3fc06a3f6_c6b6d42d-99f7-43c3-8270-dca5b55ca7d0.jpg?v=1592255349","width":794},{"alt":"Grove Computer Controlled USB Submersible Water Pump","id":9600215187623,"position":2,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_e7eb9195-7e95-41b9-bfed-3d986b0ba06e.jpg?v=1592255349"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b10c108d81d4f6745858f4cf41f25c43_e7eb9195-7e95-41b9-bfed-3d986b0ba06e.jpg?v=1592255349","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e USB Submersible Water Pump\u003c\/h1\u003e\n\u003cp\u003eThis is a Submersible Water Pump designed to be controlled by a USB Port\u003c\/p\u003e\n\u003cp\u003eIt can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering , aquariums, various chemical processing projects.\u003c\/p\u003e\n\u003cp\u003eThis is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 1W\u003c\/li\u003e\n\u003cli\u003eFixed Form: Sitting\u003c\/li\u003e\n\u003cli\u003ePower Source: Charge\u003c\/li\u003e\n\u003cli\u003eVoltage: DC 5V\u003c\/li\u003e\n\u003cli\u003ePower: 0.6-1.8W\u003c\/li\u003e\n\u003cli\u003eQmax: 120L \/ H (44GPH)\u003c\/li\u003e\n\u003cli\u003eHmax.: 15.7 - 60 inch \/ 0.4 - 1.5 meter\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: Approx. 8mm\u003c\/li\u003e\n\u003cli\u003eDimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm\u003c\/li\u003e\n\u003cli\u003eUSB Cable Length: Approx. 145cm\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic\u003c\/li\u003e\n\u003cli\u003eBlack color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(34733407207591, { variant: {"id":34733407207591,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0223-USBPMP-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"USB Submersible Water Pump","public_title":null,"options":["Default Title"],"price":1195,"weight":102,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 5337088688295, product_handle: "usb-submersible-water-pump", price: 1195, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.metafields = window.BOLD.common.Shopify.metafields || {};window.BOLD.common.Shopify.metafields["bold_rp"] = {};window.BOLD.common.Shopify.metafields["bold_csp_defaults"] = {};

4 PACK - USB Submersible Water Pumps

4 PACK - USB Submersible Water Pumps

Regular price: Sold out
Sale price: $37.95
Unit price: per

4-PACK USB Submersible Water Pumps

This is a four pack bundle of USB Submersible water Pumps

This is a Submersible Water Pump designed to be controlled by a USB Port

It can be used for for any project you want to pump water under computer control. Some applications are: Plant Watering , aquariums, various chemical processing projects.

This is a submersible water pump usable in fresh water or saltwater. Suitable for aquariums, fountains, fish ponds, etc. It has good seal performance l, high efficiency, high delivery head, large flow, and is quiet and durable.

Features

Power: 1W
Fixed Form: Sitting
Power Source: Charge
Voltage: DC 5V
Power: 0.6-1.8W
Qmax: 120L / H (44GPH)
Hmax.: 15.7 - 60 inch / 0.4 - 1.5 meter
Outlet Diameter: Approx. 8mm
Dimension (L x W x H): Approx. 3.8 x 3.4 x 2.8cm
USB Cable Length: Approx. 145cm
Material: Plastic
Black color