window.BOLD.common.Shopify.saveProduct("the-thunder-board-i2c-lightning-simulator", 434672173094, {"id":434672173094,"title":"Thunder Board Lightning Simulator","handle":"the-thunder-board-i2c-lightning-simulator","description":"\u003ch1\u003eThunder Board Lightning Simulator\u003c\/h1\u003e\n\u003cp\u003eDebugging Lightning Detectors has always been a problem.  You have to wait for a lightning storm.   To fix this problem, we have now developed a Lighting Simulator product.  \u003c\/p\u003e\n\u003cp\u003eThis board is a companion to the SwitchDoc Labs Thunder Board Lighting Detector.   This fully assembled and programmed product will generate simulated lighting on cue to test your lightning detection setup.\u003c\/p\u003e\n\u003cp\u003eWe use it regularly in house and are pleased to release this as a product.\u003c\/p\u003e\n\u003cp\u003eWe have just posted the software for the Thunder Board Lightning Simulator.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes with a fully\u003cstrong\u003e assembled and programmed\u003c\/strong\u003e shield plugged into an Arduino Uno R3. Works out of the box.  USB to USB - Type A Cable for programming and power.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_2213_large.JPG?v=1512856198\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eHere is what it does:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFar Lightning Strike (push Far Stk Button)\u003c\/li\u003e\n\u003cli\u003eMid-range Lightning Strike (push Mid Stk Button)\u003c\/li\u003e\n\u003cli\u003eClose Lightning Strike (push Close Stk Button)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eand three other lightning test modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlow Timed Lightning Strike Mode - Every 5 minutes (push Far Stk and Mid Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eFast Timed Lightning Strike Mode - Every 15 seconds (push Mid Stk and Close Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eRandom Timed Lightning Strike Mode - From 30 seconds to 30 minutes (push all three buttons together)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou terminate the Time Strike modes by pushing any single button or by performing a power off or reset.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote:   This lighting simulator is not very strong and might have to be held close to the Thunder Board Lightning Detector especially in the presence of cell phones, computers and monitors.   If you look at the Thunder Board Lightning Detector, you can see when the Lightning board picks up lightning when the Interrupt White LED blinks or lights up.\u003c\/p\u003e\n\u003cp\u003eIf you are having detection problems, move your whole test setup away from RFI (Radio Frequency Interference) sources.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eNew Tutorial on Thunder Board\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-19T21:21:49-07:00","created_at":"2017-12-09T13:14:16-08:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Break Out Boards,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":7495,"price_min":7495,"price_max":7495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":5856476823590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0241-THNDRTST-DBST","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Thunder Board Lightning Simulator","public_title":null,"options":["Default Title"],"price":7495,"weight":68,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728433","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2213.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2398.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/548f17b413ab2f23b60384f0d61f43fc_original.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/818b9f04766632a87ea6f0755faeeec1_original.jpg?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_e1b221d5-1f0e-4bd8-838e-c915cc4450aa.jpg?v=1512856198","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_429ef232-ef28-4d75-a067-6ab974530c49.png?v=1512856198"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198","options":["Title"],"media":[{"alt":null,"id":883384713260,"position":1,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198","width":3024},{"alt":null,"id":883384647724,"position":2,"preview_image":{"aspect_ratio":1.412,"height":2082,"width":2939,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2213.JPG?v=1512856198"},"aspect_ratio":1.412,"height":2082,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2213.JPG?v=1512856198","width":2939},{"alt":null,"id":883384680492,"position":3,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2398.JPG?v=1512856198"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2398.JPG?v=1512856198","width":3024},{"alt":null,"id":883385204780,"position":4,"preview_image":{"aspect_ratio":1.0,"height":680,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/548f17b413ab2f23b60384f0d61f43fc_original.JPG?v=1512856198"},"aspect_ratio":1.0,"height":680,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/548f17b413ab2f23b60384f0d61f43fc_original.JPG?v=1512856198","width":680},{"alt":null,"id":883385237548,"position":5,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/818b9f04766632a87ea6f0755faeeec1_original.jpg?v=1512856198"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/818b9f04766632a87ea6f0755faeeec1_original.jpg?v=1512856198","width":500},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":883381698604,"position":6,"preview_image":{"aspect_ratio":0.925,"height":1156,"width":1069,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_e1b221d5-1f0e-4bd8-838e-c915cc4450aa.jpg?v=1512856198"},"aspect_ratio":0.925,"height":1156,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_e1b221d5-1f0e-4bd8-838e-c915cc4450aa.jpg?v=1512856198","width":1069},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":883381731372,"position":7,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_429ef232-ef28-4d75-a067-6ab974530c49.png?v=1512856198"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_429ef232-ef28-4d75-a067-6ab974530c49.png?v=1512856198","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eThunder Board Lightning Simulator\u003c\/h1\u003e\n\u003cp\u003eDebugging Lightning Detectors has always been a problem.  You have to wait for a lightning storm.   To fix this problem, we have now developed a Lighting Simulator product.  \u003c\/p\u003e\n\u003cp\u003eThis board is a companion to the SwitchDoc Labs Thunder Board Lighting Detector.   This fully assembled and programmed product will generate simulated lighting on cue to test your lightning detection setup.\u003c\/p\u003e\n\u003cp\u003eWe use it regularly in house and are pleased to release this as a product.\u003c\/p\u003e\n\u003cp\u003eWe have just posted the software for the Thunder Board Lightning Simulator.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes with a fully\u003cstrong\u003e assembled and programmed\u003c\/strong\u003e shield plugged into an Arduino Uno R3. Works out of the box.  USB to USB - Type A Cable for programming and power.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_2213_large.JPG?v=1512856198\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eHere is what it does:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFar Lightning Strike (push Far Stk Button)\u003c\/li\u003e\n\u003cli\u003eMid-range Lightning Strike (push Mid Stk Button)\u003c\/li\u003e\n\u003cli\u003eClose Lightning Strike (push Close Stk Button)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eand three other lightning test modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlow Timed Lightning Strike Mode - Every 5 minutes (push Far Stk and Mid Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eFast Timed Lightning Strike Mode - Every 15 seconds (push Mid Stk and Close Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eRandom Timed Lightning Strike Mode - From 30 seconds to 30 minutes (push all three buttons together)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou terminate the Time Strike modes by pushing any single button or by performing a power off or reset.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote:   This lighting simulator is not very strong and might have to be held close to the Thunder Board Lightning Detector especially in the presence of cell phones, computers and monitors.   If you look at the Thunder Board Lightning Detector, you can see when the Lightning board picks up lightning when the Interrupt White LED blinks or lights up.\u003c\/p\u003e\n\u003cp\u003eIf you are having detection problems, move your whole test setup away from RFI (Radio Frequency Interference) sources.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eNew Tutorial on Thunder Board\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(5856476823590, { variant: {"id":5856476823590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0241-THNDRTST-DBST","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Thunder Board Lightning Simulator","public_title":null,"options":["Default Title"],"price":7495,"weight":68,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728433","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 15, product_id: 434672173094, product_handle: "the-thunder-board-i2c-lightning-simulator", price: 7495, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.apps_installed = {"Product Upsell":3} || {};window.BOLD.common.Shopify.saveProduct("grove-hdc1080-i2c-temperature-and-humidity-board-hdc1000-compatible", 229355159582, {"id":229355159582,"title":"Grove HDC1080 I2C Temperature and Humidity Board (HDC1000 compatible)","handle":"grove-hdc1080-i2c-temperature-and-humidity-board-hdc1000-compatible","description":"\u003ch1 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eGrove HDC1080 I2C Temperature and Humidity Board (HDC1000 \/ HDC1010 compatible)\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe HDC1080 is a HDC1000 compatible temperature and humidity sensor. It is located at I2C address 0x40.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eGrove - Temperature and Humidity Sensor (HDC1080) utilizes a HDC1080 sensor, from Texas Instruments. It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The HDC1080 is functional within the full –40°C to +125°C temperature range, and 0-100% RH range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003e\u003cspan style=\"font-size: 1.5em;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eGrove connector compatible\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eI2C Interface\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eLow Power\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eWide operating voltage range\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSupply Voltage: 3~5Vdc;\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eWorking Current: 0.12~90uA;\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eRelative humidity accuracy: ±3%RH；\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eRelative humidity operating range: 0~100%RH;\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eTemperature accuracy: ±0.2℃；\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eTemperature range: -40~125℃；\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eOperating temperature: -20~85℃\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eDimension: 40×20mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003eDownloads (Note: HDC1080 is software compatible with the HDC1000\/HDC1010)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_HDC1000\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Python Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/closedcube\/ClosedCube_HDC1080_Arduino\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Software \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2017\/01\/hdc1080.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHDC1080 Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eSoftware Example\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eResults\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cpre\u003eTest SDL_Pi_HDC1000 Version 1.0 - SwitchDoc Labs\n\nSample uses 0x40 and SwitchDoc HDC1000 Breakout board \nProgram Started at:2017-01-19 15:57:30\n\n-----------------\nTemperature = 23.4 C\nHumidity = 26.3 %\nconfigure register = 0x10\nturning Heater On\nconfigure register = 0x30\nturning Heater Off\nconfigure register = 0x10\nchange temperature resolution\nconfigure register = 0x14\nchange temperature resolution\nconfigure register = 0x10\nchange humidity resolution\nconfigure register = 0x12\nchange humidity resolution\nconfigure register = 0x10\n-----------------\nTemperature = 23.4 C\nHumidity = 26.3 %\nconfigure register = 0x10\nturning Heater On\nconfigure register = 0x30\nturning Heater Off\nconfigure register = 0x10\nchange temperature resolution\nconfigure register = 0x14\nchange temperature resolution\nconfigure register = 0x10\nchange humidity resolution\nconfigure register = 0x12\nchange humidity resolution\nconfigure register = 0x10\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003etestHDC1000.py\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cpre\u003e#!\/usr\/bin\/env python\n#\n# Test SDL_Pi_HDC1000\n#\n# January 2017\n#\n\n#imports\n\nimport sys\nimport time\nimport datetime\nimport SDL_Pi_HDC1000\n\n\n\n# Main Program\n\nprint \"\"\nprint \"Test SDL_Pi_HDC1000 Version 1.0 - SwitchDoc Labs\"\nprint \"\"\nprint \"Sample uses 0x40 and SwitchDoc HDC1000 Breakout board \"\nprint \"Program Started at:\"+ time.strftime(\"%Y-%m-%d %H:%M:%S\")\nprint \"\"\n\nhdc1000 = SDL_Pi_HDC1000.SDL_Pi_HDC1000()\n\nwhile True:\n\n print \"-----------------\"\n print \"Temperature = %3.1f C\" % hdc1000.readTemperature()\n print \"Humidity = %3.1f %%\" % hdc1000.readHumidity()\n\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # turn heater on\n print \"turning Heater On\"\n hdc1000.turnHeaterOn()\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # turn heater off\n print \"turning Heater Off\"\n hdc1000.turnHeaterOff()\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n\n # change temperature resolution\n print \"change temperature resolution\"\n hdc1000.setTemperatureResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_TEMPERATURE_RESOLUTION_11BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # change temperature resolution\n print \"change temperature resolution\"\n hdc1000.setTemperatureResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_TEMPERATURE_RESOLUTION_14BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n\n # change humdity resolution\n print \"change humidity resolution\"\n hdc1000.setHumidityResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_HUMIDITY_RESOLUTION_8BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # change humdity resolution\n print \"change humidity resolution\"\n hdc1000.setHumidityResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_HUMIDITY_RESOLUTION_14BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n\n time.sleep(3.0)\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"p3\"\u003e\u003c\/h2\u003e","published_at":"2017-10-19T21:23:09-07:00","created_at":"2017-10-19T21:23:10-07:00","vendor":"vendor-unknown","type":"Shop All,Weather,Grove,Sensors,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":950,"price_min":950,"price_max":950,"available":true,"price_varies":false,"compare_at_price":950,"compare_at_price_min":950,"compare_at_price_max":950,"compare_at_price_varies":false,"variants":[{"id":3340919177246,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0024-GHDC1000-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grove HDC1080 I2C Temperature and Humidity Board (HDC1000 compatible)","public_title":null,"options":["Default Title"],"price":950,"weight":14,"compare_at_price":950,"inventory_quantity":128,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9b4f24ecaee9b522a9debef78a851a36.jpg?v=1508473390","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5284fbbeeeb52f2bc5e434e32106fdec.jpg?v=1508473390","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/bf22a94dafdbbe40a5bc2510e732ea19.jpg?v=1508473390"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9b4f24ecaee9b522a9debef78a851a36.jpg?v=1508473390","options":["Title"],"media":[{"alt":"Grove HDC1080 I2C Temperature and Humidity Board (HDC1000 compatible)","id":828949332012,"position":1,"preview_image":{"aspect_ratio":1.26,"height":1016,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9b4f24ecaee9b522a9debef78a851a36.jpg?v=1508473390"},"aspect_ratio":1.26,"height":1016,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9b4f24ecaee9b522a9debef78a851a36.jpg?v=1508473390","width":1280},{"alt":"Grove HDC1080 I2C Temperature and Humidity Board (HDC1000 compatible)","id":828949397548,"position":2,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5284fbbeeeb52f2bc5e434e32106fdec.jpg?v=1508473390"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5284fbbeeeb52f2bc5e434e32106fdec.jpg?v=1508473390","width":1280},{"alt":"Grove HDC1080 I2C Temperature and Humidity Board (HDC1000 compatible)","id":828949463084,"position":3,"preview_image":{"aspect_ratio":1.077,"height":1188,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/bf22a94dafdbbe40a5bc2510e732ea19.jpg?v=1508473390"},"aspect_ratio":1.077,"height":1188,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/bf22a94dafdbbe40a5bc2510e732ea19.jpg?v=1508473390","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eGrove HDC1080 I2C Temperature and Humidity Board (HDC1000 \/ HDC1010 compatible)\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe HDC1080 is a HDC1000 compatible temperature and humidity sensor. It is located at I2C address 0x40.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eGrove - Temperature and Humidity Sensor (HDC1080) utilizes a HDC1080 sensor, from Texas Instruments. It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The HDC1080 is functional within the full –40°C to +125°C temperature range, and 0-100% RH range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003e\u003cspan style=\"font-size: 1.5em;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eGrove connector compatible\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eI2C Interface\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eLow Power\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eWide operating voltage range\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eSupply Voltage: 3~5Vdc;\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eWorking Current: 0.12~90uA;\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eRelative humidity accuracy: ±3%RH；\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eRelative humidity operating range: 0~100%RH;\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eTemperature accuracy: ±0.2℃；\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eTemperature range: -40~125℃；\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eOperating temperature: -20~85℃\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"s4\"\u003e• \u003c\/span\u003e\u003cspan class=\"s5\"\u003eŸ\u003c\/span\u003e\u003cspan class=\"s1\"\u003eDimension: 40×20mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003eDownloads (Note: HDC1080 is software compatible with the HDC1000\/HDC1010)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_HDC1000\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Python Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/closedcube\/ClosedCube_HDC1080_Arduino\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Software \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2017\/01\/hdc1080.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHDC1080 Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"p3\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eSoftware Example\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eResults\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cpre\u003eTest SDL_Pi_HDC1000 Version 1.0 - SwitchDoc Labs\n\nSample uses 0x40 and SwitchDoc HDC1000 Breakout board \nProgram Started at:2017-01-19 15:57:30\n\n-----------------\nTemperature = 23.4 C\nHumidity = 26.3 %\nconfigure register = 0x10\nturning Heater On\nconfigure register = 0x30\nturning Heater Off\nconfigure register = 0x10\nchange temperature resolution\nconfigure register = 0x14\nchange temperature resolution\nconfigure register = 0x10\nchange humidity resolution\nconfigure register = 0x12\nchange humidity resolution\nconfigure register = 0x10\n-----------------\nTemperature = 23.4 C\nHumidity = 26.3 %\nconfigure register = 0x10\nturning Heater On\nconfigure register = 0x30\nturning Heater Off\nconfigure register = 0x10\nchange temperature resolution\nconfigure register = 0x14\nchange temperature resolution\nconfigure register = 0x10\nchange humidity resolution\nconfigure register = 0x12\nchange humidity resolution\nconfigure register = 0x10\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003etestHDC1000.py\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cpre\u003e#!\/usr\/bin\/env python\n#\n# Test SDL_Pi_HDC1000\n#\n# January 2017\n#\n\n#imports\n\nimport sys\nimport time\nimport datetime\nimport SDL_Pi_HDC1000\n\n\n\n# Main Program\n\nprint \"\"\nprint \"Test SDL_Pi_HDC1000 Version 1.0 - SwitchDoc Labs\"\nprint \"\"\nprint \"Sample uses 0x40 and SwitchDoc HDC1000 Breakout board \"\nprint \"Program Started at:\"+ time.strftime(\"%Y-%m-%d %H:%M:%S\")\nprint \"\"\n\nhdc1000 = SDL_Pi_HDC1000.SDL_Pi_HDC1000()\n\nwhile True:\n\n print \"-----------------\"\n print \"Temperature = %3.1f C\" % hdc1000.readTemperature()\n print \"Humidity = %3.1f %%\" % hdc1000.readHumidity()\n\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # turn heater on\n print \"turning Heater On\"\n hdc1000.turnHeaterOn()\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # turn heater off\n print \"turning Heater Off\"\n hdc1000.turnHeaterOff()\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n\n # change temperature resolution\n print \"change temperature resolution\"\n hdc1000.setTemperatureResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_TEMPERATURE_RESOLUTION_11BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # change temperature resolution\n print \"change temperature resolution\"\n hdc1000.setTemperatureResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_TEMPERATURE_RESOLUTION_14BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n\n # change humdity resolution\n print \"change humidity resolution\"\n hdc1000.setHumidityResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_HUMIDITY_RESOLUTION_8BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n # change humdity resolution\n print \"change humidity resolution\"\n hdc1000.setHumidityResolution(SDL_Pi_HDC1000.HDC1000_CONFIG_HUMIDITY_RESOLUTION_14BIT)\n # read configuration register\n print \"configure register = 0x%X\" % hdc1000.readConfigRegister()\n\n time.sleep(3.0)\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"p3\"\u003e\u003c\/h2\u003e"});window.BOLD.common.Shopify.saveVariant(3340919177246, { variant: {"id":3340919177246,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0024-GHDC1000-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grove HDC1080 I2C Temperature and Humidity Board (HDC1000 compatible)","public_title":null,"options":["Default Title"],"price":950,"weight":14,"compare_at_price":950,"inventory_quantity":128,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 128, product_id: 229355159582, product_handle: "grove-hdc1080-i2c-temperature-and-humidity-board-hdc1000-compatible", price: 950, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("the-weather-board-w-grove-interface-board-for-weather-instruments-for-raspberry-pi-arduino", 229341429790, {"id":229341429790,"title":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","handle":"the-weather-board-w-grove-interface-board-for-weather-instruments-for-raspberry-pi-arduino","description":"\u003ch1\u003eWeather Board For The Raspberry Pi \/ Arduino - Grove\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2014\/10\/WeatherPiArduinoLogoShaded.png\"\u003e\u003cimg class=\"alignright wp-image-1359 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_WeatherPiArduinoLogoShaded-300x225.png?12345361184555249909\" alt=\"WeatherPiArduinoLogoShaded\" width=\"300\" height=\"225\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: This is a replacement board for the WeatherPiArduino Board. The WeatherPiArduino Version 1 product page is \u003ca href=\"http:\/\/www.switchdoc.com\/weatherpiarduino-bare-board\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e and the WeatherPiArduino Version 2 product page is \u003ca href=\"http:\/\/www.switchdoc.com\/weatherpiarduino-version-2\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e(This board is also known as the WeatherPiArduino V3)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWant to build a Weather Station with the board?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eLook at these two sources (more on the way):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s2\"\u003eWeatherBoard Specification - \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\"\u003e\u003cspan class=\"s3\"\u003ehttp:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s2\"\u003eNew GroveWeatherPi Tutorial - \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/08\/tutorial-part-1-building-a-solar-powered-raspberry-pi-weather-station-groveweatherpi\/\"\u003e\u003cspan class=\"s3\"\u003ehttp:\/\/www.switchdoc.com\/2016\/08\/tutorial-part-1-building-a-solar-powered-raspberry-pi-weather-station-groveweatherpi\/\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Weather Board for the Raspberry Pi \/ Arduino is now available and in stock! \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack Weather Sensors now available.\u003c\/a\u003e \u003ca href=\"http:\/\/www.switchdoc.com\/am2315-encased-i2c-temperature-and-humidity-sensor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOutdoor Temperature and Humidity Sensors now available.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"size-medium wp-image-12782\" style=\"float: left;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_0010-WXBOARD-DSBT.main_-300x253.jpg?49184033114260863\" alt=\"Weather Board\" width=\"300\" height=\"253\"\u003e\u003c\/p\u003e\n\u003cp\u003eWeather Board\u003c\/p\u003e\n\u003cp\u003e] \u003cstrong\u003eThe Weather Board\u003c\/strong\u003e is a weather station controller board designed to interface to Arduino and Raspberry Pi computers. It is an interface board developed by SwitchDoc Labs to allow the user to easily build a fully functioned Weather Station while allowing customization of functions. \u003cstrong\u003eThe Weather Board\u003c\/strong\u003e is derived from \u003ca title=\"Project Curacao Introduction – Part 1\" href=\"http:\/\/www.switchdoc.com\/project-curacao-introduction-part-1\/\"\u003eProject Curacao\u003c\/a\u003e and the WeatherPiArduino. Generation 1 of this board was deployed and tested in Curacao before Generation 2 was released to production. The full WeatherPiArduino article was published in\u003ca href=\"http:\/\/www.raspberry-pi-geek.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e Raspberry Pi Geek magazine\u003c\/a\u003e in September, 2014 and a follow up article has been published in April, 2015 (including the new lightning detector).  Combine the Weather Board with a \u003ca title=\"SunControl Solar Power Controller for Raspberry Pi and Arduino\" href=\"https:\/\/shop.switchdoc.com\/products\/suncontrol-advanced-solar-controller-charger-sun-tracker-data-gathering-grove-header\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSunControl \u003c\/a\u003eor \u003ca href=\"http:\/\/www.switchdoc.com\/sunairplus-solar-power-controllerdata-collector\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSunAirPlus\u003c\/a\u003e board to create a solar powered weather station.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eDownloads for the Weather Board\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eNew! The new Weather Board software auto detects your weather devices and can be configured for the ThunderBoard Lightning Detector and SunAirPlus \/ SunControl for Solar Power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherBoard\"\u003eArduino Software is here\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Weather_80422\"\u003eArduino Software for the WeatherRack and the Weather Board is here.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherBoard\"\u003eRaspberry Pi Software is here.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\"\u003eYou can download the Full Weather Board Specification here . The specification contains wiring lists for connecting the Weather Board to the Raspberry Pi and the Arduino family of products\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003eWhat are Grove Connectors?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eGrove connectors are standardized plugs for connecting devices together easily and without soldering. \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee our Full Grove Tutorial here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-11552 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_WBAnno-1024x768.jpg?1681402048385319245\" alt=\"WBAnno\" width=\"930\" height=\"698\"\u003e\u003c\/p\u003e\n\u003ch1\u003eStartup of Raspberry Pi Test Software\u003c\/h1\u003e\n\u003cpre\u003epi@RPIZero:~\/SDL_Pi_WeatherBoard $ vi WeatherBoard.py\n\nAM2315 = 28.1000003815\n\nWeather Board Demo \/ Test Version 1.6 - SwitchDoc Labs\n\n\nProgram Started at:2016-07-24 22:29:47\n\n----------------------\nDS3231: \t\tPresent\nBMP280: \t\tPresent\nFRAM: \t\tNot Present\nHTU21DF: \t\tPresent\nAM2315: \t\tPresent\nADS1015: \t\tNot Present\nADS1115: \t\tPresent\nAS3935: \t\tPresent\nOLED: \t\tPresent\nSunAirPlus: \t\tPresent\n----------------------\nswitch to Bus0\n---------------------------------------- \n----------------- \n DS3231 Real Time Clock\n----------------- \nRaspberry Pi=\t2016-07-24 22:29:47\nDS3231=\t\t2016-07-24 22:29:47\nDS3231 Temperature= \t29.25 C\n----------------- \n----------------- \n WeatherRack Weather Sensors\n----------------- \nRain Total=\t0.00 in\nWind Speed=\t0.00 MPH\nMPH wind_gust=\t0.00 MPH\nWind Direction=\t\t\t 270.00 Degrees\nWind Direction Voltage=\t\t 4.472 V\n----------------- \n----------------- \n BMP280 Barometer\n----------------- \nTemperature = \t29.48 C\nPressure = \t94.49 KPa\nAltitude = \t584.90 m\nSealevel Pressure = \t94.49 KPa\n----------------- \n----------------- \n AM2315 Temperature\/Humidity Sensor\n----------------- \nAM2315 temperature: 28.2\nAM2315 humidity: 31.2\nAM2315 crc: 1\n----------------- \n----------------- \n HTU21DF Temp\/Hum\n----------------- \nTemperature = \t28.40 C\nHumidity = \t36.70 %\n----------------- \n----------------- \n AS3935 Lightning Detector\n----------------- \nLast result from AS3935:\n----No Lightning detected---\nLightning Count = 0\n----------------- \n----------------- \n FRAM Not Present\n----------------- \n----------------- \n\n----------------- \n SunAirPlus Present\n----------------- \nLIPO_Battery Bus Voltage: 4.18 V \nLIPO_Battery Shunt Voltage: 0.64 mV \nLIPO_Battery Load Voltage: 4.18 V\nLIPO_Battery Current 1: 6.40 mA\n\nSolar Cell Bus Voltage 2: 3.08 V \nSolar Cell Shunt Voltage 2: 0.00 mV \nSolar Cell Load Voltage 2: 3.08 V\nSolar Cell Current 2: -0.00 mA\n\nOutput Bus Voltage 3: 4.98 V \nOutput Shunt Voltage 3: 22.44 mV \nOutput Load Voltage 3: 5.01 V\nOutput Current 3: 224.40 mA\n\nSleeping 10 seconds\n\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"size-medium wp-image-12784\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_4220-300x225.jpg?1852090372190818917\" alt=\"Weather Board\" width=\"300\" height=\"225\"\u003e Solar Powered Weather Board[\/caption] You can download the Full \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeather Board Specification here\u003c\/a\u003e . The specification contains wiring lists for connecting the Weather Board to the Raspberry Pi and the Arduino family of products.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-12783 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_2861-2-300x204.jpg?4793822695298194265\" alt=\"Weather Board\" width=\"300\" height=\"204\"\u003e Weather Board and Weather Rack[\/caption]\u003c\/p\u003e\n\u003ch2\u003eBlock Diagram\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-12781 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_0010-WXBOARD-DSBT.aimage3-1024x724.jpg?12490634241034148081\" alt=\"0010-WXBOARD-DSBT.aimage3\" width=\"930\" height=\"658\"\u003e It was specifically designed to interface with the SwitchDoc WeatherRack, ArgentData Weather Sensors, SparkFun Weather Meters SEN-08942 along with auxiliary I2C units.\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eInterfaces on Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eI2C for Raspberry Pi and Arduino (Board works at 3.3V and 5V)\u003c\/li\u003e\n\u003cli\u003eRJ11 Plugs installed for SwitchDoc Labs WeatherRack, etc.\u003c\/li\u003e\n\u003cli\u003eWind Vane, Rain Bucket, Anemometer computer connections for Raspberry Pi and Arduino\u003c\/li\u003e\n\u003cli\u003eGrove Connections for all interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eI2C devices Included with the Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/BST-BMP280-DS001-11.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBMP280 Barometer and Temperature Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlug in I2C Interfaces provided\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eDS3231 RTC With EEPROM\u003c\/li\u003e\n\u003cli\u003eSwitchDoc Labs Thunder Board Lightning Detector board\u003c\/li\u003e\n\u003cli\u003eAdafruit HTU21D-F Temperature\/Humidity breakout board\u003c\/li\u003e\n\u003cli\u003eAdafruit 32KB FRAM I2C breakout board\u003c\/li\u003e\n\u003cli\u003eAdafruit ADS1015 4 Channel A\/D I2C board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eI2C Device Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/BST-BMP280-DS001-11.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBMP280 (Barometer \/ Temperature)\u003c\/a\u003e \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/DS3231.pdf\"\u003eDS3231 (Real Time Clock)\u003c\/a\u003e \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/doc0336.pdf\"\u003eAT24C32 (EEPROM)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/ads1015.pdf\"\u003eADS1015 (12 bit ADC)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/AS3935_Datasheet_EN_v2.pdf\"\u003eAS3935 (Thunder Board - Lightning Detector)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/1899_HTU21D.pdf\"\u003eHTU21D-F (Humidity)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/1895_datasheet.pdf\"\u003eFRAM (32KB Fast Non-Volatile Storage)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2014\/08\/IMG_0481.jpg\"\u003e\u003cimg class=\"wp-image-697 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_0481-225x300.jpg?14293708085406744205\" alt=\"SparkFun\" width=\"225\" height=\"300\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack\u003c\/a\u003e Sensors\u003c\/p\u003e\n\u003cp\u003eThe SDL_Weather_80422 class library is designed to provide all the functions of the \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSwitchDoc WeatherRack\u003c\/a\u003e, ArgentData Weather Sensors, SparkFun Weather Meters SEN-08942 in one C++ class. The library is easy to use and hides the complexity of the interface to the sensors. The C++ class has two Interrupt Service Routines (ISR), one each for the anemometer and the rain bucket. The wind vane is connected to an Analog to Digital Converter (ADC) input pin on the Arduino. Note that the C++ class is designed to be a singleton, in other words, you only can interface one sensor package without some additional work (mostly involving Interrupts). The article in \u003ca href=\"http:\/\/www.raspberry-pi-geek.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Geek magazine\u003c\/a\u003e discusses this in detail. There are two main modes for the class.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_SAMPLE\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_SAMPLE mode means return immediately after asking for the wind speed. The wind speed is averaged at sampleTime or since you last asked, whichever is longer. If the sample time has not passed since the last call, the class returns the last calculated wind speed. That means that you will never see changes faster than the specified sample time. This allows you to not wait for the wind speed, you can just grab the last valid reading.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_DELAY\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_DELAY mode means to wait for the set sample time to expire and return the average wind speed at the expiration. You would use this if you want to make sure you have the latest value and your program architecture allows you to pause for the sample time before continuing. Which mode you use depends on the specific software architecture of your Arduino application. Typically, I use SDL_MODE_SAMPLE because I can tolerate not having a current value of wind speed. The example code for the SDL_Weather_80422 library is shown below:\u003c\/p\u003e\n\u003cpre\u003e\/*\nSDL_Weather_80422_Library.ino - Example for using SDL_Weather_80422 Library\nFor SwitchDoc Labs WeatherRack \nWeather Sensor Assembly 80422 Argent Data Systems\nSparkFun\nCreated by SwitchDoc Labs July 27, 2014.\nReleased into the public domain.\n*\/\n#include \n#include\n\n#include \"SDL_Weather_80422.h\"\n\n#define pinLED 13 \/\/ LED connected to digital pin 13\n#define pinAnem 18 \/\/ Anenometer connected to pin 18 - Int 5\n#define pinRain 2 \n#define intAnem 5\n#define intRain 0\n\n\/\/ for mega, have to use Port B - only Port B works.\n\/*\nArduino Pins PORT\n------------ ----\nDigital 0-7 D\nDigital 8-13 B\nAnalog 0-5 C\n*\/\n\n\n\/\/ initialize SDL_Weather_80422 library\nSDL_Weather_80422 weatherStation(pinAnem, pinRain, intAnem, intRain, A0, SDL_MODE_INTERNAL_AD);\n\n\nuint8_t i;\n\n\nfloat currentWindSpeed;\nfloat currentWindGust;\nfloat totalRain;\nvoid setup()\n{ \nSerial.begin(57600); \n\nSerial.println(\"-----------\");\nSerial.println(\"WeatherPiArduino SDL_Weather_80422 Class Test\");\nSerial.println(\"Version 1.0\");\nSerial.println(\"-----------\");\n\n\nweatherStation.setWindMode(SDL_MODE_SAMPLE, 5.0);\n\/\/weatherStation.setWindMode(SDL_MODE_DELAY, 5.0);\ntotalRain = 0.0;\n}\n\n\nvoid loop()\n{\nSerial.println(\"----------------\");\n\ncurrentWindSpeed = weatherStation.current_wind_speed()\/1.6;\ncurrentWindGust = weatherStation.get_wind_gust()\/1.6;\ntotalRain = totalRain + weatherStation.get_current_rain_total()\/25.4;\nSerial.print(\"rain_total=\");\nSerial.print(totalRain);\nSerial.print(\"\"\" wind_speed=\");\nSerial.print(currentWindSpeed);\nSerial.print(\"MPH wind_gust=\");\nSerial.print(currentWindGust);\nSerial.print(\"MPH wind_direction=\");\nSerial.println(weatherStation.current_wind_direction());\n\n\ndelay(1000);\n\n\n}\n\u003c\/pre\u003e\n\u003cp\u003eWhen you run this, you should get a result similar to this:\u003c\/p\u003e\n\u003cpre\u003e-----------\n\nWeatherArduino SDL_Weather_80422 Class Test\nVersion 1.0\n\n-----------\n----------------\nrain_total=0.00 wind_speed=13.20MPH wind_gust=12.40MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=9.60MPH wind_gust=9.48MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=10.20MPH wind_gust=9.23MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=11.10MPH wind_gust=9.84MPH wind_direction=90.00\n\u003c\/pre\u003e","published_at":"2017-10-19T21:20:18-07:00","created_at":"2017-10-19T21:20:19-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":2499,"price_min":2499,"price_max":2499,"available":false,"price_varies":false,"compare_at_price":2999,"compare_at_price_min":2999,"compare_at_price_max":2999,"compare_at_price_varies":false,"variants":[{"id":3340711297054,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0010-WXBOARD-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","public_title":null,"options":["Default Title"],"price":2499,"weight":14,"compare_at_price":2999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"710465466203","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9bd6face18ce95e64741788c686c4a9b.jpg?v=1508473219","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3a84b826899359114d728af614e3b7dc.jpg?v=1508473219","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51c61482a65386cfb4cca8129776afef.jpg?v=1508473219","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e8686eba03f7eedd177b749d10e22d08_235b9be6-b0e1-4550-b167-6cfbb5cedb21.jpg?v=1508473219","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2d789af7242127fd16f4f93363183faf.jpg?v=1508473219"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9bd6face18ce95e64741788c686c4a9b.jpg?v=1508473219","options":["Title"],"media":[{"alt":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","id":828926591020,"position":1,"preview_image":{"aspect_ratio":1.187,"height":1078,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9bd6face18ce95e64741788c686c4a9b.jpg?v=1508473219"},"aspect_ratio":1.187,"height":1078,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9bd6face18ce95e64741788c686c4a9b.jpg?v=1508473219","width":1280},{"alt":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","id":828926656556,"position":2,"preview_image":{"aspect_ratio":1.333,"height":342,"width":456,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3a84b826899359114d728af614e3b7dc.jpg?v=1508473219"},"aspect_ratio":1.333,"height":342,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3a84b826899359114d728af614e3b7dc.jpg?v=1508473219","width":456},{"alt":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","id":828926689324,"position":3,"preview_image":{"aspect_ratio":1.414,"height":905,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51c61482a65386cfb4cca8129776afef.jpg?v=1508473219"},"aspect_ratio":1.414,"height":905,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51c61482a65386cfb4cca8129776afef.jpg?v=1508473219","width":1280},{"alt":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","id":828926722092,"position":4,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e8686eba03f7eedd177b749d10e22d08_235b9be6-b0e1-4550-b167-6cfbb5cedb21.jpg?v=1508473219"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e8686eba03f7eedd177b749d10e22d08_235b9be6-b0e1-4550-b167-6cfbb5cedb21.jpg?v=1508473219","width":1280},{"alt":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","id":828926754860,"position":5,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2d789af7242127fd16f4f93363183faf.jpg?v=1508473219"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2d789af7242127fd16f4f93363183faf.jpg?v=1508473219","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eWeather Board For The Raspberry Pi \/ Arduino - Grove\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2014\/10\/WeatherPiArduinoLogoShaded.png\"\u003e\u003cimg class=\"alignright wp-image-1359 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_WeatherPiArduinoLogoShaded-300x225.png?12345361184555249909\" alt=\"WeatherPiArduinoLogoShaded\" width=\"300\" height=\"225\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: This is a replacement board for the WeatherPiArduino Board. The WeatherPiArduino Version 1 product page is \u003ca href=\"http:\/\/www.switchdoc.com\/weatherpiarduino-bare-board\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e and the WeatherPiArduino Version 2 product page is \u003ca href=\"http:\/\/www.switchdoc.com\/weatherpiarduino-version-2\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e(This board is also known as the WeatherPiArduino V3)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWant to build a Weather Station with the board?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eLook at these two sources (more on the way):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s2\"\u003eWeatherBoard Specification - \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\"\u003e\u003cspan class=\"s3\"\u003ehttp:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s2\"\u003eNew GroveWeatherPi Tutorial - \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/08\/tutorial-part-1-building-a-solar-powered-raspberry-pi-weather-station-groveweatherpi\/\"\u003e\u003cspan class=\"s3\"\u003ehttp:\/\/www.switchdoc.com\/2016\/08\/tutorial-part-1-building-a-solar-powered-raspberry-pi-weather-station-groveweatherpi\/\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Weather Board for the Raspberry Pi \/ Arduino is now available and in stock! \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack Weather Sensors now available.\u003c\/a\u003e \u003ca href=\"http:\/\/www.switchdoc.com\/am2315-encased-i2c-temperature-and-humidity-sensor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOutdoor Temperature and Humidity Sensors now available.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"size-medium wp-image-12782\" style=\"float: left;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_0010-WXBOARD-DSBT.main_-300x253.jpg?49184033114260863\" alt=\"Weather Board\" width=\"300\" height=\"253\"\u003e\u003c\/p\u003e\n\u003cp\u003eWeather Board\u003c\/p\u003e\n\u003cp\u003e] \u003cstrong\u003eThe Weather Board\u003c\/strong\u003e is a weather station controller board designed to interface to Arduino and Raspberry Pi computers. It is an interface board developed by SwitchDoc Labs to allow the user to easily build a fully functioned Weather Station while allowing customization of functions. \u003cstrong\u003eThe Weather Board\u003c\/strong\u003e is derived from \u003ca title=\"Project Curacao Introduction – Part 1\" href=\"http:\/\/www.switchdoc.com\/project-curacao-introduction-part-1\/\"\u003eProject Curacao\u003c\/a\u003e and the WeatherPiArduino. Generation 1 of this board was deployed and tested in Curacao before Generation 2 was released to production. The full WeatherPiArduino article was published in\u003ca href=\"http:\/\/www.raspberry-pi-geek.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e Raspberry Pi Geek magazine\u003c\/a\u003e in September, 2014 and a follow up article has been published in April, 2015 (including the new lightning detector).  Combine the Weather Board with a \u003ca title=\"SunControl Solar Power Controller for Raspberry Pi and Arduino\" href=\"https:\/\/shop.switchdoc.com\/products\/suncontrol-advanced-solar-controller-charger-sun-tracker-data-gathering-grove-header\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSunControl \u003c\/a\u003eor \u003ca href=\"http:\/\/www.switchdoc.com\/sunairplus-solar-power-controllerdata-collector\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSunAirPlus\u003c\/a\u003e board to create a solar powered weather station.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eDownloads for the Weather Board\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eNew! The new Weather Board software auto detects your weather devices and can be configured for the ThunderBoard Lightning Detector and SunAirPlus \/ SunControl for Solar Power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherBoard\"\u003eArduino Software is here\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Weather_80422\"\u003eArduino Software for the WeatherRack and the Weather Board is here.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherBoard\"\u003eRaspberry Pi Software is here.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\"\u003eYou can download the Full Weather Board Specification here . The specification contains wiring lists for connecting the Weather Board to the Raspberry Pi and the Arduino family of products\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003eWhat are Grove Connectors?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eGrove connectors are standardized plugs for connecting devices together easily and without soldering. \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee our Full Grove Tutorial here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-11552 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_WBAnno-1024x768.jpg?1681402048385319245\" alt=\"WBAnno\" width=\"930\" height=\"698\"\u003e\u003c\/p\u003e\n\u003ch1\u003eStartup of Raspberry Pi Test Software\u003c\/h1\u003e\n\u003cpre\u003epi@RPIZero:~\/SDL_Pi_WeatherBoard $ vi WeatherBoard.py\n\nAM2315 = 28.1000003815\n\nWeather Board Demo \/ Test Version 1.6 - SwitchDoc Labs\n\n\nProgram Started at:2016-07-24 22:29:47\n\n----------------------\nDS3231: \t\tPresent\nBMP280: \t\tPresent\nFRAM: \t\tNot Present\nHTU21DF: \t\tPresent\nAM2315: \t\tPresent\nADS1015: \t\tNot Present\nADS1115: \t\tPresent\nAS3935: \t\tPresent\nOLED: \t\tPresent\nSunAirPlus: \t\tPresent\n----------------------\nswitch to Bus0\n---------------------------------------- \n----------------- \n DS3231 Real Time Clock\n----------------- \nRaspberry Pi=\t2016-07-24 22:29:47\nDS3231=\t\t2016-07-24 22:29:47\nDS3231 Temperature= \t29.25 C\n----------------- \n----------------- \n WeatherRack Weather Sensors\n----------------- \nRain Total=\t0.00 in\nWind Speed=\t0.00 MPH\nMPH wind_gust=\t0.00 MPH\nWind Direction=\t\t\t 270.00 Degrees\nWind Direction Voltage=\t\t 4.472 V\n----------------- \n----------------- \n BMP280 Barometer\n----------------- \nTemperature = \t29.48 C\nPressure = \t94.49 KPa\nAltitude = \t584.90 m\nSealevel Pressure = \t94.49 KPa\n----------------- \n----------------- \n AM2315 Temperature\/Humidity Sensor\n----------------- \nAM2315 temperature: 28.2\nAM2315 humidity: 31.2\nAM2315 crc: 1\n----------------- \n----------------- \n HTU21DF Temp\/Hum\n----------------- \nTemperature = \t28.40 C\nHumidity = \t36.70 %\n----------------- \n----------------- \n AS3935 Lightning Detector\n----------------- \nLast result from AS3935:\n----No Lightning detected---\nLightning Count = 0\n----------------- \n----------------- \n FRAM Not Present\n----------------- \n----------------- \n\n----------------- \n SunAirPlus Present\n----------------- \nLIPO_Battery Bus Voltage: 4.18 V \nLIPO_Battery Shunt Voltage: 0.64 mV \nLIPO_Battery Load Voltage: 4.18 V\nLIPO_Battery Current 1: 6.40 mA\n\nSolar Cell Bus Voltage 2: 3.08 V \nSolar Cell Shunt Voltage 2: 0.00 mV \nSolar Cell Load Voltage 2: 3.08 V\nSolar Cell Current 2: -0.00 mA\n\nOutput Bus Voltage 3: 4.98 V \nOutput Shunt Voltage 3: 22.44 mV \nOutput Load Voltage 3: 5.01 V\nOutput Current 3: 224.40 mA\n\nSleeping 10 seconds\n\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"size-medium wp-image-12784\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_4220-300x225.jpg?1852090372190818917\" alt=\"Weather Board\" width=\"300\" height=\"225\"\u003e Solar Powered Weather Board[\/caption] You can download the Full \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeather Board Specification here\u003c\/a\u003e . The specification contains wiring lists for connecting the Weather Board to the Raspberry Pi and the Arduino family of products.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-12783 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_2861-2-300x204.jpg?4793822695298194265\" alt=\"Weather Board\" width=\"300\" height=\"204\"\u003e Weather Board and Weather Rack[\/caption]\u003c\/p\u003e\n\u003ch2\u003eBlock Diagram\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-12781 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_0010-WXBOARD-DSBT.aimage3-1024x724.jpg?12490634241034148081\" alt=\"0010-WXBOARD-DSBT.aimage3\" width=\"930\" height=\"658\"\u003e It was specifically designed to interface with the SwitchDoc WeatherRack, ArgentData Weather Sensors, SparkFun Weather Meters SEN-08942 along with auxiliary I2C units.\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eInterfaces on Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eI2C for Raspberry Pi and Arduino (Board works at 3.3V and 5V)\u003c\/li\u003e\n\u003cli\u003eRJ11 Plugs installed for SwitchDoc Labs WeatherRack, etc.\u003c\/li\u003e\n\u003cli\u003eWind Vane, Rain Bucket, Anemometer computer connections for Raspberry Pi and Arduino\u003c\/li\u003e\n\u003cli\u003eGrove Connections for all interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eI2C devices Included with the Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/BST-BMP280-DS001-11.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBMP280 Barometer and Temperature Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlug in I2C Interfaces provided\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eDS3231 RTC With EEPROM\u003c\/li\u003e\n\u003cli\u003eSwitchDoc Labs Thunder Board Lightning Detector board\u003c\/li\u003e\n\u003cli\u003eAdafruit HTU21D-F Temperature\/Humidity breakout board\u003c\/li\u003e\n\u003cli\u003eAdafruit 32KB FRAM I2C breakout board\u003c\/li\u003e\n\u003cli\u003eAdafruit ADS1015 4 Channel A\/D I2C board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eI2C Device Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/BST-BMP280-DS001-11.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBMP280 (Barometer \/ Temperature)\u003c\/a\u003e \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/DS3231.pdf\"\u003eDS3231 (Real Time Clock)\u003c\/a\u003e \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/doc0336.pdf\"\u003eAT24C32 (EEPROM)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/ads1015.pdf\"\u003eADS1015 (12 bit ADC)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/AS3935_Datasheet_EN_v2.pdf\"\u003eAS3935 (Thunder Board - Lightning Detector)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/1899_HTU21D.pdf\"\u003eHTU21D-F (Humidity)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/1895_datasheet.pdf\"\u003eFRAM (32KB Fast Non-Volatile Storage)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2014\/08\/IMG_0481.jpg\"\u003e\u003cimg class=\"wp-image-697 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_0481-225x300.jpg?14293708085406744205\" alt=\"SparkFun\" width=\"225\" height=\"300\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack\u003c\/a\u003e Sensors\u003c\/p\u003e\n\u003cp\u003eThe SDL_Weather_80422 class library is designed to provide all the functions of the \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSwitchDoc WeatherRack\u003c\/a\u003e, ArgentData Weather Sensors, SparkFun Weather Meters SEN-08942 in one C++ class. The library is easy to use and hides the complexity of the interface to the sensors. The C++ class has two Interrupt Service Routines (ISR), one each for the anemometer and the rain bucket. The wind vane is connected to an Analog to Digital Converter (ADC) input pin on the Arduino. Note that the C++ class is designed to be a singleton, in other words, you only can interface one sensor package without some additional work (mostly involving Interrupts). The article in \u003ca href=\"http:\/\/www.raspberry-pi-geek.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Geek magazine\u003c\/a\u003e discusses this in detail. There are two main modes for the class.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_SAMPLE\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_SAMPLE mode means return immediately after asking for the wind speed. The wind speed is averaged at sampleTime or since you last asked, whichever is longer. If the sample time has not passed since the last call, the class returns the last calculated wind speed. That means that you will never see changes faster than the specified sample time. This allows you to not wait for the wind speed, you can just grab the last valid reading.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_DELAY\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_DELAY mode means to wait for the set sample time to expire and return the average wind speed at the expiration. You would use this if you want to make sure you have the latest value and your program architecture allows you to pause for the sample time before continuing. Which mode you use depends on the specific software architecture of your Arduino application. Typically, I use SDL_MODE_SAMPLE because I can tolerate not having a current value of wind speed. The example code for the SDL_Weather_80422 library is shown below:\u003c\/p\u003e\n\u003cpre\u003e\/*\nSDL_Weather_80422_Library.ino - Example for using SDL_Weather_80422 Library\nFor SwitchDoc Labs WeatherRack \nWeather Sensor Assembly 80422 Argent Data Systems\nSparkFun\nCreated by SwitchDoc Labs July 27, 2014.\nReleased into the public domain.\n*\/\n#include \n#include\n\n#include \"SDL_Weather_80422.h\"\n\n#define pinLED 13 \/\/ LED connected to digital pin 13\n#define pinAnem 18 \/\/ Anenometer connected to pin 18 - Int 5\n#define pinRain 2 \n#define intAnem 5\n#define intRain 0\n\n\/\/ for mega, have to use Port B - only Port B works.\n\/*\nArduino Pins PORT\n------------ ----\nDigital 0-7 D\nDigital 8-13 B\nAnalog 0-5 C\n*\/\n\n\n\/\/ initialize SDL_Weather_80422 library\nSDL_Weather_80422 weatherStation(pinAnem, pinRain, intAnem, intRain, A0, SDL_MODE_INTERNAL_AD);\n\n\nuint8_t i;\n\n\nfloat currentWindSpeed;\nfloat currentWindGust;\nfloat totalRain;\nvoid setup()\n{ \nSerial.begin(57600); \n\nSerial.println(\"-----------\");\nSerial.println(\"WeatherPiArduino SDL_Weather_80422 Class Test\");\nSerial.println(\"Version 1.0\");\nSerial.println(\"-----------\");\n\n\nweatherStation.setWindMode(SDL_MODE_SAMPLE, 5.0);\n\/\/weatherStation.setWindMode(SDL_MODE_DELAY, 5.0);\ntotalRain = 0.0;\n}\n\n\nvoid loop()\n{\nSerial.println(\"----------------\");\n\ncurrentWindSpeed = weatherStation.current_wind_speed()\/1.6;\ncurrentWindGust = weatherStation.get_wind_gust()\/1.6;\ntotalRain = totalRain + weatherStation.get_current_rain_total()\/25.4;\nSerial.print(\"rain_total=\");\nSerial.print(totalRain);\nSerial.print(\"\"\" wind_speed=\");\nSerial.print(currentWindSpeed);\nSerial.print(\"MPH wind_gust=\");\nSerial.print(currentWindGust);\nSerial.print(\"MPH wind_direction=\");\nSerial.println(weatherStation.current_wind_direction());\n\n\ndelay(1000);\n\n\n}\n\u003c\/pre\u003e\n\u003cp\u003eWhen you run this, you should get a result similar to this:\u003c\/p\u003e\n\u003cpre\u003e-----------\n\nWeatherArduino SDL_Weather_80422 Class Test\nVersion 1.0\n\n-----------\n----------------\nrain_total=0.00 wind_speed=13.20MPH wind_gust=12.40MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=9.60MPH wind_gust=9.48MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=10.20MPH wind_gust=9.23MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=11.10MPH wind_gust=9.84MPH wind_direction=90.00\n\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(3340711297054, { variant: {"id":3340711297054,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0010-WXBOARD-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"The Weather Board w\/Grove - Interface board for Weather Instruments for Raspberry Pi \/ Arduino","public_title":null,"options":["Default Title"],"price":2499,"weight":14,"compare_at_price":2999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"710465466203","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229341429790, product_handle: "the-weather-board-w-grove-interface-board-for-weather-instruments-for-raspberry-pi-arduino", price: 2499, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-mini-pro-lp-arduino-board", 229344575518, {"id":229344575518,"title":"Grove Mini Pro LP Arduino Board","handle":"grove-mini-pro-lp-arduino-board","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eA Low Power Arduino Board - Designed for Solar!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe Arduino family of processors is a fabulous prototyping and building system for Makers. The combination of the Arduino IDE with its thousands of available drivers for sensors and the ATMega line of processors have spawned a tremendous burst of creativity around the world.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eAt SwitchDoc Labs we have been building and writing about Arduino projects for years. From Project Curacao in the tropics to specialized Arduino based solar powered weather stations, we have extensively used these devices in many ways.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e12\/9\/2017 Update:  Now at 16MHz clock speed\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s3\"\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/08\/GroveMiniProLP_Current_Specification.pdf\"\u003e- Grove Pin Pro LP Specification\u003c\/a\u003e (Note:  Processor is now at 16MHz)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduinio_WXLink_Tx\"\u003e\u003cspan class=\"s4\"\u003e- WXLink Transmitter Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s4\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WXLink_Rx\"\u003e- WXLink Receiver Code - Makes the Grove Pro Mini LP behave as an I2C device (Slave)\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eEnter the Grove Pro Mini LP Arduino Board.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"719\" width=\"812\" alt=\"img-9451.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9451.jpg?15006618773488505897\" title=\"img-9451.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eThe Grove Pro Mini LP Board in the Sunshine!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cimg height=\"680\" width=\"961\" alt=\"figure4.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_figure4.png?16863433594726989259\" title=\"figure4.png\" class=\"__mce_add_custom__\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"450\" width=\"600\" alt=\"figure7.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_figure7.jpg?848824812907511835\" title=\"figure7.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eSolar Grove Mini Pro LP Far From Home (430 meters) powering the WXLink kit from SwitchDoc Labs\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat did we do on this Board?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eIn building all these projects with off the shelf Arduino devices we realized that we were missing two features.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eReally Low Power Usage\u003cstrong\u003e (for Solar applications!)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eGrove Connector Compatibility for IOT Prototyping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eATmega328P Processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eArduino Pro Mini Compatible Pinout\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eUnder 1mA sleep current\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003e3.3V - 5V \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eArduino IDE Compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eThousands of drivers available\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eCompatible with Hundreds of Grove Sensors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eAnd this is why we are building the Grove Pro Mini LP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eWe redesigned the Arduino Pro Mini LP board to be very low power. We removed the regulating power supply, and provided 3.3V and 5V compatibility. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat is the Arduino Compatible Grove Pro Mini LP?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eBelow is an annotated picture of the Grove Pro Mini LP showing all of the connections available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"600\" width=\"600\" alt=\"img-9468.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9468.jpg?17347849871448609122\" title=\"img-9468.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eAnnotated Grove Pro Mini LP Board - Grove everywhere!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eAll those Grove Connections for IOT Prototyping Goodness!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eJP4, JP5 and JP6 preserve the original Arduino Pro Mini Pinout.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eThe Grove Pro Mini LP keeps the Arduino Pro Mini Pinout\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eThe Magic Chart!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe Grove Pro Mini LP has the pinout of the Arduino Pro Mini LP but has been modified for low power. Here is a comparison of power used by various Arduino devices compared to the Grove Pro Mini LP:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"292\" width=\"666\" alt=\"screen-shot-2016-08-02-at-9.10.14-am.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_screen-shot-2016-08-02-at-9.10.14-am.png?2410701651197448778\" title=\"screen-shot-2016-08-02-at-9.10.14-am.png\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eGrove Pro Mini LP Power Consumption\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eOur design goals were 2mA sleeping at 5V and 1mA sleeping at 3.3V so we beat our design goals! Less power means \u003cstrong\u003emore battery life\u003c\/strong\u003e and \u003cstrong\u003esmaller and cheaper solar power systems.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eGo Solar!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eTo go solar you need a low power processor unless you want BIG Solar Panels. We are providing in the rewards two inexpensive sizes of Solar Panels and if you want to go bigger, there are the excellent panels from our buddies at Voltaic Systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"619\" width=\"600\" alt=\"fullsizerender-23.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_fullsizerender-23.jpg?17236921488952287928\" title=\"fullsizerender-23.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eTesting our Solar Panels\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch2 class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eMore Data! More Data! More Cowbell!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"450\" width=\"600\" alt=\"img-9603.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9603.jpg?5346052786736440392\" title=\"img-9603.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eSunAirPlus\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat can you do with the Grove Pro Mini LP?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eBattery Operated IOT Device\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThis device uses the Mini Pro LP to control an ESP8266 for WiFI (turning it off between transmissions for power considerations) while read the temperature and humidity from a Grove AM2315 and a Grove Sunlight Sensor (reading visible, infrared and UV) through the I2C interface. Powered straight from a LiPo batter. All ready to \u003cstrong\u003ego solar!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eOur WXLink Radio Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eOne of the inspirations for this project was the previous kickstarter we did, \"The Weather Board for the Raspberry Pi\". One of the devices that the Weather Board connects to is the SwitchDoc Labs WeatherRack wind and rain sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"604\" width=\"600\" alt=\"img-9636.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9636.jpg?8943680559768675057\" title=\"img-9636.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eWeatherRack Wind and Rain Sensor\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe issue is sometimes you don't want to run a wire all the way from the Weather Station to the wind and rain sensor. Like all the time. So, using the Mini Pro LP, we build a solar powered WeatherRack reader and then we use a transmitter to send it back to the station inside the lab. Did it on an average power of less than 5mA which made solar power easy to add. No power. No wires. More on this project in the next few weeks. Here is the complete project on a walkabout near the Spokane river. 433 meter (1,473 feet) range. Amazing for a little solar powered device!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"450\" width=\"600\" alt=\"img-9431.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9431.jpg?12948185576591908825\" title=\"img-9431.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eSolar Powered Mini Pro LP on a Walkabout\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eMore applications to come!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat is the Grove IOT Prototyping System?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe way we have been wiring I2C connections before just didn't work for building fast and quick IOT projects. Then we found Grove.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat is a Grove Connector?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThere are hundreds of Grove Devices from multiple manufacturers around the world. Just check out Seeedstudio. Just for a quick look at over 100 boards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eYou can't plug it in backwards. If you put the connector in the wrong plug it just doesn't work. No smoke. No fire. This makes us happy as we look over into our Box Of Death, filled with boards we have ruined. No more additions to the BOD! Well, hopefully. Have faith.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eWe quickly found the connectors and their respective cables very useful. With the large selection of Grove I2C devices available, we decided to include a Grove connector on all our future boards and products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eFor more information, check out our \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\"\u003e\u003cspan class=\"s2\"\u003efull Grove Tutorial here\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eFor up to date information on Grove, you can check out our \u003ca href=\"http:\/\/groveweekly.switchdoc.com\/\"\u003e\u003cspan class=\"s2\"\u003eGroveWeekly Newsletter here\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eBoard Compatibility\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eYes, this board is designed to be compatible with Arduino devices. But, wait, there's more. We designed it to be 3.3V and 5V compatible, so it works perfectly with a Raspberry Pi based processor. It can work with the ESP8266 too (since the Pro Mini LP will work at 3.3V).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eThe Science Behind The Board\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eOur beloved (most of the time) CTO, Dr. John Shovic, always insists on putting in something about the theory behind the board. Here are his thoughts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003e\"We build a lot of solar powered devices around SwitchDoc Labs. Projects for books, project for articles and customer specific devices. The thing we were missing was an easy way to build prototypes or one-off devices for experiments or customers that are robust and easy and quick to wire up. That was the thought for Grove connectors. The second criteria is that we had to get the power way down from the Arduino. At least 10 times lower. That would give us solar power flexibility that we have not been able to achieve with the normal Arduino or the Raspberry Pi. We looked at the entire board and did away with anything that was not strictly necessary and worked on the power consumption that was left. \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eOne key piece of the design was to make sure we could put the processor to sleep and then wake it up from internal and external sources. The interrupts are set up that way. \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-10-19T21:20:59-07:00","created_at":"2017-10-19T21:20:59-07:00","vendor":"vendor-unknown","type":"Shop All,Weather,Grove,Arduino,Wireless","tags":[],"price":600,"price_min":600,"price_max":600,"available":true,"price_varies":false,"compare_at_price":1495,"compare_at_price_min":1495,"compare_at_price_max":1495,"compare_at_price_varies":false,"variants":[{"id":3340762415134,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0098-GPMLP16-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grove Mini Pro LP Arduino Board","public_title":null,"options":["Default Title"],"price":600,"weight":85,"compare_at_price":1495,"inventory_quantity":85,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d86e911a9892b0455821c1f69b63355e.jpg?v=1508473259","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/889fdc0c75ee98724a565a4fa0b1ba12.jpg?v=1508473259","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5d3c2469ed4fafa94738cea5ac629bd0.png?v=1508473259","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/512da1976520122a73a2d32403ba3fcb.png?v=1508473259"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d86e911a9892b0455821c1f69b63355e.jpg?v=1508473259","options":["Title"],"media":[{"alt":"Grove Mini Pro LP Arduino Board","id":828930850860,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d86e911a9892b0455821c1f69b63355e.jpg?v=1508473259"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d86e911a9892b0455821c1f69b63355e.jpg?v=1508473259","width":1280},{"alt":"Grove Mini Pro LP Arduino Board","id":828930883628,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/889fdc0c75ee98724a565a4fa0b1ba12.jpg?v=1508473259"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/889fdc0c75ee98724a565a4fa0b1ba12.jpg?v=1508473259","width":1280},{"alt":"Grove Mini Pro LP Arduino Board","id":828930949164,"position":3,"preview_image":{"aspect_ratio":1.413,"height":680,"width":961,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5d3c2469ed4fafa94738cea5ac629bd0.png?v=1508473259"},"aspect_ratio":1.413,"height":680,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5d3c2469ed4fafa94738cea5ac629bd0.png?v=1508473259","width":961},{"alt":"Grove Mini Pro LP Arduino Board","id":828931014700,"position":4,"preview_image":{"aspect_ratio":1.391,"height":593,"width":825,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/512da1976520122a73a2d32403ba3fcb.png?v=1508473259"},"aspect_ratio":1.391,"height":593,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/512da1976520122a73a2d32403ba3fcb.png?v=1508473259","width":825}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eA Low Power Arduino Board - Designed for Solar!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe Arduino family of processors is a fabulous prototyping and building system for Makers. The combination of the Arduino IDE with its thousands of available drivers for sensors and the ATMega line of processors have spawned a tremendous burst of creativity around the world.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eAt SwitchDoc Labs we have been building and writing about Arduino projects for years. From Project Curacao in the tropics to specialized Arduino based solar powered weather stations, we have extensively used these devices in many ways.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e12\/9\/2017 Update:  Now at 16MHz clock speed\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s3\"\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/08\/GroveMiniProLP_Current_Specification.pdf\"\u003e- Grove Pin Pro LP Specification\u003c\/a\u003e (Note:  Processor is now at 16MHz)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduinio_WXLink_Tx\"\u003e\u003cspan class=\"s4\"\u003e- WXLink Transmitter Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s4\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WXLink_Rx\"\u003e- WXLink Receiver Code - Makes the Grove Pro Mini LP behave as an I2C device (Slave)\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eEnter the Grove Pro Mini LP Arduino Board.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"719\" width=\"812\" alt=\"img-9451.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9451.jpg?15006618773488505897\" title=\"img-9451.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eThe Grove Pro Mini LP Board in the Sunshine!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cimg height=\"680\" width=\"961\" alt=\"figure4.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_figure4.png?16863433594726989259\" title=\"figure4.png\" class=\"__mce_add_custom__\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"450\" width=\"600\" alt=\"figure7.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_figure7.jpg?848824812907511835\" title=\"figure7.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eSolar Grove Mini Pro LP Far From Home (430 meters) powering the WXLink kit from SwitchDoc Labs\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat did we do on this Board?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eIn building all these projects with off the shelf Arduino devices we realized that we were missing two features.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eReally Low Power Usage\u003cstrong\u003e (for Solar applications!)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eGrove Connector Compatibility for IOT Prototyping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eATmega328P Processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eArduino Pro Mini Compatible Pinout\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eUnder 1mA sleep current\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003e3.3V - 5V \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eArduino IDE Compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eThousands of drivers available\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s1\"\u003eCompatible with Hundreds of Grove Sensors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eAnd this is why we are building the Grove Pro Mini LP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eWe redesigned the Arduino Pro Mini LP board to be very low power. We removed the regulating power supply, and provided 3.3V and 5V compatibility. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat is the Arduino Compatible Grove Pro Mini LP?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eBelow is an annotated picture of the Grove Pro Mini LP showing all of the connections available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"600\" width=\"600\" alt=\"img-9468.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9468.jpg?17347849871448609122\" title=\"img-9468.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eAnnotated Grove Pro Mini LP Board - Grove everywhere!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eAll those Grove Connections for IOT Prototyping Goodness!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eJP4, JP5 and JP6 preserve the original Arduino Pro Mini Pinout.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eThe Grove Pro Mini LP keeps the Arduino Pro Mini Pinout\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eThe Magic Chart!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe Grove Pro Mini LP has the pinout of the Arduino Pro Mini LP but has been modified for low power. Here is a comparison of power used by various Arduino devices compared to the Grove Pro Mini LP:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"292\" width=\"666\" alt=\"screen-shot-2016-08-02-at-9.10.14-am.png\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_screen-shot-2016-08-02-at-9.10.14-am.png?2410701651197448778\" title=\"screen-shot-2016-08-02-at-9.10.14-am.png\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eGrove Pro Mini LP Power Consumption\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eOur design goals were 2mA sleeping at 5V and 1mA sleeping at 3.3V so we beat our design goals! Less power means \u003cstrong\u003emore battery life\u003c\/strong\u003e and \u003cstrong\u003esmaller and cheaper solar power systems.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eGo Solar!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eTo go solar you need a low power processor unless you want BIG Solar Panels. We are providing in the rewards two inexpensive sizes of Solar Panels and if you want to go bigger, there are the excellent panels from our buddies at Voltaic Systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"619\" width=\"600\" alt=\"fullsizerender-23.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_fullsizerender-23.jpg?17236921488952287928\" title=\"fullsizerender-23.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eTesting our Solar Panels\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\n\u003cspan class=\"s1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch2 class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eMore Data! More Data! More Cowbell!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"450\" width=\"600\" alt=\"img-9603.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9603.jpg?5346052786736440392\" title=\"img-9603.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eSunAirPlus\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat can you do with the Grove Pro Mini LP?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eBattery Operated IOT Device\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThis device uses the Mini Pro LP to control an ESP8266 for WiFI (turning it off between transmissions for power considerations) while read the temperature and humidity from a Grove AM2315 and a Grove Sunlight Sensor (reading visible, infrared and UV) through the I2C interface. Powered straight from a LiPo batter. All ready to \u003cstrong\u003ego solar!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eOur WXLink Radio Application\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eOne of the inspirations for this project was the previous kickstarter we did, \"The Weather Board for the Raspberry Pi\". One of the devices that the Weather Board connects to is the SwitchDoc Labs WeatherRack wind and rain sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"604\" width=\"600\" alt=\"img-9636.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9636.jpg?8943680559768675057\" title=\"img-9636.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eWeatherRack Wind and Rain Sensor\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe issue is sometimes you don't want to run a wire all the way from the Weather Station to the wind and rain sensor. Like all the time. So, using the Mini Pro LP, we build a solar powered WeatherRack reader and then we use a transmitter to send it back to the station inside the lab. Did it on an average power of less than 5mA which made solar power easy to add. No power. No wires. More on this project in the next few weeks. Here is the complete project on a walkabout near the Spokane river. 433 meter (1,473 feet) range. Amazing for a little solar powered device!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cimg height=\"450\" width=\"600\" alt=\"img-9431.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9431.jpg?12948185576591908825\" title=\"img-9431.jpg\" class=\"__mce_add_custom__\"\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eSolar Powered Mini Pro LP on a Walkabout\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eMore applications to come!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat is the Grove IOT Prototyping System?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe way we have been wiring I2C connections before just didn't work for building fast and quick IOT projects. Then we found Grove.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eWhat is a Grove Connector?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThere are hundreds of Grove Devices from multiple manufacturers around the world. Just check out Seeedstudio. Just for a quick look at over 100 boards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eYou can't plug it in backwards. If you put the connector in the wrong plug it just doesn't work. No smoke. No fire. This makes us happy as we look over into our Box Of Death, filled with boards we have ruined. No more additions to the BOD! Well, hopefully. Have faith.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eWe quickly found the connectors and their respective cables very useful. With the large selection of Grove I2C devices available, we decided to include a Grove connector on all our future boards and products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eFor more information, check out our \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\"\u003e\u003cspan class=\"s2\"\u003efull Grove Tutorial here\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eFor up to date information on Grove, you can check out our \u003ca href=\"http:\/\/groveweekly.switchdoc.com\/\"\u003e\u003cspan class=\"s2\"\u003eGroveWeekly Newsletter here\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eBoard Compatibility\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eYes, this board is designed to be compatible with Arduino devices. But, wait, there's more. We designed it to be 3.3V and 5V compatible, so it works perfectly with a Raspberry Pi based processor. It can work with the ESP8266 too (since the Pro Mini LP will work at 3.3V).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eThe Science Behind The Board\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eOur beloved (most of the time) CTO, Dr. John Shovic, always insists on putting in something about the theory behind the board. Here are his thoughts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003e\"We build a lot of solar powered devices around SwitchDoc Labs. Projects for books, project for articles and customer specific devices. The thing we were missing was an easy way to build prototypes or one-off devices for experiments or customers that are robust and easy and quick to wire up. That was the thought for Grove connectors. The second criteria is that we had to get the power way down from the Arduino. At least 10 times lower. That would give us solar power flexibility that we have not been able to achieve with the normal Arduino or the Raspberry Pi. We looked at the entire board and did away with anything that was not strictly necessary and worked on the power consumption that was left. \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cem\u003eOne key piece of the design was to make sure we could put the processor to sleep and then wake it up from internal and external sources. The interrupts are set up that way. \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(3340762415134, { variant: {"id":3340762415134,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0098-GPMLP16-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grove Mini Pro LP Arduino Board","public_title":null,"options":["Default Title"],"price":600,"weight":85,"compare_at_price":1495,"inventory_quantity":85,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 85, product_id: 229344575518, product_handle: "grove-mini-pro-lp-arduino-board", price: 600, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("wireless-inside-temperature-and-humidity-sensor-f007th", 5458277728423, {"id":5458277728423,"title":"WeatherSense Wireless Inside Temperature and Humidity Sensor F016TH","handle":"wireless-inside-temperature-and-humidity-sensor-f007th","description":"\u003cp\u003eThe SwitchDoc Labs F016TH (compatible with the F007TH)  is a 433MHz wireless temperature and humidity sensor designed for use with the Smart Garden System, the WeatherRack2 system and the SkyWeather2 system.   Fully WeatherSense Compatible.\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003eYou can have up to 8 of these in your system.   Each has a full temperature and humidity sensor.\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/04\/WeatherRack2Installation1.3.pdf\" target=\"_blank\"\u003eWeatherRack2 and F016TH Installation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/rtl_433\"\u003ertl_433 Open Source Software supporting WeatherRack2 and Indoor T\/H sensors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherRack2\"\u003eWeatherRack2 Raspberry P Python Test and Example Software\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IndoorSpecs_480x480.png?v=1604885043\"\u003e\u003c\/p\u003e\n\u003ch2\u003eExample of the Output of the F016TH Sensor\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003eHere is an example of results coming in from the F016TH (F007TH)  from the PythonTest Software:\u003c\/div\u003e\n\u003cpre\u003epi@SwitchDocLabs:~\/SDL_Pi_WeatherRack2 $ sudo python3 readWeatherSensors.py\nStarting Wireless Read\n\n\n\n{\"time\" : \"2020-07-09 10:54:16\", \"model\" : \"SwitchDoc Labs F007TH Thermo-Hygrometer\", \"device\" : 233, \"modelnumber\" : 5, \"channel\" : 3, \"battery\" : \"OK\", \"temperature_F\" : 72.100, \"humidity\" : 45, \"mic\" : \"CRC\"}\n\nThis is the raw data: {\"time\" : \"2020-07-09 10:54:16\", \"model\" : \"SwitchDoc Labs F007TH Thermo-Hygrometer\", \"device\" : 233, \"modelnumber\" : 5, \"channel\" : 3, \"battery\" : \"OK\", \"temperature_F\" : 72.100, \"humidity\" : 45, \"mic\" : \"CRC\"}\n\n\n\u003c\/pre\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cul\u003e\n\u003cli\u003etime: Time of Message Reception\u003c\/li\u003e\n\u003cli\u003emodel: SwitchDoc Labs F007TH\u003c\/li\u003e\n\u003cli\u003edevice:  Serial Number of the sensor - changed on powerup but can be used to discriminate from other similar sensors in the area\u003c\/li\u003e\n\u003cli\u003emodelnumber: internal number indicating F007TH\u003c\/li\u003e\n\u003cli\u003echannel: channel number you have set\u003c\/li\u003e\n\u003cli\u003ebatterylow: OK if battery good, LOW if battery is getting low\u003c\/li\u003e\n\u003cli\u003etemperature_F:  Temperature in Fahrenheit\u003c\/li\u003e\n\u003cli\u003ehumidity:  Relative humidity in %\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-07-10T15:12:06-07:00","created_at":"2020-07-10T15:12:05-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":1595,"price_min":1595,"price_max":1595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35159529717927,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0014-WRINDTHSENS-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"WeatherSense Wireless Inside Temperature and Humidity Sensor F016TH","public_title":null,"options":["Default Title"],"price":1595,"weight":86,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234729034","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_42842.jpg?v=1594419151","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_26462.jpg?v=1594419159"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_42842.jpg?v=1594419151","options":["Title"],"media":[{"alt":null,"id":10079087886503,"position":1,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_42842.jpg?v=1594419151"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_42842.jpg?v=1594419151","width":3024},{"alt":null,"id":10079089131687,"position":2,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_26462.jpg?v=1594419159"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_26462.jpg?v=1594419159","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe SwitchDoc Labs F016TH (compatible with the F007TH)  is a 433MHz wireless temperature and humidity sensor designed for use with the Smart Garden System, the WeatherRack2 system and the SkyWeather2 system.   Fully WeatherSense Compatible.\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003eYou can have up to 8 of these in your system.   Each has a full temperature and humidity sensor.\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/04\/WeatherRack2Installation1.3.pdf\" target=\"_blank\"\u003eWeatherRack2 and F016TH Installation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/rtl_433\"\u003ertl_433 Open Source Software supporting WeatherRack2 and Indoor T\/H sensors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherRack2\"\u003eWeatherRack2 Raspberry P Python Test and Example Software\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IndoorSpecs_480x480.png?v=1604885043\"\u003e\u003c\/p\u003e\n\u003ch2\u003eExample of the Output of the F016TH Sensor\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003eHere is an example of results coming in from the F016TH (F007TH)  from the PythonTest Software:\u003c\/div\u003e\n\u003cpre\u003epi@SwitchDocLabs:~\/SDL_Pi_WeatherRack2 $ sudo python3 readWeatherSensors.py\nStarting Wireless Read\n\n\n\n{\"time\" : \"2020-07-09 10:54:16\", \"model\" : \"SwitchDoc Labs F007TH Thermo-Hygrometer\", \"device\" : 233, \"modelnumber\" : 5, \"channel\" : 3, \"battery\" : \"OK\", \"temperature_F\" : 72.100, \"humidity\" : 45, \"mic\" : \"CRC\"}\n\nThis is the raw data: {\"time\" : \"2020-07-09 10:54:16\", \"model\" : \"SwitchDoc Labs F007TH Thermo-Hygrometer\", \"device\" : 233, \"modelnumber\" : 5, \"channel\" : 3, \"battery\" : \"OK\", \"temperature_F\" : 72.100, \"humidity\" : 45, \"mic\" : \"CRC\"}\n\n\n\u003c\/pre\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cul\u003e\n\u003cli\u003etime: Time of Message Reception\u003c\/li\u003e\n\u003cli\u003emodel: SwitchDoc Labs F007TH\u003c\/li\u003e\n\u003cli\u003edevice:  Serial Number of the sensor - changed on powerup but can be used to discriminate from other similar sensors in the area\u003c\/li\u003e\n\u003cli\u003emodelnumber: internal number indicating F007TH\u003c\/li\u003e\n\u003cli\u003echannel: channel number you have set\u003c\/li\u003e\n\u003cli\u003ebatterylow: OK if battery good, LOW if battery is getting low\u003c\/li\u003e\n\u003cli\u003etemperature_F:  Temperature in Fahrenheit\u003c\/li\u003e\n\u003cli\u003ehumidity:  Relative humidity in %\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"q62b-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(35159529717927, { variant: {"id":35159529717927,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0014-WRINDTHSENS-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"WeatherSense Wireless Inside Temperature and Humidity Sensor F016TH","public_title":null,"options":["Default Title"],"price":1595,"weight":86,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234729034","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 39, product_id: 5458277728423, product_handle: "wireless-inside-temperature-and-humidity-sensor-f007th", price: 1595, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("weatherplus-all-in-one-weather-station-controller", 229325864990, {"id":229325864990,"title":"WeatherPlus2 - All in One Weather Station Controller","handle":"weatherplus-all-in-one-weather-station-controller","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWeatherPlus2 is an all in one weather station controller and is the board that is used in the \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/ourweather-complete-weather-kit?_pos=2\u0026amp;_sid=f50ebc415\u0026amp;_ss=r\"\u003eOurWeather Complete Weather Kit\u003c\/a\u003e. WeatherPlus2 contains an ESP32 processor (includes WiFi) and does not require an external computer to run. If you want to program the WeatherPlus2 board, we supply all of the source code to allow you to do that. The software for the board is written using the Arduino IDE with the ESP32 libraries added. Here is our tutorial on how to \u003ca href=\"http:\/\/www.switchdoc.com\/2015\/11\/iot-esp8266-tutorial-using-the-arduino-ide\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003einstall the Arduino IDE for the ESP8266\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:  Requires an external UFL a\u003c\/strong\u003e\u003cstrong\u003entenna!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-id=\"5389791\"\u003eTwo accessories from SwitchDoc Labs you might want are:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli class=\"template asset\" data-id=\"5389791\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/grove-128x64-i2c-oled-board-arduino-raspberry-pi\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGrove OLED Display (fits Grove connector on Weather Plus2)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"template asset\" data-id=\"5389791\"\u003e- \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/sht30-i2c-waterproof-temperature-and-humidity-sensor-with-grove\"\u003eGrove SHT30 Outside Humidity and Temperature Sensor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"the-icons\"\u003e\n\u003cli\u003eProvides an excellent controller for a Weather Station hooked up to Raspberry Pi or Arduino\u003c\/li\u003e\n\u003cli\u003eIncludes Arduino and Raspberry Pi Software\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSupports SwitchDoc Labs WeatherRack Wind Vane \/ Anemometer \/ Rain Bucket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eInside Temperature and Barometric Pressure\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUses standard GROVE connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWorks with Raspberry Pi (3.3V) GPIO and Arduino (5.0V) GPIO\u003c\/li\u003e\n\u003cli\u003eWorks with 3.3V and 5.0V I2C bus\u003c\/li\u003e\n\u003cli\u003eAll onboard devices are 3.3V\u003c\/li\u003e\n\u003cli\u003eSupports I2C Lightning Detector Thunder Board\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/am2315-encased-i2c-temperature-and-humidity-sensor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSupports I2C AM2315 Temp\/Hum Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/sht30-i2c-waterproof-temperature-and-humidity-sensor-with-grove\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSupports I2C SHT30 Temp\/Humidity Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull Source Code Provided\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat are Grove Connectors?\u003c\/h2\u003e\n\u003cp\u003eGrove Connectors are a standard way of connecting a variety of devices quickly and safely. \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee our full tutorial here.\u003c\/a\u003e The WeatherPlus2 board has an I2C Grove Connector that can be connected to 3.3V I2C devices.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eQuestions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eQ: I only have one I2C connector on my WeatherPlus board?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA: You have a Revision 1 board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eQ: I only have two I2C connectors on my WeatherPlus Board?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA:  You have a Revision 1 board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch2\u003eDownloads For WeatherPlus2 Board\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_4600_480x480.jpg?v=1573091520\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eWeatherPlus2 Board\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/02\/WeatherPlus2-V1.4.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCurrent Specification: WeatherPlus2_Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_OurWeather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGithub Source Code Archive for WeatherPlus\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAdvanced Programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eDownloads For WeatherPlus Revision 1 Board\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/07571deb787fd28f47512b2205205f6c.jpg?v=1508473007\" alt=\"WeatherPlus - All in One Weather Station Controller\" width=\"437\" height=\"327\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWeatherPlus Version 1\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent Specification:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/WeatherPlus_CurrentSpecification.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherPlus_Specification\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGithub Source Code Archive for WeatherPlus\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/03\/OurWeatherAdvancedUsageManual4.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdvanced Programming\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe embrace the open source model of software! There are lots of LEDs on the OurWeather Board to allow you to know what is going on. The GPIO0 LED can be controlled by a simple call on the web (for example: http:\/\/192.168.1.134\/led?params=0) where the argument is 0 for GPIO0 LED off and 1 to turn it on.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSimple! The other LEDs show if the board is plugged in and what is going on with the instruments. However, you can display a lot more using a \u003ca href=\"http:\/\/www.switchdoc.com\/grove-128x64-i2c-oled-board-arduino-raspberry-pi\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGrove OLED display\u003c\/a\u003e. There is built in software support for this OLED display.\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-id=\"5379350\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe WeatherPlus Board\u003c\/h2\u003e\n\u003cp\u003eOurWeather contains the customizable WeatherPlus board.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"template asset\" data-id=\"5379350\"\u003eSwitchDoc Labs Custom Grove OLED Display\u003c\/h2\u003e\n\u003cp\u003eYou can put big numbers up on the display (and graphs too if you are clever!) and also show a lot of information at the same time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cimg class=\"fit\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/005\/379\/350\/057e0b3257ecb24eeab8a2abbbb6ae7a_original.JPG?w=680\u0026amp;fit=max\u0026amp;v=1455753014\u0026amp;auto=format\u0026amp;q=92\u0026amp;s=4be590735ba250651158a4e04f6a1b3c\" alt=\"Custom OLED Display for OurWeather\"\u003e\u003c\/h2\u003e","published_at":"2017-10-19T21:16:45-07:00","created_at":"2017-10-19T21:16:47-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":5995,"price_min":5995,"price_max":5995,"available":true,"price_varies":false,"compare_at_price":7995,"compare_at_price_min":7995,"compare_at_price_max":7995,"compare_at_price_varies":false,"variants":[{"id":3340452364318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0690-WTHRPLUS2-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WeatherPlus2 - All in One Weather Station Controller","public_title":null,"options":["Default Title"],"price":5995,"weight":57,"compare_at_price":7995,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728945","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2289.jpg?v=1581110945","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4741.jpg?v=1581110952","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4813.jpg?v=1581110952","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/DeviceAnno_2e00b3b2-8dc4-41db-a7d1-2bf9d6194ab3.jpg?v=1581110962","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/LEDAnno_0d5dfe3f-c47b-483a-86b3-f42c99c37316.jpg?v=1581110962"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2289.jpg?v=1581110945","options":["Title"],"media":[{"alt":null,"id":6269430104108,"position":1,"preview_image":{"aspect_ratio":1.783,"height":1976,"width":3523,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2289.jpg?v=1581110945"},"aspect_ratio":1.783,"height":1976,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2289.jpg?v=1581110945","width":3523},{"alt":null,"id":5520989683756,"position":2,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4741.jpg?v=1581110952"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4741.jpg?v=1581110952","width":4032},{"alt":null,"id":5520990044204,"position":3,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4813.jpg?v=1581110952"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4813.jpg?v=1581110952","width":4032},{"alt":null,"id":5521024319532,"position":4,"preview_image":{"aspect_ratio":1.559,"height":700,"width":1091,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/DeviceAnno_2e00b3b2-8dc4-41db-a7d1-2bf9d6194ab3.jpg?v=1581110962"},"aspect_ratio":1.559,"height":700,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/DeviceAnno_2e00b3b2-8dc4-41db-a7d1-2bf9d6194ab3.jpg?v=1581110962","width":1091},{"alt":null,"id":5521024352300,"position":5,"preview_image":{"aspect_ratio":1.559,"height":700,"width":1091,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/LEDAnno_0d5dfe3f-c47b-483a-86b3-f42c99c37316.jpg?v=1581110962"},"aspect_ratio":1.559,"height":700,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/LEDAnno_0d5dfe3f-c47b-483a-86b3-f42c99c37316.jpg?v=1581110962","width":1091}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWeatherPlus2 is an all in one weather station controller and is the board that is used in the \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/ourweather-complete-weather-kit?_pos=2\u0026amp;_sid=f50ebc415\u0026amp;_ss=r\"\u003eOurWeather Complete Weather Kit\u003c\/a\u003e. WeatherPlus2 contains an ESP32 processor (includes WiFi) and does not require an external computer to run. If you want to program the WeatherPlus2 board, we supply all of the source code to allow you to do that. The software for the board is written using the Arduino IDE with the ESP32 libraries added. Here is our tutorial on how to \u003ca href=\"http:\/\/www.switchdoc.com\/2015\/11\/iot-esp8266-tutorial-using-the-arduino-ide\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003einstall the Arduino IDE for the ESP8266\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:  Requires an external UFL a\u003c\/strong\u003e\u003cstrong\u003entenna!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-id=\"5389791\"\u003eTwo accessories from SwitchDoc Labs you might want are:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli class=\"template asset\" data-id=\"5389791\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/grove-128x64-i2c-oled-board-arduino-raspberry-pi\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGrove OLED Display (fits Grove connector on Weather Plus2)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"template asset\" data-id=\"5389791\"\u003e- \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/sht30-i2c-waterproof-temperature-and-humidity-sensor-with-grove\"\u003eGrove SHT30 Outside Humidity and Temperature Sensor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"the-icons\"\u003e\n\u003cli\u003eProvides an excellent controller for a Weather Station hooked up to Raspberry Pi or Arduino\u003c\/li\u003e\n\u003cli\u003eIncludes Arduino and Raspberry Pi Software\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSupports SwitchDoc Labs WeatherRack Wind Vane \/ Anemometer \/ Rain Bucket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eInside Temperature and Barometric Pressure\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUses standard GROVE connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWorks with Raspberry Pi (3.3V) GPIO and Arduino (5.0V) GPIO\u003c\/li\u003e\n\u003cli\u003eWorks with 3.3V and 5.0V I2C bus\u003c\/li\u003e\n\u003cli\u003eAll onboard devices are 3.3V\u003c\/li\u003e\n\u003cli\u003eSupports I2C Lightning Detector Thunder Board\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/am2315-encased-i2c-temperature-and-humidity-sensor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSupports I2C AM2315 Temp\/Hum Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/sht30-i2c-waterproof-temperature-and-humidity-sensor-with-grove\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSupports I2C SHT30 Temp\/Humidity Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull Source Code Provided\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat are Grove Connectors?\u003c\/h2\u003e\n\u003cp\u003eGrove Connectors are a standard way of connecting a variety of devices quickly and safely. \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee our full tutorial here.\u003c\/a\u003e The WeatherPlus2 board has an I2C Grove Connector that can be connected to 3.3V I2C devices.\u003c\/p\u003e\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eQuestions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eQ: I only have one I2C connector on my WeatherPlus board?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA: You have a Revision 1 board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eQ: I only have two I2C connectors on my WeatherPlus Board?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eA:  You have a Revision 1 board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch2\u003eDownloads For WeatherPlus2 Board\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_4600_480x480.jpg?v=1573091520\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eWeatherPlus2 Board\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/02\/WeatherPlus2-V1.4.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCurrent Specification: WeatherPlus2_Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_OurWeather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGithub Source Code Archive for WeatherPlus\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAdvanced Programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eDownloads For WeatherPlus Revision 1 Board\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/07571deb787fd28f47512b2205205f6c.jpg?v=1508473007\" alt=\"WeatherPlus - All in One Weather Station Controller\" width=\"437\" height=\"327\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWeatherPlus Version 1\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent Specification:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/WeatherPlus_CurrentSpecification.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherPlus_Specification\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGithub Source Code Archive for WeatherPlus\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/03\/OurWeatherAdvancedUsageManual4.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdvanced Programming\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe embrace the open source model of software! There are lots of LEDs on the OurWeather Board to allow you to know what is going on. The GPIO0 LED can be controlled by a simple call on the web (for example: http:\/\/192.168.1.134\/led?params=0) where the argument is 0 for GPIO0 LED off and 1 to turn it on.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSimple! The other LEDs show if the board is plugged in and what is going on with the instruments. However, you can display a lot more using a \u003ca href=\"http:\/\/www.switchdoc.com\/grove-128x64-i2c-oled-board-arduino-raspberry-pi\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGrove OLED display\u003c\/a\u003e. There is built in software support for this OLED display.\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-id=\"5379350\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe WeatherPlus Board\u003c\/h2\u003e\n\u003cp\u003eOurWeather contains the customizable WeatherPlus board.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"template asset\" data-id=\"5379350\"\u003eSwitchDoc Labs Custom Grove OLED Display\u003c\/h2\u003e\n\u003cp\u003eYou can put big numbers up on the display (and graphs too if you are clever!) and also show a lot of information at the same time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cimg class=\"fit\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/005\/379\/350\/057e0b3257ecb24eeab8a2abbbb6ae7a_original.JPG?w=680\u0026amp;fit=max\u0026amp;v=1455753014\u0026amp;auto=format\u0026amp;q=92\u0026amp;s=4be590735ba250651158a4e04f6a1b3c\" alt=\"Custom OLED Display for OurWeather\"\u003e\u003c\/h2\u003e"});window.BOLD.common.Shopify.saveVariant(3340452364318, { variant: {"id":3340452364318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0690-WTHRPLUS2-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WeatherPlus2 - All in One Weather Station Controller","public_title":null,"options":["Default Title"],"price":5995,"weight":57,"compare_at_price":7995,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728945","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 4, product_id: 229325864990, product_handle: "weatherplus-all-in-one-weather-station-controller", price: 5995, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("the-thunder-board-i2c-lightning-detector-grove-connectors", 425751642150, {"id":425751642150,"title":"The Thunder Board - I2C Lightning Detector - Grove Connectors","handle":"the-thunder-board-i2c-lightning-detector-grove-connectors","description":"\u003ch1\u003eThe Thunder Board - I2C Lightning Detector - Grove Connectors\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e.\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_7095_large.JPG?v=1512176908\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Thunder Board Grove I2C Lightning Detector for the Raspberry Pi and Arduino - is a programmable Lightning Sensor board that detects the presence and approach of potentially hazardous lightning activity in the vicinity and provides an estimation on the distance to the head of the storm. The embedded lightning algorithm checks the incoming signal pattern to reject the potential man-made disturbers and various noise sources.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/the-thunder-board-i2c-lightning-simulator\"\u003eCheck out how to test your setup without having a lightning storm!   The Lightning Simulator has been released.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_7253_medium.JPG?v=1512856198\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eHow the heck do we detect lightning?  You would think it would be pretty easy, but it turns out it is not.   It's not just like a giant spark.   Well, it is a giant spark, but there are lots of other things that make electrical noise that can be confused for lightning.  Your computer (even your Raspberry PI and Arduino!), your car, the motor in your refrigerator, your cell phone, your computer monitor, your AM\/FM radio and even your TV.  They all make electrical noise that can be confused with Lightning.\u003cbr\u003e\u003cbr\u003eThe Thunder Board is an I2C device and detects Lightning and provides a distance estimate to the “leading edge” of an incoming storm.\u003c\/p\u003e\n\u003cp\u003eIn addition to this board, SwitchDoc Labs has two full Lightning Detector Kits:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/raspberry-pi-iot-lightning-detector-kit\"\u003eThe Thunder Board Raspberry Pi IOT Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/arduino-iot-lightning-detector-kit\"\u003eThe Thunder Board Arduino IOT Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eUsage NOTES:\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNote#1: The maximum voltages on SDA\/SCL must be less than or equal to VCC. Applying 3.3V to VCC while connecting to the 5V SDA\/SCL pins on the Arduino violate this specification and will destroy the buffer chip on the ThunderBoard.   Make sure that yourI2C pins (SDA\/SCL)  match the voltage applied to the VCC pin.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote#2: The AS3935 Lightning detector chip used on the Thunder Board does not like anything else on the same I2C bus segment on the Raspberry Pi. This is a well known problem with the chip.\u003cbr\u003e\u003cbr\u003eIf you need to use it with other I2C devices (which is a common problem), then you need to include an I2C Mux in the system (as we do with GroveWeatherPi) and put the Thunder Board on it's own I2C Bus segment.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/i2c-4-channel-mux-extender-expander-board-grove-pin-headers-for-arduino-and-raspberry-pi%20\" target=\"_blank\"\u003ehttps:\/\/shop.switchdoc.com\/products\/i2c-4-channel-mux-extender-expander-board-grove-pin-headers-for-arduino-and-raspberry-pi \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eNew Tutorial on Thunder Board\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDLThunderBoard051718.pdf\" target=\"_blank\"\u003eThunderBoard I2C Lightning Detector Specification (New Version 1.3)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e- \u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_ThunderBoard_AS3935\" target=\"_blank\"\u003eRaspberry Pi Drivers\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e- \u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoard_AS3935\" target=\"_blank\"\u003eArduino Drivers\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e- \u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2022\/12\/AS3935_Datasheet_EN_v2-3.pdf\" target=\"_blank\"\u003eFull AS3935 Specification\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cimg class=\"alignright size-full wp-image-2091\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_images-8.jpeg?11845732319113434917\" alt=\"images-8\" width=\"275\" height=\"183\"\u003e\u003c\/h2\u003e\n\u003ch2\u003eFeatures and Benefits:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e- 2.4V - 5.5V operation\u003c\/li\u003e\n\u003cli\u003e- I2C Interface - 0x02 Address\u003c\/li\u003e\n\u003cli\u003e- Buffered I2C Interface\u003c\/li\u003e\n\u003cli\u003e- Grove Connectors - No Soldering Required\u003c\/li\u003e\n\u003cli\u003e- Lightning sensor warns of lightning storm activity within a radius of 40km\u003c\/li\u003e\n\u003cli\u003e- Distance estimation to the head of the storm down to 1km in 14 steps\u003c\/li\u003e\n\u003cli\u003e- Detects both cloud-to-ground and intra-cloud (cloud-to-cloud) flashes\u003c\/li\u003e\n\u003cli\u003eEmbedded man-made disturber rejection algorithm\u003c\/li\u003e\n\u003cli\u003e- Programmable detection levels enable threshold setting for optimal controls\u003c\/li\u003e\n\u003cli\u003e- I2C interface is used for control and register reading\u003c\/li\u003e\n\u003cli\u003e- Antenna Tuning to compensate variations of the external components\u003c\/li\u003e\n\u003cli\u003e- Power-down, listening, and active mode\u003c\/li\u003e\n\u003cli\u003e- Full Test Code Supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n \n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cimg class=\"size-medium wp-image-14153 alignleft\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_9623-copy-277x300.jpg?15385522236814513018\" alt=\"IMG_9623 copy\" width=\"277\" height=\"300\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLightning Detector 3D Printed Tower\u003c\/h2\u003e\n\u003cp\u003e]\u003cimg class=\"size-medium wp-image-13463\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_Figure21-300x184.png?8427498675635494516\" alt=\"GroveWeatherPi\" width=\"300\" height=\"184\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe lighting detector pylon is to move the very sensitive Thunder Board Lightning Detector away from the noisy electronics within the GroveWeatherPi. We noticed early on that we were getting a lot of spurious lightning detection from the device. Moving it about 30cm from the electronics in a separate pylon fixed that problem. If you don't want to print your own pylon, you can find this in store.switchdoc.com.\u003c\/p\u003e\n\u003cpre\u003eFollowing is the Lightning Detector Pylon openSCAD code:\n\n\/\/\n\/\/ WeatherPi Lightning Sensor Block Extension\n\/\/\n\/\/ SwitchDoc Labs 5\/18\/15\n\/\/\n\/\/\n\nmodule sensorPylon()\n{\n \n \/\/ tube\n \n difference()\n {\n union()\n {\n cylinder(120, r=12);\n \n \/\/ flanges\n \n translate([-15,-15,0])\n cube([30,30,2]);\n }\n \n translate([0,0,-10])\n cylinder(150, r=10.5);\n \n \/\/ screw holes\n translate([-12,-12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n translate([-12,12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n translate([12,12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n translate([12,-12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n }\n \n \n \n \n \n \n \n}\n\nmodule sensorBox()\n{\n \n difference()\n {\n translate([-16.5,-16.5,0])\n cube([43,43,33]);\n \n translate([-15,-15,-2])\n cube([40,40,32]);\n \n translate([-15.5,-15.5,-1])\n cube([41,41,3]);\n \n }\n \n \n}\n\nmodule sensorPlatform()\n{\n \n difference()\n {\n union()\n {\n translate([-17.95,-17.95,-1])\n cube([40.9,40.9,2]);\n \n translate([2.5,2.5,-5])\n #cylinder(5,r=10.4);\n }\n \n translate([2.5,2.5,-5])\n #cylinder(10,r=9.0); \n }\n \n \n}\n\n\/*\nsensorPylon();\n\ntranslate([0,0,180])\nsensorBox();\n\ntranslate([0,0,160])\nsensorPlatform();\n*\/\n\ntranslate([60,0,0])\nsensorPylon();\n\nrotate(180,[0,1,0])\n{\ntranslate([50,0,-33])\nsensorBox();\n\ntranslate([0,0,-1])\nsensorPlatform();\n}\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-19T21:21:49-07:00","created_at":"2017-12-01T17:00:07-08:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Break Out Boards,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":4495,"price_min":4495,"price_max":4495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":5779732103206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0240-THNDRBRD-DBST","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"The Thunder Board - I2C Lightning Detector - Grove Connectors","public_title":null,"options":["Default Title"],"price":4495,"weight":1,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728426","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3903.JPG?v=1512179297","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3904.JPG?v=1512179297","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9dff275ba44ea6c18803b900f047fcb7_e4314ef7-0df5-4428-a702-5d43e70875a1.jpg?v=1512179297","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_99bd9e98-df56-4d8b-8bdd-5dfcb77a9ffb.jpg?v=1512179297","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7095.JPG?v=1512179297","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_9bcef24b-98ed-4d92-8424-cce9726e14ce.png?v=1512179297","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/aa1d3cbe92d3f0ece337d38bf6d60225_15c847c4-d0ac-47f7-897e-18179ecd0144.png?v=1512179297"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3903.JPG?v=1512179297","options":["Title"],"media":[{"alt":null,"id":878600650796,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3903.JPG?v=1512179297"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3903.JPG?v=1512179297","width":1000},{"alt":null,"id":878600683564,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3904.JPG?v=1512179297"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3904.JPG?v=1512179297","width":1000},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":878596784172,"position":3,"preview_image":{"aspect_ratio":1.501,"height":853,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9dff275ba44ea6c18803b900f047fcb7_e4314ef7-0df5-4428-a702-5d43e70875a1.jpg?v=1512179297"},"aspect_ratio":1.501,"height":853,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9dff275ba44ea6c18803b900f047fcb7_e4314ef7-0df5-4428-a702-5d43e70875a1.jpg?v=1512179297","width":1280},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":878596751404,"position":4,"preview_image":{"aspect_ratio":0.925,"height":1156,"width":1069,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_99bd9e98-df56-4d8b-8bdd-5dfcb77a9ffb.jpg?v=1512179297"},"aspect_ratio":0.925,"height":1156,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_99bd9e98-df56-4d8b-8bdd-5dfcb77a9ffb.jpg?v=1512179297","width":1069},{"alt":null,"id":878600618028,"position":5,"preview_image":{"aspect_ratio":1.373,"height":746,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7095.JPG?v=1512179297"},"aspect_ratio":1.373,"height":746,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7095.JPG?v=1512179297","width":1024},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":878596816940,"position":6,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_9bcef24b-98ed-4d92-8424-cce9726e14ce.png?v=1512179297"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_9bcef24b-98ed-4d92-8424-cce9726e14ce.png?v=1512179297","width":1024},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":878596849708,"position":7,"preview_image":{"aspect_ratio":0.563,"height":1280,"width":720,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/aa1d3cbe92d3f0ece337d38bf6d60225_15c847c4-d0ac-47f7-897e-18179ecd0144.png?v=1512179297"},"aspect_ratio":0.563,"height":1280,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/aa1d3cbe92d3f0ece337d38bf6d60225_15c847c4-d0ac-47f7-897e-18179ecd0144.png?v=1512179297","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eThe Thunder Board - I2C Lightning Detector - Grove Connectors\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e.\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_7095_large.JPG?v=1512176908\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Thunder Board Grove I2C Lightning Detector for the Raspberry Pi and Arduino - is a programmable Lightning Sensor board that detects the presence and approach of potentially hazardous lightning activity in the vicinity and provides an estimation on the distance to the head of the storm. The embedded lightning algorithm checks the incoming signal pattern to reject the potential man-made disturbers and various noise sources.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/the-thunder-board-i2c-lightning-simulator\"\u003eCheck out how to test your setup without having a lightning storm!   The Lightning Simulator has been released.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_7253_medium.JPG?v=1512856198\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eHow the heck do we detect lightning?  You would think it would be pretty easy, but it turns out it is not.   It's not just like a giant spark.   Well, it is a giant spark, but there are lots of other things that make electrical noise that can be confused for lightning.  Your computer (even your Raspberry PI and Arduino!), your car, the motor in your refrigerator, your cell phone, your computer monitor, your AM\/FM radio and even your TV.  They all make electrical noise that can be confused with Lightning.\u003cbr\u003e\u003cbr\u003eThe Thunder Board is an I2C device and detects Lightning and provides a distance estimate to the “leading edge” of an incoming storm.\u003c\/p\u003e\n\u003cp\u003eIn addition to this board, SwitchDoc Labs has two full Lightning Detector Kits:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/raspberry-pi-iot-lightning-detector-kit\"\u003eThe Thunder Board Raspberry Pi IOT Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/arduino-iot-lightning-detector-kit\"\u003eThe Thunder Board Arduino IOT Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eUsage NOTES:\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNote#1: The maximum voltages on SDA\/SCL must be less than or equal to VCC. Applying 3.3V to VCC while connecting to the 5V SDA\/SCL pins on the Arduino violate this specification and will destroy the buffer chip on the ThunderBoard.   Make sure that yourI2C pins (SDA\/SCL)  match the voltage applied to the VCC pin.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote#2: The AS3935 Lightning detector chip used on the Thunder Board does not like anything else on the same I2C bus segment on the Raspberry Pi. This is a well known problem with the chip.\u003cbr\u003e\u003cbr\u003eIf you need to use it with other I2C devices (which is a common problem), then you need to include an I2C Mux in the system (as we do with GroveWeatherPi) and put the Thunder Board on it's own I2C Bus segment.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/i2c-4-channel-mux-extender-expander-board-grove-pin-headers-for-arduino-and-raspberry-pi%20\" target=\"_blank\"\u003ehttps:\/\/shop.switchdoc.com\/products\/i2c-4-channel-mux-extender-expander-board-grove-pin-headers-for-arduino-and-raspberry-pi \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eNew Tutorial on Thunder Board\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/05\/SDLThunderBoard051718.pdf\" target=\"_blank\"\u003eThunderBoard I2C Lightning Detector Specification (New Version 1.3)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e- \u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_ThunderBoard_AS3935\" target=\"_blank\"\u003eRaspberry Pi Drivers\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e- \u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoard_AS3935\" target=\"_blank\"\u003eArduino Drivers\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e- \u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2022\/12\/AS3935_Datasheet_EN_v2-3.pdf\" target=\"_blank\"\u003eFull AS3935 Specification\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cimg class=\"alignright size-full wp-image-2091\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_images-8.jpeg?11845732319113434917\" alt=\"images-8\" width=\"275\" height=\"183\"\u003e\u003c\/h2\u003e\n\u003ch2\u003eFeatures and Benefits:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e- 2.4V - 5.5V operation\u003c\/li\u003e\n\u003cli\u003e- I2C Interface - 0x02 Address\u003c\/li\u003e\n\u003cli\u003e- Buffered I2C Interface\u003c\/li\u003e\n\u003cli\u003e- Grove Connectors - No Soldering Required\u003c\/li\u003e\n\u003cli\u003e- Lightning sensor warns of lightning storm activity within a radius of 40km\u003c\/li\u003e\n\u003cli\u003e- Distance estimation to the head of the storm down to 1km in 14 steps\u003c\/li\u003e\n\u003cli\u003e- Detects both cloud-to-ground and intra-cloud (cloud-to-cloud) flashes\u003c\/li\u003e\n\u003cli\u003eEmbedded man-made disturber rejection algorithm\u003c\/li\u003e\n\u003cli\u003e- Programmable detection levels enable threshold setting for optimal controls\u003c\/li\u003e\n\u003cli\u003e- I2C interface is used for control and register reading\u003c\/li\u003e\n\u003cli\u003e- Antenna Tuning to compensate variations of the external components\u003c\/li\u003e\n\u003cli\u003e- Power-down, listening, and active mode\u003c\/li\u003e\n\u003cli\u003e- Full Test Code Supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n \n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cimg class=\"size-medium wp-image-14153 alignleft\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_9623-copy-277x300.jpg?15385522236814513018\" alt=\"IMG_9623 copy\" width=\"277\" height=\"300\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLightning Detector 3D Printed Tower\u003c\/h2\u003e\n\u003cp\u003e]\u003cimg class=\"size-medium wp-image-13463\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_Figure21-300x184.png?8427498675635494516\" alt=\"GroveWeatherPi\" width=\"300\" height=\"184\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe lighting detector pylon is to move the very sensitive Thunder Board Lightning Detector away from the noisy electronics within the GroveWeatherPi. We noticed early on that we were getting a lot of spurious lightning detection from the device. Moving it about 30cm from the electronics in a separate pylon fixed that problem. If you don't want to print your own pylon, you can find this in store.switchdoc.com.\u003c\/p\u003e\n\u003cpre\u003eFollowing is the Lightning Detector Pylon openSCAD code:\n\n\/\/\n\/\/ WeatherPi Lightning Sensor Block Extension\n\/\/\n\/\/ SwitchDoc Labs 5\/18\/15\n\/\/\n\/\/\n\nmodule sensorPylon()\n{\n \n \/\/ tube\n \n difference()\n {\n union()\n {\n cylinder(120, r=12);\n \n \/\/ flanges\n \n translate([-15,-15,0])\n cube([30,30,2]);\n }\n \n translate([0,0,-10])\n cylinder(150, r=10.5);\n \n \/\/ screw holes\n translate([-12,-12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n translate([-12,12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n translate([12,12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n translate([12,-12,-5]) \n #cylinder(h=10,r=2.0,$fs=6);\n \n }\n \n \n \n \n \n \n \n}\n\nmodule sensorBox()\n{\n \n difference()\n {\n translate([-16.5,-16.5,0])\n cube([43,43,33]);\n \n translate([-15,-15,-2])\n cube([40,40,32]);\n \n translate([-15.5,-15.5,-1])\n cube([41,41,3]);\n \n }\n \n \n}\n\nmodule sensorPlatform()\n{\n \n difference()\n {\n union()\n {\n translate([-17.95,-17.95,-1])\n cube([40.9,40.9,2]);\n \n translate([2.5,2.5,-5])\n #cylinder(5,r=10.4);\n }\n \n translate([2.5,2.5,-5])\n #cylinder(10,r=9.0); \n }\n \n \n}\n\n\/*\nsensorPylon();\n\ntranslate([0,0,180])\nsensorBox();\n\ntranslate([0,0,160])\nsensorPlatform();\n*\/\n\ntranslate([60,0,0])\nsensorPylon();\n\nrotate(180,[0,1,0])\n{\ntranslate([50,0,-33])\nsensorBox();\n\ntranslate([0,0,-1])\nsensorPlatform();\n}\n\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(5779732103206, { variant: {"id":5779732103206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0240-THNDRBRD-DBST","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"The Thunder Board - I2C Lightning Detector - Grove Connectors","public_title":null,"options":["Default Title"],"price":4495,"weight":1,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728426","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 425751642150, product_handle: "the-thunder-board-i2c-lightning-detector-grove-connectors", price: 4495, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("sht30-i2c-waterproof-temperature-and-humidity-sensor-with-grove", 3977084141612, {"id":3977084141612,"title":"SHT30 I2C Waterproof Temperature and Humidity Sensor with Grove","handle":"sht30-i2c-waterproof-temperature-and-humidity-sensor-with-grove","description":"\u003ch1\u003eSHT30 I2C Waterproof Temperature and Humidity Sensor with Grove\u003c\/h1\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eThe new Grove digital SHT30 humidity sensor series takes sensor technology to a new level. As the successor of the SHT2x series it is determined to set the next industry standard in humidity sensing. The SHT30 humidity sensor series consists of a low-cost version with the SHT30 humidity sensor. The SHT30 humidity sensor series combines multiple functions and various interfaces (I\u003csup\u003e2\u003c\/sup\u003eC, analog voltage output) with a applications-friendly, very wide operating voltage range (2.15 to 5.5 V). \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eThe SHT30 humidity sensor is available in both large and small volumes.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eTemperature Accuracy:   +\/- 0.3 C\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eHumidity Accuracy: +\/- 3 % RH\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eModel: SHT30 temperature and humidity sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e100% Grove Compatible\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWiring\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRed VCC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack GNG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eYellow SCL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGreen SDA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/08\/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital-971521.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSHT30 Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_SHT30\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHigh Reliability Python Raspberry Pi Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_SHT31\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-08-14T17:12:07-07:00","created_at":"2019-08-14T17:35:47-07:00","vendor":"SwitchDoc Labs","type":"Grove","tags":[],"price":1600,"price_min":1600,"price_max":1600,"available":true,"price_varies":false,"compare_at_price":1995,"compare_at_price_min":1995,"compare_at_price_max":1995,"compare_at_price_varies":false,"variants":[{"id":29603985293356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0028-SHT30GRCV-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SHT30 I2C Waterproof Temperature and Humidity Sensor with Grove","public_title":null,"options":["Default Title"],"price":1600,"weight":3,"compare_at_price":1995,"inventory_quantity":78,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234729102","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_9442.JPG?v=1565829354","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3923_2.JPG?v=1565829357","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/QQ_20190726171814.jpg?v=1565829361"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_9442.JPG?v=1565829354","options":["Title"],"media":[{"alt":null,"id":2730713186348,"position":1,"preview_image":{"aspect_ratio":1.187,"height":1879,"width":2231,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_9442.JPG?v=1565829354"},"aspect_ratio":1.187,"height":1879,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_9442.JPG?v=1565829354","width":2231},{"alt":null,"id":2730713219116,"position":2,"preview_image":{"aspect_ratio":0.756,"height":3223,"width":2437,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3923_2.JPG?v=1565829357"},"aspect_ratio":0.756,"height":3223,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3923_2.JPG?v=1565829357","width":2437},{"alt":null,"id":2730713251884,"position":3,"preview_image":{"aspect_ratio":1.778,"height":2160,"width":3840,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/QQ_20190726171814.jpg?v=1565829361"},"aspect_ratio":1.778,"height":2160,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/QQ_20190726171814.jpg?v=1565829361","width":3840}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eSHT30 I2C Waterproof Temperature and Humidity Sensor with Grove\u003c\/h1\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eThe new Grove digital SHT30 humidity sensor series takes sensor technology to a new level. As the successor of the SHT2x series it is determined to set the next industry standard in humidity sensing. The SHT30 humidity sensor series consists of a low-cost version with the SHT30 humidity sensor. The SHT30 humidity sensor series combines multiple functions and various interfaces (I\u003csup\u003e2\u003c\/sup\u003eC, analog voltage output) with a applications-friendly, very wide operating voltage range (2.15 to 5.5 V). \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eThe SHT30 humidity sensor is available in both large and small volumes.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eTemperature Accuracy:   +\/- 0.3 C\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eHumidity Accuracy: +\/- 3 % RH\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.47f87d4avJZYTC\"\u003eModel: SHT30 temperature and humidity sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e100% Grove Compatible\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003eWiring\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRed VCC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack GNG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eYellow SCL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGreen SDA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/08\/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital-971521.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSHT30 Specification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_SHT30\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHigh Reliability Python Raspberry Pi Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_SHT31\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(29603985293356, { variant: {"id":29603985293356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0028-SHT30GRCV-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SHT30 I2C Waterproof Temperature and Humidity Sensor with Grove","public_title":null,"options":["Default Title"],"price":1600,"weight":3,"compare_at_price":1995,"inventory_quantity":78,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234729102","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 78, product_id: 3977084141612, product_handle: "sht30-i2c-waterproof-temperature-and-humidity-sensor-with-grove", price: 1600, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-laser-pm2-5-air-quality-sensor-for-raspberry-pi-arduino-hm3301", 4521717399596, {"id":4521717399596,"title":"Grove - Laser PM2.5 Air Quality Sensor for Raspberry Pi \/ Arduino - HM3301","handle":"grove-laser-pm2-5-air-quality-sensor-for-raspberry-pi-arduino-hm3301","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"oaimY _1ntuX\"\u003eGrove - Laser PM2.5 Air Quality Sensor for Raspberry Pi \/ Arduino - HM3301\u003c\/h1\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReal-time \u0026amp; continuous detection of dust concentration in the air\u003c\/li\u003e\n\u003cli\u003eConverts to AQI \u003c\/li\u003e\n\u003cli\u003eHigh sensitivity on dust particles of 0.3 μm or greater\u003c\/li\u003e\n\u003cli\u003eBased on laser light scattering technology, readings are accurate, stable, and consistent\u003c\/li\u003e\n\u003cli\u003eLow noise and Ultra-low power consumption\u003c\/li\u003e\n\u003cli\u003eWorks with SkyWeather and Smart Garden System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Laser PM2.5 Sensor (HM3301) is a next generation of laser dust detection sensor, which is used for continuous and real-time detection of dust in the air.   It is an inexpensive, yet accurate, way of measuring air quality in terms of AQI,\u003c\/p\u003e\n\u003cp\u003eIt is very different from the older versions of dust detectors and Different from the pumping dust detection sensor, and uses a fan to drive air during sensing and the air flowing through the detection chamber is used as a test sample to perform real-time and continuous test on dust of different particle sizes in the air.\u003c\/p\u003e\n\u003cp\u003eThe HM-3301 Dust Sensor is based on the advanced Mie scattering light theory. When light passes through particles with quantity same as or larger than wavelength of the light, it will produce light scattering. The scattered light is concentrated and focused on a highly sensitive photodiode, which is then amplified and analyzed by the internal circuitry.   Using a specific mathematical model and algorithm you can obtain the count concentration and mass concentration of the dust particles.   Very nice.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2020\/02\/tutorial-air-quality-on-the-raspberry-pi-with-the-hm3301\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTutorial on Using Laser Dust Sensor on the Raspberry Pi is here\u003c\/a\u003e\u003c\/h3\u003e\n\u003cp\u003eThe HM3301 is composed  a fan, an infrared laser source, a condensing mirror, a photosensitive tube, a signal amplifying circuit and a signal sorting circuit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSDL has developed a Raspberry Pi Python Driver that actually works on 3B+ and 4B Raspberry Pis.   The SDL library also contains the information for converting the information from the HM3301 to the EPA standard AQI value.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"mceTemp\"\u003e \u003c\/div\u003e\n\u003cp\u003eUse the Pi2Grover board to connect to the Raspberry Pi\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/Seeed-Studio\/Seeed_PM2_5_sensor_HM3301\"\u003eArduino Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_HM3301\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Driver (which actually works!)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/02\/HM-33003600_V2.1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGrove Laser Dust Sensor DataSheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2020\/02\/tutorial-air-quality-on-the-raspberry-pi-with-the-hm3301\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTutorial on Using Laser Dust Sensor on the Raspberry Pi\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/Screen_Shot_2020-02-08_at_8.59.12_AM_480x480.png?v=1581272335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cdiv class=\"md-typeset__scrollwrap\"\u003e\u003c\/div\u003e","published_at":"2020-02-09T10:02:21-08:00","created_at":"2020-02-09T10:02:21-08:00","vendor":"SwitchDoc Labs","type":"Grove","tags":[],"price":6550,"price_min":6550,"price_max":6550,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32106076340268,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0275-LASERDUST-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grove - Laser PM2.5 Air Quality Sensor for Raspberry Pi \/ Arduino - HM3301","public_title":null,"options":["Default Title"],"price":6550,"weight":27,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995118_front.jpg?v=1581271532","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995117_perspective.jpg?v=1581271546","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5707.jpg?v=1581271546"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995118_front.jpg?v=1581271532","options":["Title"],"media":[{"alt":null,"id":6295011688492,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995118_front.jpg?v=1581271532"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995118_front.jpg?v=1581271532","width":1400},{"alt":null,"id":6295013392428,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995117_perspective.jpg?v=1581271546"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995117_perspective.jpg?v=1581271546","width":1400},{"alt":null,"id":6295011721260,"position":3,"preview_image":{"aspect_ratio":1.526,"height":703,"width":1073,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5707.jpg?v=1581271546"},"aspect_ratio":1.526,"height":703,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5707.jpg?v=1581271546","width":1073}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"oaimY _1ntuX\"\u003eGrove - Laser PM2.5 Air Quality Sensor for Raspberry Pi \/ Arduino - HM3301\u003c\/h1\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReal-time \u0026amp; continuous detection of dust concentration in the air\u003c\/li\u003e\n\u003cli\u003eConverts to AQI \u003c\/li\u003e\n\u003cli\u003eHigh sensitivity on dust particles of 0.3 μm or greater\u003c\/li\u003e\n\u003cli\u003eBased on laser light scattering technology, readings are accurate, stable, and consistent\u003c\/li\u003e\n\u003cli\u003eLow noise and Ultra-low power consumption\u003c\/li\u003e\n\u003cli\u003eWorks with SkyWeather and Smart Garden System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Laser PM2.5 Sensor (HM3301) is a next generation of laser dust detection sensor, which is used for continuous and real-time detection of dust in the air.   It is an inexpensive, yet accurate, way of measuring air quality in terms of AQI,\u003c\/p\u003e\n\u003cp\u003eIt is very different from the older versions of dust detectors and Different from the pumping dust detection sensor, and uses a fan to drive air during sensing and the air flowing through the detection chamber is used as a test sample to perform real-time and continuous test on dust of different particle sizes in the air.\u003c\/p\u003e\n\u003cp\u003eThe HM-3301 Dust Sensor is based on the advanced Mie scattering light theory. When light passes through particles with quantity same as or larger than wavelength of the light, it will produce light scattering. The scattered light is concentrated and focused on a highly sensitive photodiode, which is then amplified and analyzed by the internal circuitry.   Using a specific mathematical model and algorithm you can obtain the count concentration and mass concentration of the dust particles.   Very nice.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2020\/02\/tutorial-air-quality-on-the-raspberry-pi-with-the-hm3301\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTutorial on Using Laser Dust Sensor on the Raspberry Pi is here\u003c\/a\u003e\u003c\/h3\u003e\n\u003cp\u003eThe HM3301 is composed  a fan, an infrared laser source, a condensing mirror, a photosensitive tube, a signal amplifying circuit and a signal sorting circuit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSDL has developed a Raspberry Pi Python Driver that actually works on 3B+ and 4B Raspberry Pis.   The SDL library also contains the information for converting the information from the HM3301 to the EPA standard AQI value.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"mceTemp\"\u003e \u003c\/div\u003e\n\u003cp\u003eUse the Pi2Grover board to connect to the Raspberry Pi\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/Seeed-Studio\/Seeed_PM2_5_sensor_HM3301\"\u003eArduino Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_HM3301\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Driver (which actually works!)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/02\/HM-33003600_V2.1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGrove Laser Dust Sensor DataSheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2020\/02\/tutorial-air-quality-on-the-raspberry-pi-with-the-hm3301\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTutorial on Using Laser Dust Sensor on the Raspberry Pi\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/Screen_Shot_2020-02-08_at_8.59.12_AM_480x480.png?v=1581272335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cdiv class=\"md-typeset__scrollwrap\"\u003e\u003c\/div\u003e"});window.BOLD.common.Shopify.saveVariant(32106076340268, { variant: {"id":32106076340268,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0275-LASERDUST-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grove - Laser PM2.5 Air Quality Sensor for Raspberry Pi \/ Arduino - HM3301","public_title":null,"options":["Default Title"],"price":6550,"weight":27,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 4521717399596, product_handle: "grove-laser-pm2-5-air-quality-sensor-for-raspberry-pi-arduino-hm3301", price: 6550, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("ourweather-solar-power-extender-kit", 229359517726, {"id":229359517726,"title":"OurWeather Solar Power Extender Kit","handle":"ourweather-solar-power-extender-kit","description":"\u003ch1\u003eOurWeather Solar Power Extender Kit\u003c\/h1\u003e\n\u003cp\u003eThis package allows you to transform the OurWeather Complete Weather Kit to a Solar Powered Weather Station.\u003c\/p\u003e\n\u003cp\u003eNote: The version 019+ OurWeather software is the minimum level to support this extender kit. It is available in source code form below or by over the air update as shown in the OurWeather manual.\u003c\/p\u003e\n\u003cp\u003eNote: This kit does NOT include a LiPo battery due to shipping restrictions. \u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a battery that we use and recommend.\u003c\/a\u003e Any 3.7V LiPo battery will work.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"p1\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2019\/12\/tutorial-solar-power-selection-guide-for-maker-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eTutorial on Selecting a Solar Power System Here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGrove SunAirPlus (contains I2C sensing for reading Solar Power, Battery Power and Output Power)\u003c\/li\u003e\n\u003cli\u003eSolar Panel 330mA (3)\u003c\/li\u003e\n\u003cli\u003eJST-PH Extender for Solar Panel JST-PH 2 Plug\u003c\/li\u003e\n\u003cli\u003eUSB PowerControl V2\u003c\/li\u003e\n\u003cli\u003eUSB cable - A\/MicroB\u003c\/li\u003e\n\u003cli\u003eMulti Solar Panel Connector Board (no soldering needed!)\u003c\/li\u003e\n\u003cli\u003eF\/F Multiple Solar Connector Board to SunAirPlus Solar Connection\u003c\/li\u003e\n\u003cli\u003eOne Female to Female Jumper Wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2017\/03\/SolarExtenderKit.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAssembly Manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOurWeather Software (019+) Github\u003c\/a\u003e (Over the air update available - see \u003ca href=\"http:\/\/www.switchdoc.com\/OurWeather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOurWeather Manual\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003e\u003cstrong\u003eNote:   Using the AirQuality Extender and the Solar Power Extender in the same OurWeather Project\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are using the AirQuality Extender and the Solar Power Extender in the same OurWeather setup then you need to make a change to the ADC included in the AirQuality Extender Kit. Do the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have the Solar Power Extender Kit and the Air Quality Extender, you have a conflict in the I2C addresses being used by the Air Quality Extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe SAP (SunAirPlus) ADS1015 has a non-changable address of 0x48\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe WeatherPlus board ADS1115 has a non-changable address of 0x49 (this is for the weather vane)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"layoutArea\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"layoutArea\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"page\" title=\"Page 2\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe Grove ADC1115 in the Air \u003c\/strong\u003e\u003cstrong\u003eQuality kit has a default address of 0x48, which conflicts with the SAP board.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003ch3\u003e\u003cstrong\u003e---To Solve!---\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSolder a pin to the pinhole marked ADDR on the Grove ADS1115 board and then connect a jumper from ADDR to SDA (in the pin header row on the same board), power it back on and then the board now has the I2C address 0x4A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThen, in the OurWeather Software, in SDL_ESP8266_WeatherPlus.ino (the main file) change the following line:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdafruit_ADS1115 adsAirQuality(0x48);\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eto\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdafruit_ADS1115 adsAirQuality(0x4A);\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll devices will then work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e3D Printed 3 Panel Solar Bracket\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2017\/02\/new-solar-cell-3d-printed-bracket-on-thingverse\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTake a look at this posting.\u003c\/a\u003e This takes a long time to print, so we don't sell it on the store.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"admin-ajax.php-11.jpeg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_admin-ajax.php-11.jpeg?9937541730237756671\" alt=\"admin-ajax.php-11.jpeg\" width=\"400\" height=\"301\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"admin-ajax.php-12.jpeg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_admin-ajax.php-12.jpeg?11007201285120178739\" alt=\"admin-ajax.php-12.jpeg\" width=\"400\" height=\"300\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-19T21:24:09-07:00","created_at":"2017-10-19T21:24:10-07:00","vendor":"vendor-unknown","type":"Shop All,Weather,Grove,Solar,Arduino,ESP8266","tags":[],"price":8495,"price_min":8495,"price_max":8495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3341008437278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0021-OWSEK-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"OurWeather Solar Power Extender Kit","public_title":null,"options":["Default Title"],"price":8495,"weight":374,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/28dc08fee976c77a2b518f631b86fdcf.jpg?v=1508473450","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ded89d637094cdfc2682d1ed7acd2911.jpg?v=1508473450","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/343550c2cde328bda8bbf4876f390c17.jpg?v=1508473450","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d6c99040b6156df91f8275307b493612.jpg?v=1508473450","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c3e9bd7b792c449cc6b001c29c2848c6.jpg?v=1508473450"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/28dc08fee976c77a2b518f631b86fdcf.jpg?v=1508473450","options":["Title"],"media":[{"alt":"OurWeather Solar Power Extender Kit","id":828956999724,"position":1,"preview_image":{"aspect_ratio":0.796,"height":1184,"width":943,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/28dc08fee976c77a2b518f631b86fdcf.jpg?v=1508473450"},"aspect_ratio":0.796,"height":1184,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/28dc08fee976c77a2b518f631b86fdcf.jpg?v=1508473450","width":943},{"alt":"OurWeather Solar Power Extender Kit","id":828957065260,"position":2,"preview_image":{"aspect_ratio":1.327,"height":398,"width":528,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ded89d637094cdfc2682d1ed7acd2911.jpg?v=1508473450"},"aspect_ratio":1.327,"height":398,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ded89d637094cdfc2682d1ed7acd2911.jpg?v=1508473450","width":528},{"alt":"OurWeather Solar Power Extender Kit","id":828957130796,"position":3,"preview_image":{"aspect_ratio":1.333,"height":300,"width":400,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/343550c2cde328bda8bbf4876f390c17.jpg?v=1508473450"},"aspect_ratio":1.333,"height":300,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/343550c2cde328bda8bbf4876f390c17.jpg?v=1508473450","width":400},{"alt":"OurWeather Solar Power Extender Kit","id":828957196332,"position":4,"preview_image":{"aspect_ratio":1.329,"height":301,"width":400,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d6c99040b6156df91f8275307b493612.jpg?v=1508473450"},"aspect_ratio":1.329,"height":301,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d6c99040b6156df91f8275307b493612.jpg?v=1508473450","width":400},{"alt":"OurWeather Solar Power Extender Kit","id":828957261868,"position":5,"preview_image":{"aspect_ratio":1.333,"height":960,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c3e9bd7b792c449cc6b001c29c2848c6.jpg?v=1508473450"},"aspect_ratio":1.333,"height":960,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/c3e9bd7b792c449cc6b001c29c2848c6.jpg?v=1508473450","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eOurWeather Solar Power Extender Kit\u003c\/h1\u003e\n\u003cp\u003eThis package allows you to transform the OurWeather Complete Weather Kit to a Solar Powered Weather Station.\u003c\/p\u003e\n\u003cp\u003eNote: The version 019+ OurWeather software is the minimum level to support this extender kit. It is available in source code form below or by over the air update as shown in the OurWeather manual.\u003c\/p\u003e\n\u003cp\u003eNote: This kit does NOT include a LiPo battery due to shipping restrictions. \u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a battery that we use and recommend.\u003c\/a\u003e Any 3.7V LiPo battery will work.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"p1\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2019\/12\/tutorial-solar-power-selection-guide-for-maker-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eTutorial on Selecting a Solar Power System Here.\u003c\/span\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGrove SunAirPlus (contains I2C sensing for reading Solar Power, Battery Power and Output Power)\u003c\/li\u003e\n\u003cli\u003eSolar Panel 330mA (3)\u003c\/li\u003e\n\u003cli\u003eJST-PH Extender for Solar Panel JST-PH 2 Plug\u003c\/li\u003e\n\u003cli\u003eUSB PowerControl V2\u003c\/li\u003e\n\u003cli\u003eUSB cable - A\/MicroB\u003c\/li\u003e\n\u003cli\u003eMulti Solar Panel Connector Board (no soldering needed!)\u003c\/li\u003e\n\u003cli\u003eF\/F Multiple Solar Connector Board to SunAirPlus Solar Connection\u003c\/li\u003e\n\u003cli\u003eOne Female to Female Jumper Wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2017\/03\/SolarExtenderKit.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAssembly Manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOurWeather Software (019+) Github\u003c\/a\u003e (Over the air update available - see \u003ca href=\"http:\/\/www.switchdoc.com\/OurWeather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOurWeather Manual\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003e\u003cstrong\u003eNote:   Using the AirQuality Extender and the Solar Power Extender in the same OurWeather Project\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are using the AirQuality Extender and the Solar Power Extender in the same OurWeather setup then you need to make a change to the ADC included in the AirQuality Extender Kit. Do the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have the Solar Power Extender Kit and the Air Quality Extender, you have a conflict in the I2C addresses being used by the Air Quality Extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe SAP (SunAirPlus) ADS1015 has a non-changable address of 0x48\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe WeatherPlus board ADS1115 has a non-changable address of 0x49 (this is for the weather vane)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"layoutArea\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"layoutArea\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"page\" title=\"Page 2\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe Grove ADC1115 in the Air \u003c\/strong\u003e\u003cstrong\u003eQuality kit has a default address of 0x48, which conflicts with the SAP board.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003ch3\u003e\u003cstrong\u003e---To Solve!---\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSolder a pin to the pinhole marked ADDR on the Grove ADS1115 board and then connect a jumper from ADDR to SDA (in the pin header row on the same board), power it back on and then the board now has the I2C address 0x4A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThen, in the OurWeather Software, in SDL_ESP8266_WeatherPlus.ino (the main file) change the following line:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdafruit_ADS1115 adsAirQuality(0x48);\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eto\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdafruit_ADS1115 adsAirQuality(0x4A);\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll devices will then work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e3D Printed 3 Panel Solar Bracket\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2017\/02\/new-solar-cell-3d-printed-bracket-on-thingverse\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTake a look at this posting.\u003c\/a\u003e This takes a long time to print, so we don't sell it on the store.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"admin-ajax.php-11.jpeg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_admin-ajax.php-11.jpeg?9937541730237756671\" alt=\"admin-ajax.php-11.jpeg\" width=\"400\" height=\"301\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"admin-ajax.php-12.jpeg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_admin-ajax.php-12.jpeg?11007201285120178739\" alt=\"admin-ajax.php-12.jpeg\" width=\"400\" height=\"300\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(3341008437278, { variant: {"id":3341008437278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0021-OWSEK-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"OurWeather Solar Power Extender Kit","public_title":null,"options":["Default Title"],"price":8495,"weight":374,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229359517726, product_handle: "ourweather-solar-power-extender-kit", price: 8495, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("the-thunder-board-i2c-lightning-simulator", 434672173094, {"id":434672173094,"title":"Thunder Board Lightning Simulator","handle":"the-thunder-board-i2c-lightning-simulator","description":"\u003ch1\u003eThunder Board Lightning Simulator\u003c\/h1\u003e\n\u003cp\u003eDebugging Lightning Detectors has always been a problem.  You have to wait for a lightning storm.   To fix this problem, we have now developed a Lighting Simulator product.  \u003c\/p\u003e\n\u003cp\u003eThis board is a companion to the SwitchDoc Labs Thunder Board Lighting Detector.   This fully assembled and programmed product will generate simulated lighting on cue to test your lightning detection setup.\u003c\/p\u003e\n\u003cp\u003eWe use it regularly in house and are pleased to release this as a product.\u003c\/p\u003e\n\u003cp\u003eWe have just posted the software for the Thunder Board Lightning Simulator.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes with a fully\u003cstrong\u003e assembled and programmed\u003c\/strong\u003e shield plugged into an Arduino Uno R3. Works out of the box.  USB to USB - Type A Cable for programming and power.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_2213_large.JPG?v=1512856198\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eHere is what it does:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFar Lightning Strike (push Far Stk Button)\u003c\/li\u003e\n\u003cli\u003eMid-range Lightning Strike (push Mid Stk Button)\u003c\/li\u003e\n\u003cli\u003eClose Lightning Strike (push Close Stk Button)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eand three other lightning test modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlow Timed Lightning Strike Mode - Every 5 minutes (push Far Stk and Mid Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eFast Timed Lightning Strike Mode - Every 15 seconds (push Mid Stk and Close Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eRandom Timed Lightning Strike Mode - From 30 seconds to 30 minutes (push all three buttons together)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou terminate the Time Strike modes by pushing any single button or by performing a power off or reset.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote:   This lighting simulator is not very strong and might have to be held close to the Thunder Board Lightning Detector especially in the presence of cell phones, computers and monitors.   If you look at the Thunder Board Lightning Detector, you can see when the Lightning board picks up lightning when the Interrupt White LED blinks or lights up.\u003c\/p\u003e\n\u003cp\u003eIf you are having detection problems, move your whole test setup away from RFI (Radio Frequency Interference) sources.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eNew Tutorial on Thunder Board\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-19T21:21:49-07:00","created_at":"2017-12-09T13:14:16-08:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Break Out Boards,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":7495,"price_min":7495,"price_max":7495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":5856476823590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0241-THNDRTST-DBST","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Thunder Board Lightning Simulator","public_title":null,"options":["Default Title"],"price":7495,"weight":68,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728433","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2213.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2398.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/548f17b413ab2f23b60384f0d61f43fc_original.JPG?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/818b9f04766632a87ea6f0755faeeec1_original.jpg?v=1512856198","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_e1b221d5-1f0e-4bd8-838e-c915cc4450aa.jpg?v=1512856198","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_429ef232-ef28-4d75-a067-6ab974530c49.png?v=1512856198"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198","options":["Title"],"media":[{"alt":null,"id":883384713260,"position":1,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7253.JPG?v=1512856198","width":3024},{"alt":null,"id":883384647724,"position":2,"preview_image":{"aspect_ratio":1.412,"height":2082,"width":2939,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2213.JPG?v=1512856198"},"aspect_ratio":1.412,"height":2082,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2213.JPG?v=1512856198","width":2939},{"alt":null,"id":883384680492,"position":3,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2398.JPG?v=1512856198"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2398.JPG?v=1512856198","width":3024},{"alt":null,"id":883385204780,"position":4,"preview_image":{"aspect_ratio":1.0,"height":680,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/548f17b413ab2f23b60384f0d61f43fc_original.JPG?v=1512856198"},"aspect_ratio":1.0,"height":680,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/548f17b413ab2f23b60384f0d61f43fc_original.JPG?v=1512856198","width":680},{"alt":null,"id":883385237548,"position":5,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/818b9f04766632a87ea6f0755faeeec1_original.jpg?v=1512856198"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/818b9f04766632a87ea6f0755faeeec1_original.jpg?v=1512856198","width":500},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":883381698604,"position":6,"preview_image":{"aspect_ratio":0.925,"height":1156,"width":1069,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_e1b221d5-1f0e-4bd8-838e-c915cc4450aa.jpg?v=1512856198"},"aspect_ratio":0.925,"height":1156,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d859edbcc69fd393a97109a7a7390e95_e1b221d5-1f0e-4bd8-838e-c915cc4450aa.jpg?v=1512856198","width":1069},{"alt":"I2C Lightning Detector - Grove Connectors - MOD-1016G","id":883381731372,"position":7,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_429ef232-ef28-4d75-a067-6ab974530c49.png?v=1512856198"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5598ffeb64f9ea765b6304069c933e1a_429ef232-ef28-4d75-a067-6ab974530c49.png?v=1512856198","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eThunder Board Lightning Simulator\u003c\/h1\u003e\n\u003cp\u003eDebugging Lightning Detectors has always been a problem.  You have to wait for a lightning storm.   To fix this problem, we have now developed a Lighting Simulator product.  \u003c\/p\u003e\n\u003cp\u003eThis board is a companion to the SwitchDoc Labs Thunder Board Lighting Detector.   This fully assembled and programmed product will generate simulated lighting on cue to test your lightning detection setup.\u003c\/p\u003e\n\u003cp\u003eWe use it regularly in house and are pleased to release this as a product.\u003c\/p\u003e\n\u003cp\u003eWe have just posted the software for the Thunder Board Lightning Simulator.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoardSimulator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes with a fully\u003cstrong\u003e assembled and programmed\u003c\/strong\u003e shield plugged into an Arduino Uno R3. Works out of the box.  USB to USB - Type A Cable for programming and power.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_2213_large.JPG?v=1512856198\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eHere is what it does:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFar Lightning Strike (push Far Stk Button)\u003c\/li\u003e\n\u003cli\u003eMid-range Lightning Strike (push Mid Stk Button)\u003c\/li\u003e\n\u003cli\u003eClose Lightning Strike (push Close Stk Button)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eand three other lightning test modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlow Timed Lightning Strike Mode - Every 5 minutes (push Far Stk and Mid Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eFast Timed Lightning Strike Mode - Every 15 seconds (push Mid Stk and Close Stk buttons together)\u003c\/li\u003e\n\u003cli\u003eRandom Timed Lightning Strike Mode - From 30 seconds to 30 minutes (push all three buttons together)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou terminate the Time Strike modes by pushing any single button or by performing a power off or reset.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote:   This lighting simulator is not very strong and might have to be held close to the Thunder Board Lightning Detector especially in the presence of cell phones, computers and monitors.   If you look at the Thunder Board Lightning Detector, you can see when the Lightning board picks up lightning when the Interrupt White LED blinks or lights up.\u003c\/p\u003e\n\u003cp\u003eIf you are having detection problems, move your whole test setup away from RFI (Radio Frequency Interference) sources.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eNew Tutorial on Thunder Board\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(5856476823590, { variant: {"id":5856476823590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0241-THNDRTST-DBST","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Thunder Board Lightning Simulator","public_title":null,"options":["Default Title"],"price":7495,"weight":68,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728433","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 15, product_id: 434672173094, product_handle: "the-thunder-board-i2c-lightning-simulator", price: 7495, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-uv-sensor", 229330911262, {"id":229330911262,"title":"Grove UV Sensor","handle":"grove-uv-sensor","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove – UV Sensor is used for detecting the intensity of incident ultraviolet(UV) radiation. The sensor is based on the GUVA-S12D which has a wide spectral range of 200nm-400nm. The module connects to a Grove Analog Connecter and outputs a voltage which varies with the UV intensity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eUV Transparent Fused Quartz Window Available\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eIf you are putting a Grove UV sensor in a weather proof container, you should use a far-UV transparent Silica Quartz plate for the window over the sensor.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eHowever, remember most plastics and glass are basically impervious to UV radiation (that’s why your Photogray sun glasses don’t work well in a car) so you need to use a special plastic or what I prefer, Silica Quartz. These Quartz JGS1 windows will let the UV through.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/double-side-polished-far-uv-fused-silica-quartz-glass-sheets-plate-30-30-1mm\/\" target=\"_blank\"\u003e\u003cspan class=\"s1\"\u003ehttps:\/\/store.switchdoc.com\/double-side-polished-far-uv-fused-silica-quartz-glass-sheets-plate-30-30-1mm\/\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch2 class=\"p2\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eHigh stability\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eGood Sensitivity\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eLow power consumption\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eSchottky type photodiode sensor\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eWide response range\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eGrove Interface\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 class=\"p4\"\u003e\u003cstrong\u003e\u003cspan class=\"s1\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003ctable class=\"t1\" style=\"width: 1252.3px;\" cellspacing=\"0\" cellpadding=\"0\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eItem\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eMin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eTypical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eMax\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eUnit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e3.0\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e5.0\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e5.1\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eVDC\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eCurrent\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e0.31\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003emA\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003emV\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eResponse wavelength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e240\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e~\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e370\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003enm\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e-30\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e~\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e85\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e℃\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003ch2 class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eUsage\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eUV sensors are used in many different applications. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe UV Sensor works by measuring sunlight intensity in the UV range. In this sensor the UV index and resulting voltage are in a linear relationship.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eillumination intensity = 307 * Vsig\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003ewhere: \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eVsig is the value of voltage measured from the SIG pin of the Grove interface in VOlts.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eillumination intensity unit: mW\/m\u003c\/span\u003e\u003cspan class=\"s5\"\u003e\u003csup\u003e2\u003c\/sup\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e for the combination strength of UV light with wavelength range: 240nm~370nm\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eNote: To calculate the UV index value, please refer to \u003ca href=\"http:\/\/www2.epa.gov\/sunwise\/uv-index\"\u003e\u003cspan class=\"s6\"\u003ehttp:\/\/www2.epa.gov\/sunwise\/uv-index\u003c\/span\u003e\u003c\/a\u003e. The EPA standard UV index can be estimated by:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eUV Index = illumination intensity \/ 200\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch2 class=\"p6\"\u003e\u003cspan class=\"s7\"\u003e\u003cstrong\u003eExample for Arduino\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eConnect it to an Grove Analog Port (A0) on the Grove Sheild\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003ePlug the Grove - Base Shield into Arduino\/Seeeduino and connect them to PC using a USB cable\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cpre\u003e \/\/ modified by Victor \r\n \/\/ to calculate UV index directly\r\nvoid setup(){\r\n \r\n Serial.begin(9600);\r\n}\r\n \r\nvoid loop()\r\n{ \r\n int sensorValue;\r\n long sum=0;\r\n for(int i=0;i\u0026lt;1024;i++)\/\/ accumulate readings for 1024 times\r\n { \r\n sensorValue=analogRead(A0);\r\n sum=sensorValue+sum;\r\n delay(2);\r\n } \r\n long meanVal = sum\/1024; \/\/ get mean value\r\n Serial.print(\"The current UV index is:\");\r\n Serial.print((meanVal*1000\/4.3-83)\/21);\/\/ get a detailed calculating expression for UV index in schematic files. \r\n Serial.print(\"\\n\");\r\n delay(20); \r\n \r\n}\r\n\u003c\/pre\u003e","published_at":"2017-10-19T21:17:50-07:00","created_at":"2017-10-19T21:17:50-07:00","vendor":"vendor-unknown","type":"Shop All,Weather,Grove,Solar,Sensors,Raspberry Pi,Arduino,ESP8266","tags":[],"price":795,"price_min":795,"price_max":795,"available":true,"price_varies":false,"compare_at_price":1695,"compare_at_price_min":1695,"compare_at_price_max":1695,"compare_at_price_varies":false,"variants":[{"id":3340514328606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0093-GRVUVS-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove UV Sensor","public_title":null,"options":["Default Title"],"price":795,"weight":142,"compare_at_price":1695,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3960d17b4ec7e7a33705928c8bd8c537.jpg?v=1508473071","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/70965b580957e1150ef3cf9c210dd550.jpg?v=1508473071","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/58fdf3a77712ea7b901fa1b44c21c2a3.jpg?v=1508473071"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3960d17b4ec7e7a33705928c8bd8c537.jpg?v=1508473071","options":["Title"],"media":[{"alt":"Grove UV Sensor","id":828906471468,"position":1,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3960d17b4ec7e7a33705928c8bd8c537.jpg?v=1508473071"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3960d17b4ec7e7a33705928c8bd8c537.jpg?v=1508473071","width":700},{"alt":"Grove UV Sensor","id":828906504236,"position":2,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/70965b580957e1150ef3cf9c210dd550.jpg?v=1508473071"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/70965b580957e1150ef3cf9c210dd550.jpg?v=1508473071","width":700},{"alt":"Grove UV Sensor","id":828906537004,"position":3,"preview_image":{"aspect_ratio":1.339,"height":469,"width":628,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/58fdf3a77712ea7b901fa1b44c21c2a3.jpg?v=1508473071"},"aspect_ratio":1.339,"height":469,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/58fdf3a77712ea7b901fa1b44c21c2a3.jpg?v=1508473071","width":628}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe Grove – UV Sensor is used for detecting the intensity of incident ultraviolet(UV) radiation. The sensor is based on the GUVA-S12D which has a wide spectral range of 200nm-400nm. The module connects to a Grove Analog Connecter and outputs a voltage which varies with the UV intensity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch2 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eUV Transparent Fused Quartz Window Available\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eIf you are putting a Grove UV sensor in a weather proof container, you should use a far-UV transparent Silica Quartz plate for the window over the sensor.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eHowever, remember most plastics and glass are basically impervious to UV radiation (that’s why your Photogray sun glasses don’t work well in a car) so you need to use a special plastic or what I prefer, Silica Quartz. These Quartz JGS1 windows will let the UV through.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/double-side-polished-far-uv-fused-silica-quartz-glass-sheets-plate-30-30-1mm\/\" target=\"_blank\"\u003e\u003cspan class=\"s1\"\u003ehttps:\/\/store.switchdoc.com\/double-side-polished-far-uv-fused-silica-quartz-glass-sheets-plate-30-30-1mm\/\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch2 class=\"p2\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eHigh stability\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eGood Sensitivity\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eLow power consumption\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eSchottky type photodiode sensor\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eWide response range\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eGrove Interface\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 class=\"p4\"\u003e\u003cstrong\u003e\u003cspan class=\"s1\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003ctable class=\"t1\" style=\"width: 1252.3px;\" cellspacing=\"0\" cellpadding=\"0\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eItem\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eMin\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eTypical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eMax\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eUnit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e3.0\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e5.0\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e5.1\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eVDC\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eCurrent\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e0.31\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003emA\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003emV\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eResponse wavelength\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e240\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e~\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e370\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003enm\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd class=\"td1\" valign=\"middle\"\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td2\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e-30\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td3\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e~\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td4\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e85\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd class=\"td5\" valign=\"middle\"\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e℃\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003ch2 class=\"p4\"\u003e\u003cspan class=\"s1\"\u003eUsage\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eUV sensors are used in many different applications. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThe UV Sensor works by measuring sunlight intensity in the UV range. In this sensor the UV index and resulting voltage are in a linear relationship.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p5\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003eillumination intensity = 307 * Vsig\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003ewhere: \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eVsig is the value of voltage measured from the SIG pin of the Grove interface in VOlts.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eillumination intensity unit: mW\/m\u003c\/span\u003e\u003cspan class=\"s5\"\u003e\u003csup\u003e2\u003c\/sup\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e for the combination strength of UV light with wavelength range: 240nm~370nm\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eNote: To calculate the UV index value, please refer to \u003ca href=\"http:\/\/www2.epa.gov\/sunwise\/uv-index\"\u003e\u003cspan class=\"s6\"\u003ehttp:\/\/www2.epa.gov\/sunwise\/uv-index\u003c\/span\u003e\u003c\/a\u003e. The EPA standard UV index can be estimated by:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eUV Index = illumination intensity \/ 200\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch2 class=\"p6\"\u003e\u003cspan class=\"s7\"\u003e\u003cstrong\u003eExample for Arduino\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cul class=\"ul1\"\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003eConnect it to an Grove Analog Port (A0) on the Grove Sheild\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s1\"\u003ePlug the Grove - Base Shield into Arduino\/Seeeduino and connect them to PC using a USB cable\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cpre\u003e \/\/ modified by Victor \r\n \/\/ to calculate UV index directly\r\nvoid setup(){\r\n \r\n Serial.begin(9600);\r\n}\r\n \r\nvoid loop()\r\n{ \r\n int sensorValue;\r\n long sum=0;\r\n for(int i=0;i\u0026lt;1024;i++)\/\/ accumulate readings for 1024 times\r\n { \r\n sensorValue=analogRead(A0);\r\n sum=sensorValue+sum;\r\n delay(2);\r\n } \r\n long meanVal = sum\/1024; \/\/ get mean value\r\n Serial.print(\"The current UV index is:\");\r\n Serial.print((meanVal*1000\/4.3-83)\/21);\/\/ get a detailed calculating expression for UV index in schematic files. \r\n Serial.print(\"\\n\");\r\n delay(20); \r\n \r\n}\r\n\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(3340514328606, { variant: {"id":3340514328606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0093-GRVUVS-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Grove UV Sensor","public_title":null,"options":["Default Title"],"price":795,"weight":142,"compare_at_price":1695,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 1, product_id: 229330911262, product_handle: "grove-uv-sensor", price: 795, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("wireless-weatherrack2", 5451443208359, {"id":5451443208359,"title":"WeatherSense Wireless WeatherRack2","handle":"wireless-weatherrack2","description":"\u003ch1\u003e\u003cspan\u003eWeatherSense Wireless WeatherRack2\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eSwitchDoc Labs has always been about bringing out new types of sensors and projects to makers all over the world.   \u003c\/span\u003e\u003cspan class=\"bold\"\u003eWe are now proud to announce our first custom built set of WeatherSense 433Mhz Wireless Weather Sensors  for you to build your own weather station using Raspberry Pi's, Arduino or ESP32 based computers.\u003c\/span\u003e\u003cspan\u003e  Your pick!   We are using some really advanced technology and software such as using a Software Defined Radio (SDR) in the Raspberry Pi kits to get really good quality data from the wireless sensors.  Fully WeatherSense compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWeatherSense WeatherRack2 professional wireless (433MHz) weather station features an easy-to-install 7-in-1 integrated sensor array (temperature, humidity, rainfall, wind speed, wind direction, UV, light). Suitable both for home and commercial applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eWireless Indoo\u003c\/span\u003e\u003cspan\u003er temperature and humidity\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWireless outdoor temperature and humidity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWind Speed \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWind Direction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolar Radiation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRainfall data \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUV\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes an indoor temperature and humidity sensor (\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/wireless-inside-temperature-and-humidity-sensor-f007th\" target=\"_blank\"\u003ethe SwitchDoc Labs F016TH\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch1\u003eDownloads\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/04\/WeatherRack2Installation1.3.pdf\" target=\"_blank\"\u003eWeatherRack2 Technical Specification and Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/rtl_433\"\u003ertl_433 Open Source Software supporting WeatherRack2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherRack2\"\u003eWeatherRack2 Raspberry P Python Test and Example Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherRack2\" target=\"_blank\"\u003eArduino WeatherRack2 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_WeatherRack2\" target=\"_blank\"\u003eESP32 WeatherRack2 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/11\/ArduinoWeatherRack2Kit-1.1.pdf\" target=\"_blank\"\u003eArduino Kit Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/11\/RPiWeatherRack2Kit-1.1.pdf\" target=\"_blank\"\u003eRaspberry Pi Kit Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003eSoftware Defined Radio\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\"\u003eWe sell a compatible SDR and Antenna here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eON Amazon, you can buy a compatible \u003cmeta charset=\"utf-8\"\u003e SDR:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/3kDZtlv\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/3kDZtlv\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\"\u003e\u003c\/a\u003e Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/WeatherRack2Specs_480x480.png?v=1604885121\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IndoorSpecs_480x480.png?v=1604885043\"\u003e\u003c\/p\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003eExample Results\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003eHere is an example of results coming in from the WeatherRack2 from the PythonTest Software:\u003c\/div\u003e\n\u003cpre\u003epi@SwitchDocLabs:~\/SDL_Pi_WeatherRack2 $ sudo python3 readWeatherSensors.py\nStarting Wireless Read\u003cbr\u003e\n{\"time\" : \"2020-11-22 06:40:15\", \"model\" : \"SwitchDoc Labs FT020T AIO\", \"device\" : 12, \"id\" : 0, \"batterylow\" : 0, \"avewindspeed\" : 2, \"gustwindspeed\" : 3, \"winddirection\" : 18, \"cumulativerain\" : 180, \"temperature\" : 1011, \"humidity\" : 27, \"light\" : 1432, \"uv\" : 4, \"mic\" : \"CRC\"}\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/pre\u003e\n\u003ch2\u003eRaw Data Description\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003etime: Time of Message Reception\u003c\/li\u003e\n\u003cli\u003emodel: SwitchDoc Labs FT020T AIO\u003c\/li\u003e\n\u003cli\u003edevice: Serial Number of the sensor - changed on powerup but can be used to discriminate from other similar sensors in the area\u003c\/li\u003e\n\u003cli\u003ebatterylow: 0 if battery good, 1 if battery is getting low\u003c\/li\u003e\n\u003cli\u003eavewindspeed: Average Wind Speed in m\/s *10\u003c\/li\u003e\n\u003cli\u003egustwindspeed: Last Gust Speed in m\/s *10\u003c\/li\u003e\n\u003cli\u003ewinddirection: Wind Direction in degrees from 0-359.\u003c\/li\u003e\n\u003cli\u003ecumulativerain: Total rain since last reset or power off. in mm.*10\u003c\/li\u003e\n\u003cli\u003etemperature: outside temperature in F with 400 offset and *10 T = (value-400)\/10.0\u003c\/li\u003e\n\u003cli\u003ehumidity: Relative Humidity in %. light:\u003c\/li\u003e\n\u003cli\u003eVisible Sunlight in lux. uv: UV Index * 10 (meaning an uv index of 0.8 is in the example message above)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTemperature and Humidity Error Conditions\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf the humidity level in Hex is 0xFF, this is an error\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf the temperature level in Hex is 0x0FFF, this is an error\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eClearly those are errors. Here are three more Errors from the temperature:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eValid range for temperature: (with 400 offset added)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-40.0F to 140.0F\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInvalid value: 0X7FA\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBelow minimum: 0X7FC\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAbove maximum: 0X7FD\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eValid Range for Humidity 10% -100%\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eErrors for Humidity:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInvalid humidity: 0x7A\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eExamples:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003eFrom the Arduino Driver:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/5d47d3ae5623ba4b597fd8240dda8f7c_original_480x480.png?v=1604085271\"\u003e\u003c\/p\u003e","published_at":"2020-07-09T07:29:03-07:00","created_at":"2020-07-09T07:29:02-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":17000,"price_min":17000,"price_max":17000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35139213033639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0013-WEATHERRACK2-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"WeatherSense Wireless WeatherRack2","public_title":null,"options":["Default Title"],"price":17000,"weight":907,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728969","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8f9bcb2fb5f8b42cba9ca8b4d5fdbac9_original.jpg?v=1604085361","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a84b26ed1b705f79b41ea4d9c826ad5_original.jpg?v=1604085361","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/825d316be2740be0d2f738c4de76a128_original.jpg?v=1604085361","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2eabc725896b379d7405e527e4987706_original.png?v=1604085361","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0bd850b61b827d620ccfe0d4790a454c_original.png?v=1604085361","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5d47d3ae5623ba4b597fd8240dda8f7c_original.png?v=1604085361","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/20c5849ddea0c4b3be369947b16a2fab_original.png?v=1604085361","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b3cb23890f46c6f91725701cd50d4586_original.jpg?v=1604085355","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b48c0749e68c3f385e739cc0e85b440b_original.png?v=1604085355"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8f9bcb2fb5f8b42cba9ca8b4d5fdbac9_original.jpg?v=1604085361","options":["Title"],"media":[{"alt":null,"id":13490759663783,"position":1,"preview_image":{"aspect_ratio":1.281,"height":531,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8f9bcb2fb5f8b42cba9ca8b4d5fdbac9_original.jpg?v=1604085361"},"aspect_ratio":1.281,"height":531,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8f9bcb2fb5f8b42cba9ca8b4d5fdbac9_original.jpg?v=1604085361","width":680},{"alt":null,"id":13490759598247,"position":2,"preview_image":{"aspect_ratio":1.333,"height":510,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a84b26ed1b705f79b41ea4d9c826ad5_original.jpg?v=1604085361"},"aspect_ratio":1.333,"height":510,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a84b26ed1b705f79b41ea4d9c826ad5_original.jpg?v=1604085361","width":680},{"alt":null,"id":13490759729319,"position":3,"preview_image":{"aspect_ratio":0.75,"height":907,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/825d316be2740be0d2f738c4de76a128_original.jpg?v=1604085361"},"aspect_ratio":0.75,"height":907,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/825d316be2740be0d2f738c4de76a128_original.jpg?v=1604085361","width":680},{"alt":null,"id":13490801934503,"position":4,"preview_image":{"aspect_ratio":1.414,"height":481,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2eabc725896b379d7405e527e4987706_original.png?v=1604085361"},"aspect_ratio":1.414,"height":481,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2eabc725896b379d7405e527e4987706_original.png?v=1604085361","width":680},{"alt":null,"id":13490759565479,"position":5,"preview_image":{"aspect_ratio":1.414,"height":481,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0bd850b61b827d620ccfe0d4790a454c_original.png?v=1604085361"},"aspect_ratio":1.414,"height":481,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/0bd850b61b827d620ccfe0d4790a454c_original.png?v=1604085361","width":680},{"alt":null,"id":13490759631015,"position":6,"preview_image":{"aspect_ratio":0.677,"height":1004,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5d47d3ae5623ba4b597fd8240dda8f7c_original.png?v=1604085361"},"aspect_ratio":0.677,"height":1004,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5d47d3ae5623ba4b597fd8240dda8f7c_original.png?v=1604085361","width":680},{"alt":null,"id":13490759696551,"position":7,"preview_image":{"aspect_ratio":2.429,"height":280,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/20c5849ddea0c4b3be369947b16a2fab_original.png?v=1604085361"},"aspect_ratio":2.429,"height":280,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/20c5849ddea0c4b3be369947b16a2fab_original.png?v=1604085361","width":680},{"alt":null,"id":13490759762087,"position":8,"preview_image":{"aspect_ratio":0.75,"height":907,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b3cb23890f46c6f91725701cd50d4586_original.jpg?v=1604085355"},"aspect_ratio":0.75,"height":907,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b3cb23890f46c6f91725701cd50d4586_original.jpg?v=1604085355","width":680},{"alt":null,"id":13490759794855,"position":9,"preview_image":{"aspect_ratio":1.181,"height":576,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b48c0749e68c3f385e739cc0e85b440b_original.png?v=1604085355"},"aspect_ratio":1.181,"height":576,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b48c0749e68c3f385e739cc0e85b440b_original.png?v=1604085355","width":680}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e\u003cspan\u003eWeatherSense Wireless WeatherRack2\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eSwitchDoc Labs has always been about bringing out new types of sensors and projects to makers all over the world.   \u003c\/span\u003e\u003cspan class=\"bold\"\u003eWe are now proud to announce our first custom built set of WeatherSense 433Mhz Wireless Weather Sensors  for you to build your own weather station using Raspberry Pi's, Arduino or ESP32 based computers.\u003c\/span\u003e\u003cspan\u003e  Your pick!   We are using some really advanced technology and software such as using a Software Defined Radio (SDR) in the Raspberry Pi kits to get really good quality data from the wireless sensors.  Fully WeatherSense compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWeatherSense WeatherRack2 professional wireless (433MHz) weather station features an easy-to-install 7-in-1 integrated sensor array (temperature, humidity, rainfall, wind speed, wind direction, UV, light). Suitable both for home and commercial applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eWireless Indoo\u003c\/span\u003e\u003cspan\u003er temperature and humidity\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWireless outdoor temperature and humidity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWind Speed \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWind Direction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolar Radiation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRainfall data \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUV\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes an indoor temperature and humidity sensor (\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/wireless-inside-temperature-and-humidity-sensor-f007th\" target=\"_blank\"\u003ethe SwitchDoc Labs F016TH\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch1\u003eDownloads\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/04\/WeatherRack2Installation1.3.pdf\" target=\"_blank\"\u003eWeatherRack2 Technical Specification and Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/rtl_433\"\u003ertl_433 Open Source Software supporting WeatherRack2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherRack2\"\u003eWeatherRack2 Raspberry P Python Test and Example Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherRack2\" target=\"_blank\"\u003eArduino WeatherRack2 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_WeatherRack2\" target=\"_blank\"\u003eESP32 WeatherRack2 Drivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/11\/ArduinoWeatherRack2Kit-1.1.pdf\" target=\"_blank\"\u003eArduino Kit Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/11\/RPiWeatherRack2Kit-1.1.pdf\" target=\"_blank\"\u003eRaspberry Pi Kit Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003eSoftware Defined Radio\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\"\u003eWe sell a compatible SDR and Antenna here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eON Amazon, you can buy a compatible \u003cmeta charset=\"utf-8\"\u003e SDR:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/3kDZtlv\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/3kDZtlv\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\"\u003e\u003c\/a\u003e Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/WeatherRack2Specs_480x480.png?v=1604885121\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IndoorSpecs_480x480.png?v=1604885043\"\u003e\u003c\/p\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003eExample Results\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"q62b-0-0\"\u003eHere is an example of results coming in from the WeatherRack2 from the PythonTest Software:\u003c\/div\u003e\n\u003cpre\u003epi@SwitchDocLabs:~\/SDL_Pi_WeatherRack2 $ sudo python3 readWeatherSensors.py\nStarting Wireless Read\u003cbr\u003e\n{\"time\" : \"2020-11-22 06:40:15\", \"model\" : \"SwitchDoc Labs FT020T AIO\", \"device\" : 12, \"id\" : 0, \"batterylow\" : 0, \"avewindspeed\" : 2, \"gustwindspeed\" : 3, \"winddirection\" : 18, \"cumulativerain\" : 180, \"temperature\" : 1011, \"humidity\" : 27, \"light\" : 1432, \"uv\" : 4, \"mic\" : \"CRC\"}\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/pre\u003e\n\u003ch2\u003eRaw Data Description\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003etime: Time of Message Reception\u003c\/li\u003e\n\u003cli\u003emodel: SwitchDoc Labs FT020T AIO\u003c\/li\u003e\n\u003cli\u003edevice: Serial Number of the sensor - changed on powerup but can be used to discriminate from other similar sensors in the area\u003c\/li\u003e\n\u003cli\u003ebatterylow: 0 if battery good, 1 if battery is getting low\u003c\/li\u003e\n\u003cli\u003eavewindspeed: Average Wind Speed in m\/s *10\u003c\/li\u003e\n\u003cli\u003egustwindspeed: Last Gust Speed in m\/s *10\u003c\/li\u003e\n\u003cli\u003ewinddirection: Wind Direction in degrees from 0-359.\u003c\/li\u003e\n\u003cli\u003ecumulativerain: Total rain since last reset or power off. in mm.*10\u003c\/li\u003e\n\u003cli\u003etemperature: outside temperature in F with 400 offset and *10 T = (value-400)\/10.0\u003c\/li\u003e\n\u003cli\u003ehumidity: Relative Humidity in %. light:\u003c\/li\u003e\n\u003cli\u003eVisible Sunlight in lux. uv: UV Index * 10 (meaning an uv index of 0.8 is in the example message above)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTemperature and Humidity Error Conditions\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf the humidity level in Hex is 0xFF, this is an error\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf the temperature level in Hex is 0x0FFF, this is an error\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eClearly those are errors. Here are three more Errors from the temperature:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eValid range for temperature: (with 400 offset added)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-40.0F to 140.0F\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInvalid value: 0X7FA\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBelow minimum: 0X7FC\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAbove maximum: 0X7FD\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eValid Range for Humidity 10% -100%\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eErrors for Humidity:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInvalid humidity: 0x7A\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eExamples:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003eFrom the Arduino Driver:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/5d47d3ae5623ba4b597fd8240dda8f7c_original_480x480.png?v=1604085271\"\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(35139213033639, { variant: {"id":35139213033639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0013-WEATHERRACK2-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"WeatherSense Wireless WeatherRack2","public_title":null,"options":["Default Title"],"price":17000,"weight":907,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728969","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 5451443208359, product_handle: "wireless-weatherrack2", price: 17000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("piweather-interface-board-for-raspberry-pi-arduino-weather-stations", 1818210009132, {"id":1818210009132,"title":"PiWeather - Interface board for Raspberry Pi\/Arduino Weather Stations","handle":"piweather-interface-board-for-raspberry-pi-arduino-weather-stations","description":"\u003ch1\u003ePiWeather Board For The Raspberry Pi \/ Arduino - Grove\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/4d03a958bbe4a9f1ca15cd3a1dec55fb_original_3ff6b2f1-a7e8-497d-a852-cf82be626485_large.JPG?v=1558195925\" alt=\"\"\u003e \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cul\u003e\n\u003cli\u003eProvides an excellent interface for a Weather Station hookup to Raspberry Pi or Arduino\u003c\/li\u003e\n\u003cli\u003eSupports Grove Connectors\u003c\/li\u003e\n\u003cli\u003eIncludes 4 channel I2C Mux based on the TCA9545\u003c\/li\u003e\n\u003cli\u003eIncludes Arduino and Raspberry Pi Software\u003c\/li\u003e\n\u003cli\u003eSupports SwitchDoc Labs WeatherRack Wind Vane \/ Anemometer \/ Rain Bucket\u003c\/li\u003e\n\u003cli\u003eContains I2C BME680 Barometer \/ Temperature \/ Humidity \/ Air Quality sensor\u003c\/li\u003e\n\u003cli\u003eDirectly powered from Raspberry Pi \/ Arduino\u003c\/li\u003e\n\u003cli\u003eWorks with Raspberry Pi (3.3V) GPIO and Arduino (5.0V) GPIO as well as the 5.0V Pi2Grover Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"column\"\u003eWant to build a Weather Station with the PiWeather board?\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cimg src=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/04\/PiWeather_041519-V1.1.jpg\" alt=\"\" width=\"416\" height=\"538\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eLook at these sources:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"s2\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/04\/PiWeather_041519-V1.1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePiWeather \u003c\/a\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/08\/PiWeather_041519-V1.2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBoard\u003c\/a\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/04\/PiWeather_041519-V1.1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e Specification V1.2\u003c\/a\u003e\u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSkyWeather Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack Weather Sensors now available.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/am2315-encased-i2c-temperature-and-humidity-sensor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOutdoor Temperature and Humidity Sensors now available.\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDownloads\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Software (Coming Soon)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_SkyWeather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSkyWeather Software for the PiWeather Board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\"\u003eYou can download the Full Weather Board Specification here \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eArduino Software (coming soon)\u003c\/li\u003e\n\u003cli\u003eArduino Software for the WeatherRack and the Weather Board is here \u003cspan\u003e(coming soon)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003eWhat are Grove Connectors?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eGrove connectors are standardized plugs for connecting devices together easily and without soldering. \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee our Full Grove Tutorial here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-12783 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_2861-2-300x204.jpg?4793822695298194265\" alt=\"Weather Board\" width=\"300\" height=\"204\"\u003e\u003c\/p\u003e\n\u003cp\u003eWeather Board and Weather Rack\u003c\/p\u003e\n\u003ch2\u003eBlock Diagram\u003c\/h2\u003e\n\u003cp\u003eIt was specifically designed to interface with the SwitchDoc WeatherRack and ArgentData Weather Sensors.\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eInterfaces on Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eI2C for Raspberry Pi and Arduino (Board works at 3.3V and 5V)\u003c\/li\u003e\n\u003cli\u003eRJ11 Plugs installed for SwitchDoc Labs WeatherRack, etc.\u003c\/li\u003e\n\u003cli\u003eWind Vane, Rain Bucket, Anemometer computer connections for Raspberry Pi and Arduino\u003c\/li\u003e\n\u003cli\u003eGrove Connections for all interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eI2C devices Included with the Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBME680 Barometer \/ Temperature \/ Humidity \/ IAQI Sensor\u003c\/li\u003e\n\u003cli\u003eADS1015 4  Channel 12 bit ADC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eI2C Device Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/ads1015.pdf\"\u003eADS1015 (12 bit ADC)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/05\/BME680.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBME680 Barometer \/ Temperature \/ Humidity \/ IAQI Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2014\/08\/IMG_0481.jpg\"\u003e\u003cimg class=\"wp-image-697 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_0481-225x300.jpg?14293708085406744205\" alt=\"SparkFun\" width=\"225\" height=\"300\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack\u003c\/a\u003e Sensors\u003c\/p\u003e\n\u003cp\u003eThe SDL_Weather_80422 class library is designed to provide all the functions of the \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSwitchDoc WeatherRack\u003c\/a\u003e, ArgentData Weather Sensors, SparkFun Weather Meters SEN-08942 in one C++ class. The library is easy to use and hides the complexity of the interface to the sensors. The C++ class has two Interrupt Service Routines (ISR), one each for the anemometer and the rain bucket. The wind vane is connected to an Analog to Digital Converter (ADC) input pin on the Arduino. Note that the C++ class is designed to be a singleton, in other words, you only can interface one sensor package without some additional work (mostly involving Interrupts). The article in \u003ca href=\"http:\/\/www.raspberry-pi-geek.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Geek magazine\u003c\/a\u003e discusses this in detail. There are two main modes for the class.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_SAMPLE\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_SAMPLE mode means return immediately after asking for the wind speed. The wind speed is averaged at sampleTime or since you last asked, whichever is longer. If the sample time has not passed since the last call, the class returns the last calculated wind speed. That means that you will never see changes faster than the specified sample time. This allows you to not wait for the wind speed, you can just grab the last valid reading.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_DELAY\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_DELAY mode means to wait for the set sample time to expire and return the average wind speed at the expiration. You would use this if you want to make sure you have the latest value and your program architecture allows you to pause for the sample time before continuing. Which mode you use depends on the specific software architecture of your Arduino application. Typically, I use SDL_MODE_SAMPLE because I can tolerate not having a current value of wind speed. The example code for the SDL_Weather_80422 library is shown below:\u003c\/p\u003e\n\u003cpre\u003e\/*\nSDL_Weather_80422_Library.ino - Example for using SDL_Weather_80422 Library\nFor SwitchDoc Labs WeatherRack \nWeather Sensor Assembly 80422 Argent Data Systems\nSparkFun\nCreated by SwitchDoc Labs July 27, 2014.\nReleased into the public domain.\n*\/\n#include \n#include\n\n#include \"SDL_Weather_80422.h\"\n\n#define pinLED 13 \/\/ LED connected to digital pin 13\n#define pinAnem 18 \/\/ Anenometer connected to pin 18 - Int 5\n#define pinRain 2 \n#define intAnem 5\n#define intRain 0\n\n\/\/ for mega, have to use Port B - only Port B works.\n\/*\nArduino Pins PORT\n------------ ----\nDigital 0-7 D\nDigital 8-13 B\nAnalog 0-5 C\n*\/\n\n\n\/\/ initialize SDL_Weather_80422 library\nSDL_Weather_80422 weatherStation(pinAnem, pinRain, intAnem, intRain, A0, SDL_MODE_INTERNAL_AD);\n\n\nuint8_t i;\n\n\nfloat currentWindSpeed;\nfloat currentWindGust;\nfloat totalRain;\nvoid setup()\n{ \nSerial.begin(57600); \n\nSerial.println(\"-----------\");\nSerial.println(\"WeatherPiArduino SDL_Weather_80422 Class Test\");\nSerial.println(\"Version 1.0\");\nSerial.println(\"-----------\");\n\n\nweatherStation.setWindMode(SDL_MODE_SAMPLE, 5.0);\n\/\/weatherStation.setWindMode(SDL_MODE_DELAY, 5.0);\ntotalRain = 0.0;\n}\n\n\nvoid loop()\n{\nSerial.println(\"----------------\");\n\ncurrentWindSpeed = weatherStation.current_wind_speed()\/1.6;\ncurrentWindGust = weatherStation.get_wind_gust()\/1.6;\ntotalRain = totalRain + weatherStation.get_current_rain_total()\/25.4;\nSerial.print(\"rain_total=\");\nSerial.print(totalRain);\nSerial.print(\"\"\" wind_speed=\");\nSerial.print(currentWindSpeed);\nSerial.print(\"MPH wind_gust=\");\nSerial.print(currentWindGust);\nSerial.print(\"MPH wind_direction=\");\nSerial.println(weatherStation.current_wind_direction());\n\n\ndelay(1000);\n\n\n}\n\u003c\/pre\u003e\n\u003cp\u003eWhen you run this, you should get a result similar to this:\u003c\/p\u003e\n\u003cpre\u003e-----------\n\nWeatherArduino SDL_Weather_80422 Class Test\nVersion 1.0\n\n-----------\n----------------\nrain_total=0.00 wind_speed=13.20MPH wind_gust=12.40MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=9.60MPH wind_gust=9.48MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=10.20MPH wind_gust=9.23MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=11.10MPH wind_gust=9.84MPH wind_direction=90.00\n\u003c\/pre\u003e","published_at":"2019-05-18T09:17:24-07:00","created_at":"2019-05-15T13:01:10-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":3200,"price_min":3200,"price_max":3200,"available":false,"price_varies":false,"compare_at_price":4495,"compare_at_price_min":4495,"compare_at_price_max":4495,"compare_at_price_varies":false,"variants":[{"id":14633570828332,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0011-WPIBRD-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PiWeather - Interface board for Raspberry Pi\/Arduino Weather Stations","public_title":null,"options":["Default Title"],"price":3200,"weight":14,"compare_at_price":4495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728846","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4d03a958bbe4a9f1ca15cd3a1dec55fb_original.JPG?v=1559219827","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Screen_Shot_2019-05-18_at_9.13.29_AM.png?v=1559219827","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Screen_Shot_2019-05-18_at_9.13.58_AM.png?v=1559219827"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4d03a958bbe4a9f1ca15cd3a1dec55fb_original.JPG?v=1559219827","options":["Title"],"media":[{"alt":null,"id":2454915514412,"position":1,"preview_image":{"aspect_ratio":1.103,"height":513,"width":566,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4d03a958bbe4a9f1ca15cd3a1dec55fb_original.JPG?v=1559219827"},"aspect_ratio":1.103,"height":513,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4d03a958bbe4a9f1ca15cd3a1dec55fb_original.JPG?v=1559219827","width":566},{"alt":null,"id":2454916759596,"position":2,"preview_image":{"aspect_ratio":1.491,"height":1622,"width":2419,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Screen_Shot_2019-05-18_at_9.13.29_AM.png?v=1559219827"},"aspect_ratio":1.491,"height":1622,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Screen_Shot_2019-05-18_at_9.13.29_AM.png?v=1559219827","width":2419},{"alt":null,"id":2454916792364,"position":3,"preview_image":{"aspect_ratio":1.043,"height":1679,"width":1751,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Screen_Shot_2019-05-18_at_9.13.58_AM.png?v=1559219827"},"aspect_ratio":1.043,"height":1679,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Screen_Shot_2019-05-18_at_9.13.58_AM.png?v=1559219827","width":1751}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003ePiWeather Board For The Raspberry Pi \/ Arduino - Grove\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/4d03a958bbe4a9f1ca15cd3a1dec55fb_original_3ff6b2f1-a7e8-497d-a852-cf82be626485_large.JPG?v=1558195925\" alt=\"\"\u003e \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"page\" title=\"Page 1\"\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cul\u003e\n\u003cli\u003eProvides an excellent interface for a Weather Station hookup to Raspberry Pi or Arduino\u003c\/li\u003e\n\u003cli\u003eSupports Grove Connectors\u003c\/li\u003e\n\u003cli\u003eIncludes 4 channel I2C Mux based on the TCA9545\u003c\/li\u003e\n\u003cli\u003eIncludes Arduino and Raspberry Pi Software\u003c\/li\u003e\n\u003cli\u003eSupports SwitchDoc Labs WeatherRack Wind Vane \/ Anemometer \/ Rain Bucket\u003c\/li\u003e\n\u003cli\u003eContains I2C BME680 Barometer \/ Temperature \/ Humidity \/ Air Quality sensor\u003c\/li\u003e\n\u003cli\u003eDirectly powered from Raspberry Pi \/ Arduino\u003c\/li\u003e\n\u003cli\u003eWorks with Raspberry Pi (3.3V) GPIO and Arduino (5.0V) GPIO as well as the 5.0V Pi2Grover Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"column\"\u003eWant to build a Weather Station with the PiWeather board?\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cimg src=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/04\/PiWeather_041519-V1.1.jpg\" alt=\"\" width=\"416\" height=\"538\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eLook at these sources:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"s2\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/04\/PiWeather_041519-V1.1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePiWeather \u003c\/a\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2020\/08\/PiWeather_041519-V1.2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBoard\u003c\/a\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/04\/PiWeather_041519-V1.1.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e Specification V1.2\u003c\/a\u003e\u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSkyWeather Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack Weather Sensors now available.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/am2315-encased-i2c-temperature-and-humidity-sensor\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOutdoor Temperature and Humidity Sensors now available.\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDownloads\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Software (Coming Soon)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_SkyWeather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSkyWeather Software for the PiWeather Board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherBoard_CurrentSpecification.pdf\"\u003eYou can download the Full Weather Board Specification here \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eArduino Software (coming soon)\u003c\/li\u003e\n\u003cli\u003eArduino Software for the WeatherRack and the Weather Board is here \u003cspan\u003e(coming soon)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 1.5em;\"\u003eWhat are Grove Connectors?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eGrove connectors are standardized plugs for connecting devices together easily and without soldering. \u003ca href=\"http:\/\/www.switchdoc.com\/2016\/02\/tutorial-intro-to-grove-connectors-for-arduinoraspberry-pi-projects\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee our Full Grove Tutorial here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-12783 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_2861-2-300x204.jpg?4793822695298194265\" alt=\"Weather Board\" width=\"300\" height=\"204\"\u003e\u003c\/p\u003e\n\u003cp\u003eWeather Board and Weather Rack\u003c\/p\u003e\n\u003ch2\u003eBlock Diagram\u003c\/h2\u003e\n\u003cp\u003eIt was specifically designed to interface with the SwitchDoc WeatherRack and ArgentData Weather Sensors.\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eInterfaces on Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eI2C for Raspberry Pi and Arduino (Board works at 3.3V and 5V)\u003c\/li\u003e\n\u003cli\u003eRJ11 Plugs installed for SwitchDoc Labs WeatherRack, etc.\u003c\/li\u003e\n\u003cli\u003eWind Vane, Rain Bucket, Anemometer computer connections for Raspberry Pi and Arduino\u003c\/li\u003e\n\u003cli\u003eGrove Connections for all interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eI2C devices Included with the Weather Board\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBME680 Barometer \/ Temperature \/ Humidity \/ IAQI Sensor\u003c\/li\u003e\n\u003cli\u003eADS1015 4  Channel 12 bit ADC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eI2C Device Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2015\/01\/ads1015.pdf\"\u003eADS1015 (12 bit ADC)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/05\/BME680.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBME680 Barometer \/ Temperature \/ Humidity \/ IAQI Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2014\/08\/IMG_0481.jpg\"\u003e\u003cimg class=\"wp-image-697 size-medium\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_IMG_0481-225x300.jpg?14293708085406744205\" alt=\"SparkFun\" width=\"225\" height=\"300\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack\u003c\/a\u003e Sensors\u003c\/p\u003e\n\u003cp\u003eThe SDL_Weather_80422 class library is designed to provide all the functions of the \u003ca title=\"WeatherRack Weather Sensors\" href=\"http:\/\/www.switchdoc.com\/weatherrack-weather-sensors\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSwitchDoc WeatherRack\u003c\/a\u003e, ArgentData Weather Sensors, SparkFun Weather Meters SEN-08942 in one C++ class. The library is easy to use and hides the complexity of the interface to the sensors. The C++ class has two Interrupt Service Routines (ISR), one each for the anemometer and the rain bucket. The wind vane is connected to an Analog to Digital Converter (ADC) input pin on the Arduino. Note that the C++ class is designed to be a singleton, in other words, you only can interface one sensor package without some additional work (mostly involving Interrupts). The article in \u003ca href=\"http:\/\/www.raspberry-pi-geek.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Geek magazine\u003c\/a\u003e discusses this in detail. There are two main modes for the class.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_SAMPLE\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_SAMPLE mode means return immediately after asking for the wind speed. The wind speed is averaged at sampleTime or since you last asked, whichever is longer. If the sample time has not passed since the last call, the class returns the last calculated wind speed. That means that you will never see changes faster than the specified sample time. This allows you to not wait for the wind speed, you can just grab the last valid reading.\u003c\/p\u003e\n\u003ch3\u003eSDL_MODE_DELAY\u003c\/h3\u003e\n\u003cp\u003eSDL_MODE_DELAY mode means to wait for the set sample time to expire and return the average wind speed at the expiration. You would use this if you want to make sure you have the latest value and your program architecture allows you to pause for the sample time before continuing. Which mode you use depends on the specific software architecture of your Arduino application. Typically, I use SDL_MODE_SAMPLE because I can tolerate not having a current value of wind speed. The example code for the SDL_Weather_80422 library is shown below:\u003c\/p\u003e\n\u003cpre\u003e\/*\nSDL_Weather_80422_Library.ino - Example for using SDL_Weather_80422 Library\nFor SwitchDoc Labs WeatherRack \nWeather Sensor Assembly 80422 Argent Data Systems\nSparkFun\nCreated by SwitchDoc Labs July 27, 2014.\nReleased into the public domain.\n*\/\n#include \n#include\n\n#include \"SDL_Weather_80422.h\"\n\n#define pinLED 13 \/\/ LED connected to digital pin 13\n#define pinAnem 18 \/\/ Anenometer connected to pin 18 - Int 5\n#define pinRain 2 \n#define intAnem 5\n#define intRain 0\n\n\/\/ for mega, have to use Port B - only Port B works.\n\/*\nArduino Pins PORT\n------------ ----\nDigital 0-7 D\nDigital 8-13 B\nAnalog 0-5 C\n*\/\n\n\n\/\/ initialize SDL_Weather_80422 library\nSDL_Weather_80422 weatherStation(pinAnem, pinRain, intAnem, intRain, A0, SDL_MODE_INTERNAL_AD);\n\n\nuint8_t i;\n\n\nfloat currentWindSpeed;\nfloat currentWindGust;\nfloat totalRain;\nvoid setup()\n{ \nSerial.begin(57600); \n\nSerial.println(\"-----------\");\nSerial.println(\"WeatherPiArduino SDL_Weather_80422 Class Test\");\nSerial.println(\"Version 1.0\");\nSerial.println(\"-----------\");\n\n\nweatherStation.setWindMode(SDL_MODE_SAMPLE, 5.0);\n\/\/weatherStation.setWindMode(SDL_MODE_DELAY, 5.0);\ntotalRain = 0.0;\n}\n\n\nvoid loop()\n{\nSerial.println(\"----------------\");\n\ncurrentWindSpeed = weatherStation.current_wind_speed()\/1.6;\ncurrentWindGust = weatherStation.get_wind_gust()\/1.6;\ntotalRain = totalRain + weatherStation.get_current_rain_total()\/25.4;\nSerial.print(\"rain_total=\");\nSerial.print(totalRain);\nSerial.print(\"\"\" wind_speed=\");\nSerial.print(currentWindSpeed);\nSerial.print(\"MPH wind_gust=\");\nSerial.print(currentWindGust);\nSerial.print(\"MPH wind_direction=\");\nSerial.println(weatherStation.current_wind_direction());\n\n\ndelay(1000);\n\n\n}\n\u003c\/pre\u003e\n\u003cp\u003eWhen you run this, you should get a result similar to this:\u003c\/p\u003e\n\u003cpre\u003e-----------\n\nWeatherArduino SDL_Weather_80422 Class Test\nVersion 1.0\n\n-----------\n----------------\nrain_total=0.00 wind_speed=13.20MPH wind_gust=12.40MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=9.60MPH wind_gust=9.48MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=10.20MPH wind_gust=9.23MPH wind_direction=90.00\n----------------\nrain_total=0.00 wind_speed=11.10MPH wind_gust=9.84MPH wind_direction=90.00\n\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(14633570828332, { variant: {"id":14633570828332,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0011-WPIBRD-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PiWeather - Interface board for Raspberry Pi\/Arduino Weather Stations","public_title":null,"options":["Default Title"],"price":3200,"weight":14,"compare_at_price":4495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728846","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 1818210009132, product_handle: "piweather-interface-board-for-raspberry-pi-arduino-weather-stations", price: 3200, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("radiation-shield-for-am2315-3d-printed", 229340184606, {"id":229340184606,"title":"Radiation Shield for AM2315 - 3D Printed","handle":"radiation-shield-for-am2315-3d-printed","description":"\u003ch1 class=\"p1\"\u003eRadiation Shield for AM2315 - 3D Printed\u003c\/h1\u003e\n\u003cp class=\"p2\"\u003eColor will vary from pictures.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003eIf you have a 3D Printer, here is the code to make your own Radiation Shield for the AM2315. If you don't, we provide one here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li4\"\u003e\u003cspan class=\"s4\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherPiASCover.scad_.zip\"\u003e\u003cspan class=\"s5\"\u003eopenSCAD File\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\u003cspan class=\"s4\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherPiASCover072116.stl_.zip\"\u003e\u003cspan class=\"s5\"\u003e3D Printer Ready STL File\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e","published_at":"2017-10-19T21:20:00-07:00","created_at":"2017-10-19T21:20:01-07:00","vendor":"vendor-unknown","type":"Shop All,Weather,Grove,Sensors,3D Printed Products","tags":[],"price":1550,"price_min":1550,"price_max":1550,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340694028318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0102-RADSHIELD-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Radiation Shield for AM2315 - 3D Printed","public_title":null,"options":["Default Title"],"price":1550,"weight":37,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b8d791182644a078bd77979783f545ba.jpg?v=1508473201","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5228634f0c627c4cce4f1e9272f99157.png?v=1508473201","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e033f6f0479a0d10ed8795ffab8a4c1c.jpg?v=1508473201"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b8d791182644a078bd77979783f545ba.jpg?v=1508473201","options":["Title"],"media":[{"alt":"Radiation Shield for AM2315 - 3D Printed","id":828924657708,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b8d791182644a078bd77979783f545ba.jpg?v=1508473201"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/b8d791182644a078bd77979783f545ba.jpg?v=1508473201","width":1024},{"alt":"Radiation Shield for AM2315 - 3D Printed","id":828924723244,"position":2,"preview_image":{"aspect_ratio":1.44,"height":711,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5228634f0c627c4cce4f1e9272f99157.png?v=1508473201"},"aspect_ratio":1.44,"height":711,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5228634f0c627c4cce4f1e9272f99157.png?v=1508473201","width":1024},{"alt":"Radiation Shield for AM2315 - 3D Printed","id":828924788780,"position":3,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e033f6f0479a0d10ed8795ffab8a4c1c.jpg?v=1508473201"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e033f6f0479a0d10ed8795ffab8a4c1c.jpg?v=1508473201","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"p1\"\u003eRadiation Shield for AM2315 - 3D Printed\u003c\/h1\u003e\n\u003cp class=\"p2\"\u003eColor will vary from pictures.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s1\"\u003eIf you have a 3D Printer, here is the code to make your own Radiation Shield for the AM2315. If you don't, we provide one here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li4\"\u003e\u003cspan class=\"s4\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherPiASCover.scad_.zip\"\u003e\u003cspan class=\"s5\"\u003eopenSCAD File\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li4\"\u003e\u003cspan class=\"s4\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/07\/WeatherPiASCover072116.stl_.zip\"\u003e\u003cspan class=\"s5\"\u003e3D Printer Ready STL File\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(3340694028318, { variant: {"id":3340694028318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0102-RADSHIELD-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Radiation Shield for AM2315 - 3D Printed","public_title":null,"options":["Default Title"],"price":1550,"weight":37,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229340184606, product_handle: "radiation-shield-for-am2315-3d-printed", price: 1550, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-dust-sensor", 1191101890604, {"id":1191101890604,"title":"Grove Dust Sensor Air Quality","handle":"grove-dust-sensor","description":"\u003ch1\u003eGrove Dust Sensor Air Quality\u003c\/h1\u003e\n\u003cp\u003eThis Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration. The Particulate Matter level (PM level) in the air is measured by counting the Low Pulse Occupancy time (LPO time) in given time unit. LPO time is proportional to PM concentration. This sensor can provide reliable data for air purifier systems; it is responsive to PM of diameter 1μm.\u003c\/p\u003e\n\u003cp\u003eWith tweaking, you can also separate out particles 2.5uM and above.\u003c\/p\u003e\n\u003cp\u003eUse the Pi2Grover board to connect to the Raspberry Pi\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\" target=\"_blank\"\u003ehttps:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGrove compatible interface(extra wire with connecter)\u003c\/li\u003e\n\u003cli\u003eSupply voltage range: 5V\u003c\/li\u003e\n\u003cli\u003eMinimum detect particle: 1um\u003c\/li\u003e\n\u003cli\u003ePWM output\u003c\/li\u003e\n\u003cli\u003eDimensions: 59(W)x45(H)x22(D) [mm]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eApplication Ideas\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAir Purifier\u003c\/li\u003e\n\u003cli\u003eAir Quality Monitor\u003c\/li\u003e\n\u003cli\u003eAir Conditioner\u003c\/li\u003e\n\u003cli\u003eVentilator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/wiki.seeedstudio.com\/Grove-Dust_Sensor\/\" target=\"_blank\"\u003eArduino Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_DustSensor\" target=\"_blank\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eESP32 Driver (Coming Soon)\u003c\/li\u003e\n\u003cli\u003eESP8266 Driver (Coming Soon)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/Grove_-_Dust_sensor.pdf\" target=\"_blank\"\u003eGrove Dust Sensor DataSheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/ShinyeiPPD42NS_Deconstruction_TracyAllen.pdf\" target=\"_blank\"\u003eArticle on Deconstruction of the Dust Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"admonition-title\"\u003eWarnings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis sensor uses a counting method to measure dust concentration, not using a weighing method, and the unit is pcs\/L or pcs\/0.01cf.\u003c\/li\u003e\n\u003cli\u003ePlease keep it upright.\u003c\/li\u003e\n\u003cli\u003e3 min preheat time is required while using for the first time.\u003c\/li\u003e\n\u003cli\u003eArbitrary operation may cause unexpected damage.\u003c\/li\u003e\n\u003cli\u003eThe adjustments on the board (potentiometers) are used only for the factory setting. \u003cstrong\u003eDO NOT\u003c\/strong\u003e change the default configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"md-typeset__scrollwrap\"\u003e\n\u003cdiv class=\"md-typeset__table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eNorm\u003c\/th\u003e\n\u003cth\u003eUnit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003e4.75~5.75\u003c\/td\u003e\n\u003ctd\u003eV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Current Supply\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003ctd\u003emA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetectable range of concentration\u003c\/td\u003e\n\u003ctd\u003e0~28,000 \/ 0 ~ 8000\u003c\/td\u003e\n\u003ctd\u003epcs\/liter \/ pcs\/0.01cf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e0~45\u003c\/td\u003e\n\u003ctd\u003e°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Method\u003c\/td\u003e\n\u003ctd\u003eNegative Logic, Digital output, High: over 4.0V(Rev.2), Low: under 0.7V\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetecting the particle diameter\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1\u003c\/td\u003e\n\u003ctd\u003eμm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e59(W) × 45(H) × 22(D)\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Range\u003c\/td\u003e\n\u003ctd\u003e95% rh or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-08-30T06:27:11-07:00","created_at":"2018-08-30T06:34:20-07:00","vendor":"SwitchDoc Labs","type":"Grove","tags":[],"price":1095,"price_min":1095,"price_max":1095,"available":false,"price_varies":false,"compare_at_price":1495,"compare_at_price_min":1495,"compare_at_price_max":1495,"compare_at_price_varies":false,"variants":[{"id":11627429003308,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0270-GRVDUST-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grove Dust Sensor Air Quality","public_title":null,"options":["Default Title"],"price":1095,"weight":27,"compare_at_price":1495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728778","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/uWrU3oXM0DKLIYyJ8cVDnFlb.jpg?v=1536267007","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7366.JPG?v=1536267007","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1zRTtnO24twjUFuc0bKxXO1h.jpg?v=1536267007","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Dust1.JPG?v=1536267007","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/600px-Characteristics.jpg?v=1536267007","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b4waAQBTtYZgw6JduF0nvWN.jpg?v=1536267007"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/uWrU3oXM0DKLIYyJ8cVDnFlb.jpg?v=1536267007","options":["Title"],"media":[{"alt":null,"id":2075214643244,"position":1,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/uWrU3oXM0DKLIYyJ8cVDnFlb.jpg?v=1536267007"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/uWrU3oXM0DKLIYyJ8cVDnFlb.jpg?v=1536267007","width":700},{"alt":null,"id":2084351475756,"position":2,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7366.JPG?v=1536267007"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7366.JPG?v=1536267007","width":3024},{"alt":null,"id":2075214708780,"position":3,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1zRTtnO24twjUFuc0bKxXO1h.jpg?v=1536267007"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/1zRTtnO24twjUFuc0bKxXO1h.jpg?v=1536267007","width":700},{"alt":null,"id":2075214741548,"position":4,"preview_image":{"aspect_ratio":1.283,"height":798,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Dust1.JPG?v=1536267007"},"aspect_ratio":1.283,"height":798,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/Dust1.JPG?v=1536267007","width":1024},{"alt":null,"id":2075214774316,"position":5,"preview_image":{"aspect_ratio":1.31,"height":458,"width":600,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/600px-Characteristics.jpg?v=1536267007"},"aspect_ratio":1.31,"height":458,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/600px-Characteristics.jpg?v=1536267007","width":600},{"alt":null,"id":2075214676012,"position":6,"preview_image":{"aspect_ratio":1.333,"height":525,"width":700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b4waAQBTtYZgw6JduF0nvWN.jpg?v=1536267007"},"aspect_ratio":1.333,"height":525,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b4waAQBTtYZgw6JduF0nvWN.jpg?v=1536267007","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eGrove Dust Sensor Air Quality\u003c\/h1\u003e\n\u003cp\u003eThis Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration. The Particulate Matter level (PM level) in the air is measured by counting the Low Pulse Occupancy time (LPO time) in given time unit. LPO time is proportional to PM concentration. This sensor can provide reliable data for air purifier systems; it is responsive to PM of diameter 1μm.\u003c\/p\u003e\n\u003cp\u003eWith tweaking, you can also separate out particles 2.5uM and above.\u003c\/p\u003e\n\u003cp\u003eUse the Pi2Grover board to connect to the Raspberry Pi\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\" target=\"_blank\"\u003ehttps:\/\/shop.switchdoc.com\/products\/pi2grover-raspberry-pi-to-grove-connector-interface-board\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGrove compatible interface(extra wire with connecter)\u003c\/li\u003e\n\u003cli\u003eSupply voltage range: 5V\u003c\/li\u003e\n\u003cli\u003eMinimum detect particle: 1um\u003c\/li\u003e\n\u003cli\u003ePWM output\u003c\/li\u003e\n\u003cli\u003eDimensions: 59(W)x45(H)x22(D) [mm]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eApplication Ideas\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAir Purifier\u003c\/li\u003e\n\u003cli\u003eAir Quality Monitor\u003c\/li\u003e\n\u003cli\u003eAir Conditioner\u003c\/li\u003e\n\u003cli\u003eVentilator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/wiki.seeedstudio.com\/Grove-Dust_Sensor\/\" target=\"_blank\"\u003eArduino Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_DustSensor\" target=\"_blank\"\u003eRaspberry Pi Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eESP32 Driver (Coming Soon)\u003c\/li\u003e\n\u003cli\u003eESP8266 Driver (Coming Soon)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/Grove_-_Dust_sensor.pdf\" target=\"_blank\"\u003eGrove Dust Sensor DataSheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/08\/ShinyeiPPD42NS_Deconstruction_TracyAllen.pdf\" target=\"_blank\"\u003eArticle on Deconstruction of the Dust Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"admonition-title\"\u003eWarnings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis sensor uses a counting method to measure dust concentration, not using a weighing method, and the unit is pcs\/L or pcs\/0.01cf.\u003c\/li\u003e\n\u003cli\u003ePlease keep it upright.\u003c\/li\u003e\n\u003cli\u003e3 min preheat time is required while using for the first time.\u003c\/li\u003e\n\u003cli\u003eArbitrary operation may cause unexpected damage.\u003c\/li\u003e\n\u003cli\u003eThe adjustments on the board (potentiometers) are used only for the factory setting. \u003cstrong\u003eDO NOT\u003c\/strong\u003e change the default configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"md-typeset__scrollwrap\"\u003e\n\u003cdiv class=\"md-typeset__table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eNorm\u003c\/th\u003e\n\u003cth\u003eUnit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003e4.75~5.75\u003c\/td\u003e\n\u003ctd\u003eV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Current Supply\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003ctd\u003emA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetectable range of concentration\u003c\/td\u003e\n\u003ctd\u003e0~28,000 \/ 0 ~ 8000\u003c\/td\u003e\n\u003ctd\u003epcs\/liter \/ pcs\/0.01cf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e0~45\u003c\/td\u003e\n\u003ctd\u003e°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Method\u003c\/td\u003e\n\u003ctd\u003eNegative Logic, Digital output, High: over 4.0V(Rev.2), Low: under 0.7V\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetecting the particle diameter\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1\u003c\/td\u003e\n\u003ctd\u003eμm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e59(W) × 45(H) × 22(D)\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Range\u003c\/td\u003e\n\u003ctd\u003e95% rh or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"});window.BOLD.common.Shopify.saveVariant(11627429003308, { variant: {"id":11627429003308,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0270-GRVDUST-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grove Dust Sensor Air Quality","public_title":null,"options":["Default Title"],"price":1095,"weight":27,"compare_at_price":1495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728778","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 1191101890604, product_handle: "grove-dust-sensor", price: 1095, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("copy-of-expansion-kit-for-ourweather", 4332793200684, {"id":4332793200684,"title":"OurWeather V2 Upgrade Kit","handle":"copy-of-expansion-kit-for-ourweather","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003e OurWeather V1 to V2 Upgrade Kit\u003c\/h1\u003e\n\u003cp\u003eIf you purchased an OurWeather Kit before November 11, 2019, you have the V1 of OurWeather.  You can upgrade your OurWeather to the V2 Kit with this kit.  It contains:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeatherPlus2 Board\u003c\/li\u003e\n\u003cli\u003eSHT30 Temperature and Humidity Sensor\u003c\/li\u003e\n\u003cli\u003eBox of M2 Supports\u003c\/li\u003e\n\u003cli\u003eWIFi Antenna and Cable\u003c\/li\u003e\n\u003cli\u003eOurWeather V2 3D Print Case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo upgrade your V1 Kit, just take apart your V1 kit and reassemble with the V2 Parts and the Manual below.  Simple!   You won't have to reassemble your WeatherRack.  You will have some parts leftover, notably the AM2315 and the old WeatherPlus Board.  For more information on Version 2 of OurWeather, please go to the \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/ourweather-complete-weather-kit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOurWeather product page.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003eDownloads for Version 2\u003c\/h1\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s3\"\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/OurWeatherAssembly.pdf\"\u003eAssembly and\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/OurWeatherV2Assembly-1.pdf\"\u003eOperations\u003c\/a\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/OurWeatherAssembly.pdf\"\u003e\u003cspan\u003e \u003c\/span\u003eManual\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s5\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/OurWeatherAdvancedUsageManual5.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdvanced Usage Manual (Now Version 5.0)\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s5\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/OurWeatherAdvancedUsageManual5.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstalling the Blynk Application on iPhone and Android\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s5\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/2018\/01\/tutorial-voice-time-ourweather-and-amazon-alexa-part-1\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eConnecting Alexa to OurWeather\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/weatherplus\/\"\u003e\u003cspan class=\"s5\"\u003eWeatherPlus2 Product Page and Documentation\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\"\u003e\u003cspan class=\"s5\"\u003eOurWeather Software Source Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/WeatherUndergroundV2.pdf\"\u003e\u003cspan class=\"s3\"\u003eConnecting OurWeather to the WeatherUnderground\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s6\"\u003e- Over-The-Air Update- see the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s3\"\u003eAssembly and Operations Manual\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eto update\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/ourweather-rest-interface-interface-raspberry-pi\/\"\u003e\u003cspan class=\"s5\"\u003eOurWeather REST Interface and the Raspberry Pi\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-11-11T18:24:09-08:00","created_at":"2019-11-11T18:24:09-08:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Raspberry Pi,Arduino,ESP8266,I2C,Full Kits","tags":[],"price":8000,"price_min":8000,"price_max":8000,"available":false,"price_varies":false,"compare_at_price":9000,"compare_at_price_min":9000,"compare_at_price_max":9000,"compare_at_price_varies":false,"variants":[{"id":31103462113324,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0692-OWUGRADE12-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"OurWeather V2 Upgrade Kit","public_title":null,"options":["Default Title"],"price":8000,"weight":181,"compare_at_price":9000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/OW-splash.png?v=1573526175","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1367_85cb8e95-621a-415e-b81e-aa4e59e3245a.jpg?v=1573526175","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_8671_2_copy.jpg?v=1573526175","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0038_2.jpg?v=1573526175","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/BaseUnitAnno.jpg?v=1573526175","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/DeviceAnno_251bcb19-afac-45c4-8bad-b5f8de086c69.jpg?v=1573526175","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/LEDAnno_3f054d96-c885-41ee-bd85-5f623d986954.jpg?v=1573526175"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/OW-splash.png?v=1573526175","options":["Title"],"media":[{"alt":null,"id":5529344835628,"position":1,"preview_image":{"aspect_ratio":1.778,"height":576,"width":1024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/OW-splash.png?v=1573526175"},"aspect_ratio":1.778,"height":576,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/OW-splash.png?v=1573526175","width":1024},{"alt":null,"id":5529339002924,"position":2,"preview_image":{"aspect_ratio":1.414,"height":1191,"width":1684,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1367_85cb8e95-621a-415e-b81e-aa4e59e3245a.jpg?v=1573526175"},"aspect_ratio":1.414,"height":1191,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_1367_85cb8e95-621a-415e-b81e-aa4e59e3245a.jpg?v=1573526175","width":1684},{"alt":null,"id":5529340182572,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_8671_2_copy.jpg?v=1573526175"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_8671_2_copy.jpg?v=1573526175","width":3024},{"alt":null,"id":5529341329452,"position":4,"preview_image":{"aspect_ratio":1.44,"height":1639,"width":2360,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0038_2.jpg?v=1573526175"},"aspect_ratio":1.44,"height":1639,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0038_2.jpg?v=1573526175","width":2360},{"alt":null,"id":5529343393836,"position":5,"preview_image":{"aspect_ratio":0.787,"height":3013,"width":2370,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/BaseUnitAnno.jpg?v=1573526175"},"aspect_ratio":0.787,"height":3013,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/BaseUnitAnno.jpg?v=1573526175","width":2370},{"alt":null,"id":5529343426604,"position":6,"preview_image":{"aspect_ratio":1.559,"height":700,"width":1091,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/DeviceAnno_251bcb19-afac-45c4-8bad-b5f8de086c69.jpg?v=1573526175"},"aspect_ratio":1.559,"height":700,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/DeviceAnno_251bcb19-afac-45c4-8bad-b5f8de086c69.jpg?v=1573526175","width":1091},{"alt":null,"id":5529343623212,"position":7,"preview_image":{"aspect_ratio":1.559,"height":700,"width":1091,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/LEDAnno_3f054d96-c885-41ee-bd85-5f623d986954.jpg?v=1573526175"},"aspect_ratio":1.559,"height":700,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/LEDAnno_3f054d96-c885-41ee-bd85-5f623d986954.jpg?v=1573526175","width":1091}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003e OurWeather V1 to V2 Upgrade Kit\u003c\/h1\u003e\n\u003cp\u003eIf you purchased an OurWeather Kit before November 11, 2019, you have the V1 of OurWeather.  You can upgrade your OurWeather to the V2 Kit with this kit.  It contains:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeatherPlus2 Board\u003c\/li\u003e\n\u003cli\u003eSHT30 Temperature and Humidity Sensor\u003c\/li\u003e\n\u003cli\u003eBox of M2 Supports\u003c\/li\u003e\n\u003cli\u003eWIFi Antenna and Cable\u003c\/li\u003e\n\u003cli\u003eOurWeather V2 3D Print Case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo upgrade your V1 Kit, just take apart your V1 kit and reassemble with the V2 Parts and the Manual below.  Simple!   You won't have to reassemble your WeatherRack.  You will have some parts leftover, notably the AM2315 and the old WeatherPlus Board.  For more information on Version 2 of OurWeather, please go to the \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/ourweather-complete-weather-kit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOurWeather product page.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003eDownloads for Version 2\u003c\/h1\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s3\"\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/OurWeatherAssembly.pdf\"\u003eAssembly and\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/OurWeatherV2Assembly-1.pdf\"\u003eOperations\u003c\/a\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/05\/OurWeatherAssembly.pdf\"\u003e\u003cspan\u003e \u003c\/span\u003eManual\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s5\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/OurWeatherAdvancedUsageManual5.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdvanced Usage Manual (Now Version 5.0)\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s5\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/OurWeatherAdvancedUsageManual5.0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstalling the Blynk Application on iPhone and Android\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e\u003cspan class=\"s5\"\u003e- \u003ca href=\"http:\/\/www.switchdoc.com\/2018\/01\/tutorial-voice-time-ourweather-and-amazon-alexa-part-1\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eConnecting Alexa to OurWeather\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/weatherplus\/\"\u003e\u003cspan class=\"s5\"\u003eWeatherPlus2 Product Page and Documentation\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/OurWeatherWeatherPlus\"\u003e\u003cspan class=\"s5\"\u003eOurWeather Software Source Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2019\/11\/WeatherUndergroundV2.pdf\"\u003e\u003cspan class=\"s3\"\u003eConnecting OurWeather to the WeatherUnderground\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s6\"\u003e- Over-The-Air Update- see the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s3\"\u003eAssembly and Operations Manual\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eto update\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\u003cspan class=\"s2\"\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/ourweather-rest-interface-interface-raspberry-pi\/\"\u003e\u003cspan class=\"s5\"\u003eOurWeather REST Interface and the Raspberry Pi\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(31103462113324, { variant: {"id":31103462113324,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0692-OWUGRADE12-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"OurWeather V2 Upgrade Kit","public_title":null,"options":["Default Title"],"price":8000,"weight":181,"compare_at_price":9000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 4332793200684, product_handle: "copy-of-expansion-kit-for-ourweather", price: 8000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("weatherrack-interface-board-for-grove-pin-headers-rj11", 229359058974, {"id":229359058974,"title":"WeatherRack Interface Board for Grove \/ Pin Headers - RJ11 WXLinkWR","handle":"weatherrack-interface-board-for-grove-pin-headers-rj11","description":"\u003ch1\u003eWeatherRack Interface Board for Grove \/ Pin Headers - RJ11\u003c\/h1\u003e\n\u003cp\u003eThis board is designed for connecting a \u003ca href=\"https:\/\/store.switchdoc.com\/weatherrack-anemometer-wind-rain-for-weatherpiarduino-weatherplus-raspberry-pi-arduino\/\" target=\"_blank\"\u003eSwitchDoc Labs WeatherRack\u003c\/a\u003e (Anemometer\/Wind Vane\/Rain Bucket) to Raspberry Pi and Arduino systems. Includes pullups on the Anemometer and Rain Bucket. Analog Wind Vane signal has a pullup also to VDD.\u003c\/p\u003e\n\u003cp\u003eAnemometer - Pullup 47K to VDD\u003c\/p\u003e\n\u003cp\u003eRain Bucket - Pullup 47K to VDD\u003c\/p\u003e\n\u003cp\u003eWindVane - Pullup 10K to VDD\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"img-9995.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9995.jpg?11054530920153114511\" alt=\"img-9995.jpg\" width=\"447\" height=\"394\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the board that is used in:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/solar-wxlink-wireless-data-link-designed-for-the-weatherrack-and-the-weatherboard\/\" target=\"_blank\"\u003eSolarWXLink - Solar Powered WeatherLink for the WeatherRack\/AM2315\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/wxlink-wireless-data-link-designed-for-the-weatherrack-and-the-weatherboard\/\" target=\"_blank\"\u003eWXLInk - WeatherLink for the WeatherRack\/AM2315\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-19T21:24:02-07:00","created_at":"2017-10-19T21:24:02-07:00","vendor":"vendor-unknown","type":"Shop All,Weather,Grove,Break Out Boards","tags":[],"price":995,"price_min":995,"price_max":995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3340991627294,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0101-GWXLinkWR-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"WeatherRack Interface Board for Grove \/ Pin Headers - RJ11 WXLinkWR","public_title":null,"options":["Default Title"],"price":995,"weight":14,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6872625cad4f7a828c2fa10c0d91ed23.jpg?v=1508473443","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6af10d01404e4c8f82c053a8f4b85cb4.jpg?v=1508473443"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6872625cad4f7a828c2fa10c0d91ed23.jpg?v=1508473443","options":["Title"],"media":[{"alt":"WeatherRack Interface Board for Grove \/ Pin Headers - RJ11","id":828955983916,"position":1,"preview_image":{"aspect_ratio":1.136,"height":1127,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6872625cad4f7a828c2fa10c0d91ed23.jpg?v=1508473443"},"aspect_ratio":1.136,"height":1127,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6872625cad4f7a828c2fa10c0d91ed23.jpg?v=1508473443","width":1280},{"alt":"WeatherRack Interface Board for Grove \/ Pin Headers - RJ11","id":828956016684,"position":2,"preview_image":{"aspect_ratio":0.587,"height":943,"width":554,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6af10d01404e4c8f82c053a8f4b85cb4.jpg?v=1508473443"},"aspect_ratio":0.587,"height":943,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6af10d01404e4c8f82c053a8f4b85cb4.jpg?v=1508473443","width":554}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eWeatherRack Interface Board for Grove \/ Pin Headers - RJ11\u003c\/h1\u003e\n\u003cp\u003eThis board is designed for connecting a \u003ca href=\"https:\/\/store.switchdoc.com\/weatherrack-anemometer-wind-rain-for-weatherpiarduino-weatherplus-raspberry-pi-arduino\/\" target=\"_blank\"\u003eSwitchDoc Labs WeatherRack\u003c\/a\u003e (Anemometer\/Wind Vane\/Rain Bucket) to Raspberry Pi and Arduino systems. Includes pullups on the Anemometer and Rain Bucket. Analog Wind Vane signal has a pullup also to VDD.\u003c\/p\u003e\n\u003cp\u003eAnemometer - Pullup 47K to VDD\u003c\/p\u003e\n\u003cp\u003eRain Bucket - Pullup 47K to VDD\u003c\/p\u003e\n\u003cp\u003eWindVane - Pullup 10K to VDD\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"img-9995.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_img-9995.jpg?11054530920153114511\" alt=\"img-9995.jpg\" width=\"447\" height=\"394\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the board that is used in:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/solar-wxlink-wireless-data-link-designed-for-the-weatherrack-and-the-weatherboard\/\" target=\"_blank\"\u003eSolarWXLink - Solar Powered WeatherLink for the WeatherRack\/AM2315\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.switchdoc.com\/wxlink-wireless-data-link-designed-for-the-weatherrack-and-the-weatherboard\/\" target=\"_blank\"\u003eWXLInk - WeatherLink for the WeatherRack\/AM2315\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(3340991627294, { variant: {"id":3340991627294,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0101-GWXLinkWR-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"WeatherRack Interface Board for Grove \/ Pin Headers - RJ11 WXLinkWR","public_title":null,"options":["Default Title"],"price":995,"weight":14,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 229359058974, product_handle: "weatherrack-interface-board-for-grove-pin-headers-rj11", price: 995, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-mini-pro-plus", 7973038588124, {"id":7973038588124,"title":"Grove Mini Pro Plus","handle":"grove-mini-pro-plus","description":"\u003ch1 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eGrove Mini Pro Plus board replacement\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eThis board is used in numerous SwitchDoc Labs products.   We are selling this as replacements or for people wishing to build the WeatherRack3.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eMain features are:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- 328p 16MHz Arduino\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- Grove connectors for I2C, Data, 433MHz Transmit and Receive\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- WatchDog Timer built in\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- Flexible input power supplies\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe Arduino family of processors is a fabulous prototyping and building system for Makers. The combination of the Arduino IDE with its thousands of available drivers for sensors and the ATMega line of processors have spawned a tremendous burst of creativity around the world.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003eTo Use with Arduino IDE\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eSelect Arduino Mini Pro Plus and 16MHz\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e","published_at":"2023-01-29T11:04:36-08:00","created_at":"2023-01-29T10:53:00-08:00","vendor":"switchdoc labs","type":"Shop All,Weather,Grove,Arduino,Wireless","tags":[],"price":2000,"price_min":2000,"price_max":2000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43759674687708,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0750-MINIPROPLUS-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grove Mini Pro Plus","public_title":null,"options":["Default Title"],"price":2000,"weight":85,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6034anno.jpg?v=1675018824","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6034.jpg?v=1675018842"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6034anno.jpg?v=1675018824","options":["Title"],"media":[{"alt":null,"id":31201660928220,"position":1,"preview_image":{"aspect_ratio":1.563,"height":1697,"width":2653,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6034anno.jpg?v=1675018824"},"aspect_ratio":1.563,"height":1697,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6034anno.jpg?v=1675018824","width":2653},{"alt":null,"id":31201662173404,"position":2,"preview_image":{"aspect_ratio":1.563,"height":1697,"width":2653,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6034.jpg?v=1675018842"},"aspect_ratio":1.563,"height":1697,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6034.jpg?v=1675018842","width":2653}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eGrove Mini Pro Plus board replacement\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eThis board is used in numerous SwitchDoc Labs products.   We are selling this as replacements or for people wishing to build the WeatherRack3.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003eMain features are:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- 328p 16MHz Arduino\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- Grove connectors for I2C, Data, 433MHz Transmit and Receive\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- WatchDog Timer built in\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cstrong\u003e- Flexible input power supplies\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eThe Arduino family of processors is a fabulous prototyping and building system for Makers. The combination of the Arduino IDE with its thousands of available drivers for sensors and the ATMega line of processors have spawned a tremendous burst of creativity around the world.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003eTo Use with Arduino IDE\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eSelect Arduino Mini Pro Plus and 16MHz\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(43759674687708, { variant: {"id":43759674687708,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0750-MINIPROPLUS-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grove Mini Pro Plus","public_title":null,"options":["Default Title"],"price":2000,"weight":85,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 4, product_id: 7973038588124, product_handle: "grove-mini-pro-plus", price: 2000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("lightning-detector-solar-powered-433mhz-wireless-sensor-weathersense", 6575536504999, {"id":6575536504999,"title":"Lightning Detector - Solar Powered 433MHz Wireless Sensor - WeatherSense","handle":"lightning-detector-solar-powered-433mhz-wireless-sensor-weathersense","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"Polaris-Page-Header__BreadcrumbWrapper_1tgwk\"\u003e\u003cnav role=\"navigation\"\u003e\u003cbr\u003e\u003c\/nav\u003e\u003c\/div\u003e\n\u003cdiv class=\"Polaris-Page-Header__TitleWrapper_bejfn\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"Polaris-Header-Title__TitleAndSubtitleWrapper_40sxf\"\u003e\n\u003cdiv class=\"Polaris-Header-Title__TitleWithMetadataWrapper_pdqv7\"\u003e\n\u003ch1 class=\"Polaris-Header-Title_2qj8j\"\u003eSolar Wireless Lightning Detection Sensor - WeatherSense\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/e9bbb153cc7604f5ffc479099377c095_original.JPG_1_480x480.jpg?v=1615842393\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan class=\"bold\"\u003eThese are kits that are easy to build and require \u003cstrong\u003eNO SOLDERING!\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e   You can do this easily with your kids. \u003cmeta charset=\"UTF-8\"\u003e100% \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eSkyWeather2\u003c\/a\u003e Compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eKa-boom.\u003c\/strong\u003e  We all know what thunder sounds like. \u003cstrong\u003e Crack.\u003c\/strong\u003e  We all know what lightning looks like.   How can we get our Raspberry Pi to see the lightning?   We do that with the new WeatherSense Lightning Detector.   The solar powered lightning detector sniffs out the lightning up to 30km (18.75 miles) away and reports it back to your Raspberry Pi safe inside the house using 433MHz radio technology.   This sophisticated sensor can detect the difference between local sources of EMF (Electro Magnetic Frequency) noise and the real bolts of lightning.   Why do we want it outside?   Because your house, monitors, phone, computers and the Raspberry Pi itself are sources of electrical noise that makes it harder for this sensitive lightning detector to do its job.   And we have designed the system to just sip  (Solar!) power and send back necessary reports to your Raspberry Pi for your display and analysis.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat is WeatherSense?\u003c\/h2\u003e\n\u003cp\u003eWeatherSense is an open source wireless protocol for sending information from remote sensors to your Raspberry Pi.  This kit comes with the software you need to receive the WeatherSense messages using your Raspberry Pi and Software Defined Radio (SDR).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/d753f4b01c165bd33f668e95958f26ad_original_png_480x480.jpg?v=1615842909\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSolar Powered Wireless WeatherSense Lightning Sensor Kit Contents\u003c\/h2\u003e\n\u003cp\u003eThis is the complete kit for the Wireless Lightning Sensor. Add ons to this kit include a SDR (Software Defined Radio) for your Raspberry Pi, a 3D Print, Lightning Simulator, and pre-loaded SD Card. Raspberry Pi is not included. A 3.7V LiPo Battery is not included.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Lightning Sensor Kit contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMini Pro Plus Arduino Compatible Low Power Computer\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e433MHz Transmitter Board with Inside Antenna\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eThunderBoard AS3935 Lightning Detector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e50cm Grove Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e330mA 6V Solar Power Cell\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSunAirPlus2 Solar Power Controller and Data Collector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e20cm Grove Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLinks to all Source Code\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cbr\u003eWhat else do you need to use these kits?\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" target=\"_blank\"\u003eCompatible Software Defined Radio\u003c\/a\u003e (We have one in stock but you can get one in many places on the network)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as \u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.adafruit.com\/product\/353\" target=\"_blank\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/a\u003e - if you get them off of Amazon, check the wiring most of them are wired backwards - Fully discussed in manuals. Here's a great website showing the problem: \u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" target=\"_blank\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWeatherSense Raspberry Pi Software\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h2\u003e\n\u003cp\u003eBut wait! There is more. The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi. You can download the software from github.com\/switchdoclabs or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.  See downloads below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eAll messages published on MQTT (topic: weathersense\/#)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WeatherSense software supports:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherCam (Coming soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd more WeatherSense sensors on the way!\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/02\/WeatherSenseLightningAssemblyAndTestManual1.1.pdf\" target=\"_blank\"\u003eStep-by-Step Lightning Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/03\/WeatherSenseLightningWeatherProofingManual1.1.pdf\" target=\"_blank\"\u003eStep-by-Step Lightning WeatherProofing and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arudino_WeatherSenseThunderBoard\" target=\"_blank\"\u003eArduino Open Source C\/C++ Software for the the Lightning Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\"\u003e3D Print STL Files for the Lightning Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\"\u003eRaspberry Pi WeatherSense Open Source Software for data collection and visualization\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2022\/12\/AS3935_Datasheet_EN_v2-3.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull spec for lightning board AS3935\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is a Software Defined Radio?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\"\u003e \u003c\/p\u003e\n\u003cp\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\"\u003e\u003cbr\u003e The SDR we are using with WeatherSense is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz. SwitchDoc Labs has written drivers for the WeatherSense sensors and supplies the drivers to the community open source. These are all available in a pre-built SD Card image. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eHow does the Lightning Detector work?\u003c\/h2\u003e\n\u003cp\u003eHow the heck do we detect lightning? You would think it would be pretty easy, but it turns out it is not. It's not just like a giant spark. Well, it is a giant spark, but there are lots of other things that make electrical noise that can be confused for lightning. Your computer (even your Raspberry PI and Arduino!), your car, the motor in your refrigerator, your cell phone, your computer monitor, your AM\/FM radio and even your TV. They all make electrical noise that can be confused with Lightning.\u003c\/p\u003e\n\u003cp\u003eThe Thunder Board detects Lightning and provides a distance estimate to the “leading edge” of an incoming storm. The phrase “leading edge” is a bit misleading, since it suggests that one is in the direct path of the storm. In fact, for the purposes of the Thunder Board, the leading edge is simply the closest edge of the storm, which may never actually arrive if the storm delivers a glancing blow nearby.\u003c\/p\u003e\n\u003cp\u003eHowever, its distance away from you – regardless of where it is heading – is the most relevant information. A lightning strike creates an electromagnetic pulse that can be detected using an external antenna tuned to 500 kHz, with a bandwidth of 33 kHz. An analog front-end (AFE) demodulates and amplifies the antenna signal, and a watchdog circuit alerts the lightning detector once an event crosses its threshold. However, numerous other electromagnetic events create high-energy events. It is important that such non-lightning “disturbers” not be misinterpreted as lightning – and vice versa.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/6dbada0e9150ad65b5e0ef943086bd1e_original_jpg_480x480.jpg?v=1615844545\"\u003e\u003c\/p\u003e\n\u003cp\u003eWe then decide whether the event has the characteristics of a lightning strike. If not, it is rejected as being the result of a disturber. If it decides that it is lightning, the energy of the event is calculated and stored, and then the storm distance is calculated based on that and prior events. An interrupt then completes the process so that the Arduino or Raspberry Pi can retrieve the information and take action.\u003c\/p\u003e\n\u003cp\u003eSounds like magic? It's not. But it is pretty cool that you can build a kit that does this.\u003c\/p\u003e\n\u003cp\u003eJohn has created a video explaining how the lightning detector works and how to tune it.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fTEEDfWbGEU\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","published_at":"2021-03-15T15:04:17-07:00","created_at":"2021-03-15T13:18:01-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Break Out Boards,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":10599,"price_min":10599,"price_max":10599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39416569462951,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0756-WSLIGHTNING-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Lightning Detector - Solar Powered 433MHz Wireless Sensor - WeatherSense","public_title":null,"options":["Default Title"],"price":10599,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e9bbb153cc7604f5ffc479099377c095_original.JPG_1.jpg?v=1615845844","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_119292f2-62a6-4b52-9dfe-e30bc7da57da.jpg?v=1615845844","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6dbada0e9150ad65b5e0ef943086bd1e_original_jpg.jpg?v=1615845844","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7e2ac84c6bf24a647e3edebb337f1833_original_png.jpg?v=1615845844","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png.jpg?v=1615845844","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/55cdc19369edde5f873f572cca717782_original_png.jpg?v=1615845844","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d753f4b01c165bd33f668e95958f26ad_original_png.jpg?v=1615845844"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e9bbb153cc7604f5ffc479099377c095_original.JPG_1.jpg?v=1615845844","options":["Title"],"media":[{"alt":null,"id":20499052986535,"position":1,"preview_image":{"aspect_ratio":1.333,"height":510,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e9bbb153cc7604f5ffc479099377c095_original.JPG_1.jpg?v=1615845844"},"aspect_ratio":1.333,"height":510,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/e9bbb153cc7604f5ffc479099377c095_original.JPG_1.jpg?v=1615845844","width":680},{"alt":null,"id":20499070222503,"position":2,"preview_image":{"aspect_ratio":1.333,"height":360,"width":480,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/hqdefault.jpg?v=1615845827"},"aspect_ratio":1.77,"external_id":"RLodr9EfGQo","host":"youtube","media_type":"external_video"},{"alt":null,"id":20499052789927,"position":3,"preview_image":{"aspect_ratio":1.563,"height":435,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_119292f2-62a6-4b52-9dfe-e30bc7da57da.jpg?v=1615845844"},"aspect_ratio":1.563,"height":435,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_119292f2-62a6-4b52-9dfe-e30bc7da57da.jpg?v=1615845844","width":680},{"alt":null,"id":20499052822695,"position":4,"preview_image":{"aspect_ratio":2.048,"height":293,"width":600,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6dbada0e9150ad65b5e0ef943086bd1e_original_jpg.jpg?v=1615845844"},"aspect_ratio":2.048,"height":293,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/6dbada0e9150ad65b5e0ef943086bd1e_original_jpg.jpg?v=1615845844","width":600},{"alt":null,"id":20499052855463,"position":5,"preview_image":{"aspect_ratio":3.009,"height":226,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7e2ac84c6bf24a647e3edebb337f1833_original_png.jpg?v=1615845844"},"aspect_ratio":3.009,"height":226,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7e2ac84c6bf24a647e3edebb337f1833_original_png.jpg?v=1615845844","width":680},{"alt":null,"id":20499052888231,"position":6,"preview_image":{"aspect_ratio":0.86,"height":791,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png.jpg?v=1615845844"},"aspect_ratio":0.86,"height":791,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png.jpg?v=1615845844","width":680},{"alt":null,"id":20499052920999,"position":7,"preview_image":{"aspect_ratio":0.783,"height":869,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/55cdc19369edde5f873f572cca717782_original_png.jpg?v=1615845844"},"aspect_ratio":0.783,"height":869,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/55cdc19369edde5f873f572cca717782_original_png.jpg?v=1615845844","width":680},{"alt":null,"id":20499052953767,"position":8,"preview_image":{"aspect_ratio":2.5,"height":130,"width":325,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d753f4b01c165bd33f668e95958f26ad_original_png.jpg?v=1615845844"},"aspect_ratio":2.5,"height":130,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d753f4b01c165bd33f668e95958f26ad_original_png.jpg?v=1615845844","width":325}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"Polaris-Page-Header__BreadcrumbWrapper_1tgwk\"\u003e\u003cnav role=\"navigation\"\u003e\u003cbr\u003e\u003c\/nav\u003e\u003c\/div\u003e\n\u003cdiv class=\"Polaris-Page-Header__TitleWrapper_bejfn\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"Polaris-Header-Title__TitleAndSubtitleWrapper_40sxf\"\u003e\n\u003cdiv class=\"Polaris-Header-Title__TitleWithMetadataWrapper_pdqv7\"\u003e\n\u003ch1 class=\"Polaris-Header-Title_2qj8j\"\u003eSolar Wireless Lightning Detection Sensor - WeatherSense\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/e9bbb153cc7604f5ffc479099377c095_original.JPG_1_480x480.jpg?v=1615842393\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan class=\"bold\"\u003eThese are kits that are easy to build and require \u003cstrong\u003eNO SOLDERING!\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e   You can do this easily with your kids. \u003cmeta charset=\"UTF-8\"\u003e100% \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eSkyWeather2\u003c\/a\u003e Compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eKa-boom.\u003c\/strong\u003e  We all know what thunder sounds like. \u003cstrong\u003e Crack.\u003c\/strong\u003e  We all know what lightning looks like.   How can we get our Raspberry Pi to see the lightning?   We do that with the new WeatherSense Lightning Detector.   The solar powered lightning detector sniffs out the lightning up to 30km (18.75 miles) away and reports it back to your Raspberry Pi safe inside the house using 433MHz radio technology.   This sophisticated sensor can detect the difference between local sources of EMF (Electro Magnetic Frequency) noise and the real bolts of lightning.   Why do we want it outside?   Because your house, monitors, phone, computers and the Raspberry Pi itself are sources of electrical noise that makes it harder for this sensitive lightning detector to do its job.   And we have designed the system to just sip  (Solar!) power and send back necessary reports to your Raspberry Pi for your display and analysis.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat is WeatherSense?\u003c\/h2\u003e\n\u003cp\u003eWeatherSense is an open source wireless protocol for sending information from remote sensors to your Raspberry Pi.  This kit comes with the software you need to receive the WeatherSense messages using your Raspberry Pi and Software Defined Radio (SDR).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/d753f4b01c165bd33f668e95958f26ad_original_png_480x480.jpg?v=1615842909\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSolar Powered Wireless WeatherSense Lightning Sensor Kit Contents\u003c\/h2\u003e\n\u003cp\u003eThis is the complete kit for the Wireless Lightning Sensor. Add ons to this kit include a SDR (Software Defined Radio) for your Raspberry Pi, a 3D Print, Lightning Simulator, and pre-loaded SD Card. Raspberry Pi is not included. A 3.7V LiPo Battery is not included.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Lightning Sensor Kit contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMini Pro Plus Arduino Compatible Low Power Computer\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e433MHz Transmitter Board with Inside Antenna\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eThunderBoard AS3935 Lightning Detector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e50cm Grove Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e330mA 6V Solar Power Cell\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSunAirPlus2 Solar Power Controller and Data Collector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e20cm Grove Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLinks to all Source Code\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cbr\u003eWhat else do you need to use these kits?\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" target=\"_blank\"\u003eCompatible Software Defined Radio\u003c\/a\u003e (We have one in stock but you can get one in many places on the network)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as \u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.adafruit.com\/product\/353\" target=\"_blank\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/a\u003e - if you get them off of Amazon, check the wiring most of them are wired backwards - Fully discussed in manuals. Here's a great website showing the problem: \u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" target=\"_blank\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWeatherSense Raspberry Pi Software\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h2\u003e\n\u003cp\u003eBut wait! There is more. The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi. You can download the software from github.com\/switchdoclabs or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.  See downloads below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eAll messages published on MQTT (topic: weathersense\/#)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WeatherSense software supports:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherCam (Coming soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd more WeatherSense sensors on the way!\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/02\/WeatherSenseLightningAssemblyAndTestManual1.1.pdf\" target=\"_blank\"\u003eStep-by-Step Lightning Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/03\/WeatherSenseLightningWeatherProofingManual1.1.pdf\" target=\"_blank\"\u003eStep-by-Step Lightning WeatherProofing and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arudino_WeatherSenseThunderBoard\" target=\"_blank\"\u003eArduino Open Source C\/C++ Software for the the Lightning Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\"\u003e3D Print STL Files for the Lightning Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\"\u003eRaspberry Pi WeatherSense Open Source Software for data collection and visualization\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2022\/12\/AS3935_Datasheet_EN_v2-3.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFull spec for lightning board AS3935\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is a Software Defined Radio?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\"\u003e \u003c\/p\u003e\n\u003cp\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\"\u003e\u003cbr\u003e The SDR we are using with WeatherSense is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz. SwitchDoc Labs has written drivers for the WeatherSense sensors and supplies the drivers to the community open source. These are all available in a pre-built SD Card image. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eHow does the Lightning Detector work?\u003c\/h2\u003e\n\u003cp\u003eHow the heck do we detect lightning? You would think it would be pretty easy, but it turns out it is not. It's not just like a giant spark. Well, it is a giant spark, but there are lots of other things that make electrical noise that can be confused for lightning. Your computer (even your Raspberry PI and Arduino!), your car, the motor in your refrigerator, your cell phone, your computer monitor, your AM\/FM radio and even your TV. They all make electrical noise that can be confused with Lightning.\u003c\/p\u003e\n\u003cp\u003eThe Thunder Board detects Lightning and provides a distance estimate to the “leading edge” of an incoming storm. The phrase “leading edge” is a bit misleading, since it suggests that one is in the direct path of the storm. In fact, for the purposes of the Thunder Board, the leading edge is simply the closest edge of the storm, which may never actually arrive if the storm delivers a glancing blow nearby.\u003c\/p\u003e\n\u003cp\u003eHowever, its distance away from you – regardless of where it is heading – is the most relevant information. A lightning strike creates an electromagnetic pulse that can be detected using an external antenna tuned to 500 kHz, with a bandwidth of 33 kHz. An analog front-end (AFE) demodulates and amplifies the antenna signal, and a watchdog circuit alerts the lightning detector once an event crosses its threshold. However, numerous other electromagnetic events create high-energy events. It is important that such non-lightning “disturbers” not be misinterpreted as lightning – and vice versa.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/6dbada0e9150ad65b5e0ef943086bd1e_original_jpg_480x480.jpg?v=1615844545\"\u003e\u003c\/p\u003e\n\u003cp\u003eWe then decide whether the event has the characteristics of a lightning strike. If not, it is rejected as being the result of a disturber. If it decides that it is lightning, the energy of the event is calculated and stored, and then the storm distance is calculated based on that and prior events. An interrupt then completes the process so that the Arduino or Raspberry Pi can retrieve the information and take action.\u003c\/p\u003e\n\u003cp\u003eSounds like magic? It's not. But it is pretty cool that you can build a kit that does this.\u003c\/p\u003e\n\u003cp\u003eJohn has created a video explaining how the lightning detector works and how to tune it.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fTEEDfWbGEU\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(39416569462951, { variant: {"id":39416569462951,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0756-WSLIGHTNING-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Lightning Detector - Solar Powered 433MHz Wireless Sensor - WeatherSense","public_title":null,"options":["Default Title"],"price":10599,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 6575536504999, product_handle: "lightning-detector-solar-powered-433mhz-wireless-sensor-weathersense", price: 10599, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("grove-air-quality-sensor-1", 935696826412, {"id":935696826412,"title":"Grove Air Quality Sensor","handle":"grove-air-quality-sensor-1","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003eGrove Air Quality Sensor\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThis sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with a 5V and 3.3V power supply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/air-quality-sensor-tested-raspberry-pi\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eCheck out this article about the Air Quality Sensor.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eHigh sensitivity\u003c\/li\u003e\n\u003cli\u003eResponsive to a wide scope of target gases\u003c\/li\u003e\n\u003cli\u003eCost efficient\u003c\/li\u003e\n\u003cli\u003eDurable\u003c\/li\u003e\n\u003cli\u003eCompatible with 5V and 3.3V\u003c\/li\u003e\n\u003cli\u003eSpecification:\u003c\/li\u003e\n\u003cli\u003eSensor: Winsen MP503\u003c\/li\u003e\n\u003cli\u003eDimension: 40x20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"the-icons\"\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRaspberry Pi, Arduino and ESP8266 Software Provided\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eHow does this Sensor work?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Air Quality Sensor works by measuring a wide scope of harmful gases such as carbon monixide, alcohol, acetone, thinner, formaldehyde and so on as well as being sensitive to particulate count. Due to the method used to measure the contaminants, this Air Quality sensor can not output specific data to describe target gases' concentrations quantitatively. But it's still good enough to be used to describe qualitative air quality. \u003cstrong\u003eThe Air Quality sensor requires a warm up time of about 2 minutes after power on before it will be reporting good data.\u003c\/strong\u003e The Air Quality sensor is based on a Winsen MP503 Air-Quality Gas Sensor. This sensor is designed for indoor use but can be used outdoors if it is covered and protected from high humidity. \u003cstrong\u003eDo not use any silicon based spray or lubricant products around the Air Quality sensor. Use of those products will rapidly reduce the sensitivity of the sensor.\u003c\/strong\u003e This unit requires relativity clean air conditions when starting up. When testing the sensor by using the cardboard box and hair spray test setup, do not spray the hairspray directly on the sensor. Spray it in the air around the sensor. It does not take much hairspray! The analog voltage from the Air Quality sensor is converted by the SwitchDoc Labs Analog to Digital Converter into a 16 bit value and converted into a qualitative gauge of the air quality. See these values below.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat Does the Air Quality Sensor Report?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe AirQuailty sensor reports a single analog voltage describing the overall air quality. We take this analog value and convert it to a digital reading (from 0 to about 65000 - depending on the number of the bits of ADC you are using). Following is digital reading and the qualitative interpretation:\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-3738 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_Screen-Shot-2016-04-18-at-5.26.29-PM.png?13930894399505050369\" alt=\"Screen Shot 2016-04-18 at 5.26.29 PM\" width=\"613\" height=\"186\"\u003e\u003c\/p\u003e\n\u003cp\u003eIDownloads\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe complete specification for the \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/01\/Mp503.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMP503 is here\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_AirQualitySensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Python Software\u003c\/a\u003e - requires a Grove ADC\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_AirQualitySensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_AirQualitySensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Software\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eRaspberry Pi Output\u003c\/h2\u003e\n\u003cpre\u003e------------------------------\nSensor Value=1575 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1576 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1582 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1578 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1579 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1575 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1572 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1572 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1571 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1570 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1572 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1569 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1567 --\u0026gt; Fresh Air | 4\n\u003c\/pre\u003e\n\u003ch2\u003eArduino Output\u003c\/h2\u003e\n\u003cpre\u003e------------------------------\nad0=1558\nSensor_Value=1558---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1551\nSensor_Value=1551---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1544\nSensor_Value=1544---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1538\nSensor_Value=1538---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1532\nSensor_Value=1532---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1527\nSensor_Value=1527---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1521\nSensor_Value=1521---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1516\nSensor_Value=1516---\u0026gt;Fresh Air\ncurrentAirQuality=4\n\u003c\/pre\u003e","published_at":"2017-10-19T21:16:54-07:00","created_at":"2018-05-23T14:06:12-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Weather,Grove,Sensors,Raspberry Pi,Arduino,ESP8266,I2C,Full Kits","tags":[],"price":2195,"price_min":2195,"price_max":2195,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9403783774252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0090-GRVAQS-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Air Quality Sensor","public_title":null,"options":["Default Title"],"price":2195,"weight":28,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7139lI6H7YL._SL1080.jpg?v=1527110581","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/41ppU9UEujL.jpg?v=1527110581","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/41vqTpE3f7L_b69ec511-8419-4450-9b5a-c68894013fca.jpg?v=1527110581","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51Lm2u7xa-L.jpg?v=1527110581"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7139lI6H7YL._SL1080.jpg?v=1527110581","options":["Title"],"media":[{"alt":null,"id":1522421956652,"position":1,"preview_image":{"aspect_ratio":0.961,"height":1080,"width":1038,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7139lI6H7YL._SL1080.jpg?v=1527110581"},"aspect_ratio":0.961,"height":1080,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7139lI6H7YL._SL1080.jpg?v=1527110581","width":1038},{"alt":null,"id":1522415075372,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/41ppU9UEujL.jpg?v=1527110581"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/41ppU9UEujL.jpg?v=1527110581","width":500},{"alt":null,"id":1522415173676,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/41vqTpE3f7L_b69ec511-8419-4450-9b5a-c68894013fca.jpg?v=1527110581"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/41vqTpE3f7L_b69ec511-8419-4450-9b5a-c68894013fca.jpg?v=1527110581","width":500},{"alt":null,"id":1522414911532,"position":4,"preview_image":{"aspect_ratio":1.449,"height":345,"width":500,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51Lm2u7xa-L.jpg?v=1527110581"},"aspect_ratio":1.449,"height":345,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51Lm2u7xa-L.jpg?v=1527110581","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003eGrove Air Quality Sensor\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThis sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with a 5V and 3.3V power supply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2016\/06\/air-quality-sensor-tested-raspberry-pi\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eCheck out this article about the Air Quality Sensor.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eHigh sensitivity\u003c\/li\u003e\n\u003cli\u003eResponsive to a wide scope of target gases\u003c\/li\u003e\n\u003cli\u003eCost efficient\u003c\/li\u003e\n\u003cli\u003eDurable\u003c\/li\u003e\n\u003cli\u003eCompatible with 5V and 3.3V\u003c\/li\u003e\n\u003cli\u003eSpecification:\u003c\/li\u003e\n\u003cli\u003eSensor: Winsen MP503\u003c\/li\u003e\n\u003cli\u003eDimension: 40x20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"the-icons\"\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRaspberry Pi, Arduino and ESP8266 Software Provided\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eHow does this Sensor work?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Air Quality Sensor works by measuring a wide scope of harmful gases such as carbon monixide, alcohol, acetone, thinner, formaldehyde and so on as well as being sensitive to particulate count. Due to the method used to measure the contaminants, this Air Quality sensor can not output specific data to describe target gases' concentrations quantitatively. But it's still good enough to be used to describe qualitative air quality. \u003cstrong\u003eThe Air Quality sensor requires a warm up time of about 2 minutes after power on before it will be reporting good data.\u003c\/strong\u003e The Air Quality sensor is based on a Winsen MP503 Air-Quality Gas Sensor. This sensor is designed for indoor use but can be used outdoors if it is covered and protected from high humidity. \u003cstrong\u003eDo not use any silicon based spray or lubricant products around the Air Quality sensor. Use of those products will rapidly reduce the sensitivity of the sensor.\u003c\/strong\u003e This unit requires relativity clean air conditions when starting up. When testing the sensor by using the cardboard box and hair spray test setup, do not spray the hairspray directly on the sensor. Spray it in the air around the sensor. It does not take much hairspray! The analog voltage from the Air Quality sensor is converted by the SwitchDoc Labs Analog to Digital Converter into a 16 bit value and converted into a qualitative gauge of the air quality. See these values below.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat Does the Air Quality Sensor Report?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe AirQuailty sensor reports a single analog voltage describing the overall air quality. We take this analog value and convert it to a digital reading (from 0 to about 65000 - depending on the number of the bits of ADC you are using). Following is digital reading and the qualitative interpretation:\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-3738 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/t\/8\/assets\/description_image_Screen-Shot-2016-04-18-at-5.26.29-PM.png?13930894399505050369\" alt=\"Screen Shot 2016-04-18 at 5.26.29 PM\" width=\"613\" height=\"186\"\u003e\u003c\/p\u003e\n\u003cp\u003eIDownloads\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe complete specification for the \u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2016\/01\/Mp503.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMP503 is here\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_AirQualitySensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Python Software\u003c\/a\u003e - requires a Grove ADC\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_AirQualitySensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eArduino Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP8266_AirQualitySensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP8266 Software\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eRaspberry Pi Output\u003c\/h2\u003e\n\u003cpre\u003e------------------------------\nSensor Value=1575 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1576 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1582 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1578 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1579 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1575 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1572 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1572 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1571 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1570 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1572 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1569 --\u0026gt; Fresh Air | 4\n------------------------------\nSensor Value=1567 --\u0026gt; Fresh Air | 4\n\u003c\/pre\u003e\n\u003ch2\u003eArduino Output\u003c\/h2\u003e\n\u003cpre\u003e------------------------------\nad0=1558\nSensor_Value=1558---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1551\nSensor_Value=1551---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1544\nSensor_Value=1544---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1538\nSensor_Value=1538---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1532\nSensor_Value=1532---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1527\nSensor_Value=1527---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1521\nSensor_Value=1521---\u0026gt;Fresh Air\ncurrentAirQuality=4\n------------------------------\nad0=1516\nSensor_Value=1516---\u0026gt;Fresh Air\ncurrentAirQuality=4\n\u003c\/pre\u003e"});window.BOLD.common.Shopify.saveVariant(9403783774252, { variant: {"id":9403783774252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0090-GRVAQS-DSBT","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Grove Air Quality Sensor","public_title":null,"options":["Default Title"],"price":2195,"weight":28,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 935696826412, product_handle: "grove-air-quality-sensor-1", price: 2195, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("arduino-iot-lightning-detector-kit", 434814451750, {"id":434814451750,"title":"Arduino IOT Lightning Detector Kit","handle":"arduino-iot-lightning-detector-kit","description":"\u003ch1\u003eArduino IOT Lightning Detector Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThe Thunder Board Arduino IOT kit comes with everything you need to build your first IOT kit.   It works locally right out of the box with the software already installed on the Arduino Mini Pro LP included in the kit.  If you want to talk to the Freeboard Internet Dashboard, there are another set of steps to take to get your Thunder Board connected up to your WiFi and then securely up on the Internet.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Arduino IOT Lightning Detector Kit contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrove Mini Pro LP Arduino (16MHz)\u003c\/li\u003e\n\u003cli\u003eGrove WiFi Interface\u003c\/li\u003e\n\u003cli\u003eGrove LCD Display\u003c\/li\u003e\n\u003cli\u003eGrove Buzzer\u003c\/li\u003e\n\u003cli\u003eThe Thunder Board\u003c\/li\u003e\n\u003cli\u003eGrove Cables for Hooking it Up!\u003c\/li\u003e\n\u003cli\u003eUSB Cable for Power\u003c\/li\u003e\n\u003cli\u003eFTDI Cable for Programming\u003c\/li\u003e\n\u003cli\u003e3D Printing Files (here in downloads)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNew Tutorial\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe 3D Print Codes:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eThe software:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoard_IOT\" rel=\"nofollow\" target=\"_blank\"\u003egithub.com\/switchdoclabs\/SDL_Arduino_ThunderBoard_IOT\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Readme:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ccode data-root-container=\"true\" data-content-container=\"true\"\u003eSwitchDoc Labs Thunder Board IOT\u003cbr\u003eNovember 2017\u003cbr\u003e\u003cbr\u003eAll documentation for this board is on the SwitchDoc Labs site.\u003cbr\u003e\u003cbr\u003eVersion 004ARD - Initial Release - December 1, 2017 \u003cbr\u003eVersion 004ARD - Added JSON for Freeboard dashboard Release - December 2, 2017 \u003cbr\u003e\u003cbr\u003eInstallation\u003cbr\u003e\u003cbr\u003eCopy WiFiEsp.zip over to your libraries directory under your Arduino directory and unzip\u003cbr\u003e\u003cbr\u003eIf you are missing the \"TimeLib.h\" library, copy Time.zip into the Arduino libraries directory and unzip\u003c\/code\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e------\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Wiring list and product identification picture.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/03\/ArduinoIOTWiringList.pdf\" target=\"_blank\"\u003e\u003cspan\u003eArduino Wiring List.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5199_large.JPG?v=1520477087\" alt=\"\"\u003e \u003c\/h2\u003e\n\u003ch1 id=\"h:what-is-the-iot\"\u003e\u003cb\u003eWhat is the IOT?\u003c\/b\u003e\u003c\/h1\u003e\n\u003cp\u003ePut simply, the IOT is about connecting Internet Enabled devices the relay information back to us, to cloud based applications and dashboards and to each other.   These smart devices can be anything from computers, to thermostats, to refrigerators, mobile phones, cars or even big things like jet engines.\u003c\/p\u003e\n\u003cp\u003eThe Thunder Board IOT kit detects lightning, displays it to your local OLED display and then sends it up to your own Internet Dashboard so others can see what is going on with your location.   The Thunder Board IOT kit also detects:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eLightning Strength\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLightning Count\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLightning Distance\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eDisturber (Electrical Noise) Detection\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePretty cool.  And you can add more sensors to sense other things like sunlight, wind speed, direction, rain, etc.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch1 id=\"h:detecting-lightning\"\u003eDetecting Lightning with the Thunder Kit\u003c\/h1\u003e\n\u003cp\u003eHow the heck do we detect lightning?  You would think it would be pretty easy, but it turns out it is not.   It's not just like a giant spark.   Well, it is a giant spark, but there are lots of other things that make electrical noise that can be confused for lightning.  Your computer (even your Raspberry PI and Arduino!), your car, the motor in your refrigerator, your cell phone, your computer monitor, your AM\/FM radio and even your TV.  They all make electrical noise that can be confused with Lightning.\u003c\/p\u003e","published_at":"2018-03-07T18:43:06-08:00","created_at":"2017-12-09T18:23:55-08:00","vendor":"SwitchDoc Labs","type":"full kits, arduino","tags":["arduino"],"price":8500,"price_min":8500,"price_max":8500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":5857694384166,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0312-ARDTBIOT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino IOT Lightning Detector Kit","public_title":null,"options":["Default Title"],"price":8500,"weight":227,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728488","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/705b18451abea97919a6a5910f063402_original.JPG?v=1520477087","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5199.JPG?v=1520477087","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/acdc20283c3ff7f09ba315569bfd5e66_original.JPG?v=1520477087","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/bade0969eb09b252107c266dd8e7bff6_original.JPG?v=1520477087","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4115.JPG?v=1520477087","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ThunderboardIOT.png?v=1531927528"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/705b18451abea97919a6a5910f063402_original.JPG?v=1520477087","options":["Title"],"media":[{"alt":null,"id":883410239532,"position":1,"preview_image":{"aspect_ratio":1.333,"height":510,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/705b18451abea97919a6a5910f063402_original.JPG?v=1520477087"},"aspect_ratio":1.333,"height":510,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/705b18451abea97919a6a5910f063402_original.JPG?v=1520477087","width":680},{"alt":null,"id":1083603255340,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1500,"width":2000,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5199.JPG?v=1520477087"},"aspect_ratio":1.333,"height":1500,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5199.JPG?v=1520477087","width":2000},{"alt":null,"id":883410272300,"position":3,"preview_image":{"aspect_ratio":1.064,"height":639,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/acdc20283c3ff7f09ba315569bfd5e66_original.JPG?v=1520477087"},"aspect_ratio":1.064,"height":639,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/acdc20283c3ff7f09ba315569bfd5e66_original.JPG?v=1520477087","width":680},{"alt":null,"id":883410305068,"position":4,"preview_image":{"aspect_ratio":1.333,"height":510,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/bade0969eb09b252107c266dd8e7bff6_original.JPG?v=1520477087"},"aspect_ratio":1.333,"height":510,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/bade0969eb09b252107c266dd8e7bff6_original.JPG?v=1520477087","width":680},{"alt":null,"id":883410337836,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4115.JPG?v=1520477087"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4115.JPG?v=1520477087","width":1080},{"alt":null,"id":1683739017260,"position":6,"preview_image":{"aspect_ratio":1.28,"height":2026,"width":2594,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ThunderboardIOT.png?v=1531927528"},"aspect_ratio":1.28,"height":2026,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ThunderboardIOT.png?v=1531927528","width":2594}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eArduino IOT Lightning Detector Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThe Thunder Board Arduino IOT kit comes with everything you need to build your first IOT kit.   It works locally right out of the box with the software already installed on the Arduino Mini Pro LP included in the kit.  If you want to talk to the Freeboard Internet Dashboard, there are another set of steps to take to get your Thunder Board connected up to your WiFi and then securely up on the Internet.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Arduino IOT Lightning Detector Kit contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrove Mini Pro LP Arduino (16MHz)\u003c\/li\u003e\n\u003cli\u003eGrove WiFi Interface\u003c\/li\u003e\n\u003cli\u003eGrove LCD Display\u003c\/li\u003e\n\u003cli\u003eGrove Buzzer\u003c\/li\u003e\n\u003cli\u003eThe Thunder Board\u003c\/li\u003e\n\u003cli\u003eGrove Cables for Hooking it Up!\u003c\/li\u003e\n\u003cli\u003eUSB Cable for Power\u003c\/li\u003e\n\u003cli\u003eFTDI Cable for Programming\u003c\/li\u003e\n\u003cli\u003e3D Printing Files (here in downloads)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNew Tutorial\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/2018\/07\/tutorial-tuning-as3935-lightning-detector\/\" target=\"_blank\"\u003eHere is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe 3D Print Codes:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eThe software:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_ThunderBoard_IOT\" rel=\"nofollow\" target=\"_blank\"\u003egithub.com\/switchdoclabs\/SDL_Arduino_ThunderBoard_IOT\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Readme:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ccode data-root-container=\"true\" data-content-container=\"true\"\u003eSwitchDoc Labs Thunder Board IOT\u003cbr\u003eNovember 2017\u003cbr\u003e\u003cbr\u003eAll documentation for this board is on the SwitchDoc Labs site.\u003cbr\u003e\u003cbr\u003eVersion 004ARD - Initial Release - December 1, 2017 \u003cbr\u003eVersion 004ARD - Added JSON for Freeboard dashboard Release - December 2, 2017 \u003cbr\u003e\u003cbr\u003eInstallation\u003cbr\u003e\u003cbr\u003eCopy WiFiEsp.zip over to your libraries directory under your Arduino directory and unzip\u003cbr\u003e\u003cbr\u003eIf you are missing the \"TimeLib.h\" library, copy Time.zip into the Arduino libraries directory and unzip\u003c\/code\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e------\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Wiring list and product identification picture.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.switchdoc.com\/wp-content\/uploads\/2018\/03\/ArduinoIOTWiringList.pdf\" target=\"_blank\"\u003e\u003cspan\u003eArduino Wiring List.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\n\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_5199_large.JPG?v=1520477087\" alt=\"\"\u003e \u003c\/h2\u003e\n\u003ch1 id=\"h:what-is-the-iot\"\u003e\u003cb\u003eWhat is the IOT?\u003c\/b\u003e\u003c\/h1\u003e\n\u003cp\u003ePut simply, the IOT is about connecting Internet Enabled devices the relay information back to us, to cloud based applications and dashboards and to each other.   These smart devices can be anything from computers, to thermostats, to refrigerators, mobile phones, cars or even big things like jet engines.\u003c\/p\u003e\n\u003cp\u003eThe Thunder Board IOT kit detects lightning, displays it to your local OLED display and then sends it up to your own Internet Dashboard so others can see what is going on with your location.   The Thunder Board IOT kit also detects:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eLightning Strength\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLightning Count\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLightning Distance\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eDisturber (Electrical Noise) Detection\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePretty cool.  And you can add more sensors to sense other things like sunlight, wind speed, direction, rain, etc.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch1 id=\"h:detecting-lightning\"\u003eDetecting Lightning with the Thunder Kit\u003c\/h1\u003e\n\u003cp\u003eHow the heck do we detect lightning?  You would think it would be pretty easy, but it turns out it is not.   It's not just like a giant spark.   Well, it is a giant spark, but there are lots of other things that make electrical noise that can be confused for lightning.  Your computer (even your Raspberry PI and Arduino!), your car, the motor in your refrigerator, your cell phone, your computer monitor, your AM\/FM radio and even your TV.  They all make electrical noise that can be confused with Lightning.\u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(5857694384166, { variant: {"id":5857694384166,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0312-ARDTBIOT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino IOT Lightning Detector Kit","public_title":null,"options":["Default Title"],"price":8500,"weight":227,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728488","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 434814451750, product_handle: "arduino-iot-lightning-detector-kit", price: 8500, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("skyweather2-replacement-hat", 7959418929372, {"id":7959418929372,"title":"SkyWeather2 Replacement Hat","handle":"skyweather2-replacement-hat","description":"This a replacement plug in Raspberry Pi Hat for the SkyWeather2 Product.","published_at":"2023-01-16T12:28:05-08:00","created_at":"2023-01-16T12:28:03-08:00","vendor":"SwitchDoc Labs","type":"Shop All,Grove,Sensors,Raspberry Pi,Arduino,ESP8266","tags":[],"price":1995,"price_min":1995,"price_max":1995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43732643938524,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SkyWeather2 Replacement Hat","public_title":null,"options":["Default Title"],"price":1995,"weight":45,"compare_at_price":null,"inventory_quantity":75,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SKyWeather2BoardAnno_181c07fc-6955-4302-bffa-ddd6a9655bcb.jpg?v=1673900886","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5778.jpg?v=1673900886"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SKyWeather2BoardAnno_181c07fc-6955-4302-bffa-ddd6a9655bcb.jpg?v=1673900886","options":["Title"],"media":[{"alt":null,"id":31140596973788,"position":1,"preview_image":{"aspect_ratio":1.574,"height":1715,"width":2700,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SKyWeather2BoardAnno_181c07fc-6955-4302-bffa-ddd6a9655bcb.jpg?v=1673900886"},"aspect_ratio":1.574,"height":1715,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SKyWeather2BoardAnno_181c07fc-6955-4302-bffa-ddd6a9655bcb.jpg?v=1673900886","width":2700},{"alt":null,"id":31140597006556,"position":2,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5778.jpg?v=1673900886"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_5778.jpg?v=1673900886","width":4032}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"This a replacement plug in Raspberry Pi Hat for the SkyWeather2 Product."});window.BOLD.common.Shopify.saveVariant(43732643938524, { variant: {"id":43732643938524,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SkyWeather2 Replacement Hat","public_title":null,"options":["Default Title"],"price":1995,"weight":45,"compare_at_price":null,"inventory_quantity":75,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 75, product_id: 7959418929372, product_handle: "skyweather2-replacement-hat", price: 1995, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("solar-skycam-weathersense", 6969774178471, {"id":6969774178471,"title":"Solar SkyCam - WeatherSense","handle":"solar-skycam-weathersense","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"4r2vv-0-0\"\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4r2vv-0-0\"\u003eSolar SkyCam is a great addition to your SkyWeather2 weather system or to your WeatherSense sensors.   It provides a solar powered camera and transmits the picture to the Raspberry Pi.   The Raspberry Pi builds a daily TimeLapse video and stores the pictures on the Raspberry Pi.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4r2vv-0-0\"\u003eHaving a SkyCam in your SkyWeather2 system means you can keep the Raspberry Pi inside your house and don't have to mount it outside.   Both the internal Pi camera on SkyWeather2 and multiple SkyCams are supported at the same time.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003cimg height=\"312\" width=\"441\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/279\/198\/5f7e873feec0de5de3b6a2c58339c235_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626886657\u0026amp;frame=1\u0026amp;s=3ff25462f78bbf6ea5df171fb9170fa0\" alt=\"SkyCam Block Diagram\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/279\/198\/5f7e873feec0de5de3b6a2c58339c235_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626886657\u0026amp;frame=1\u0026amp;s=3ff25462f78bbf6ea5df171fb9170fa0\" data-mce-selected=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003eSkyCam\u003c\/span\u003e\u003cspan data-offset-key=\"4r2vv-0-1\"\u003e can be used stand alone supplying data to your Raspberry Pi or you can connect with the SkyWeather2 weather station to get even more local environmental information.  You can even have multiple Solar SkyCams running on the same network!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1bikr-0-0\"\u003eAnd as always, easy to put together with NO SOLDERING! \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1bikr-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1bikr-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2 data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1bikr-0-0\"\u003eDownloads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/08\/SkyCamAssemblyAndTestManual1.1.pdf\" target=\"_blank\"\u003e SkyCam Assembly and Operations Manual\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\"\u003eRaspberry Pi WeatherSense Software\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_WeatherSenseSkyCam\"\u003eArduino IDE ESP32 Code for SkyCam\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_SolarSkyCam\"\u003e3D Prints Files for SkyCam\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/3d-print-for-weathersense-skycam\"\u003eIf you want to buy a 3D Print, you can find it here.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1bikr-0-0\"\u003eArticles about SkyCam\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2022\/04\/tutorial-changing-mqtt-server-ip-skycam\/\" target=\"_blank\"\u003eTutorial:  Changing MQTT Server IP on Solar SkyCam\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/08\/tutorial-adding-more-solar-panels-to-skycam-and-weathersense-sensors\/\" target=\"_blank\"\u003eAdding more Solar Panels to SkyCam and other WeatherSense Sensors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/08\/time-lapse-videos-on-skyweather2\/\" target=\"_blank\"\u003eTIme Lapse video with SkyCam\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1bikr-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cdiv data-offset-key=\"2odq0-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2odq0-0-0\"\u003e\u003cspan data-offset-key=\"2odq0-0-0\"\u003eThis is the way the SkyCam system works.   The ESP32 wakes up every minute (programmable) and takes a picture.  It then transmits the picture to the Rapsberry Pi using an MQTT reliable data connection in pieces (chunks!) that are reassembled and checked as the full picture on the Raspberry Pi.   The ESP32 then throttles down the CPU and goes to sleep until the next picture to save power.  Meanwhile, the SunAirPlus3  board is monitoring the solar panel and battery to keep things up and charged safely for your LiPo battery.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2odq0-0-0\"\u003e\n\u003cspan data-offset-key=\"2odq0-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"8c981-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8c981-0-0\"\u003e\u003cspan data-offset-key=\"8c981-0-0\"\u003eThe Raspberry Pi then takes the picture and puts it in a MySQL database for later use and then records all the glorious data from the Solar Power system on SkyCam for later analysis and graphing.  More Data! More Data! More Data!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dnhs5-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dnhs5-0-0\"\u003e\u003cspan data-offset-key=\"dnhs5-0-0\"\u003eThe Raspberry Pi then updates the included Dash App (local display) and every morning at 5am builds a new Time Lapse for your enjoyment (Excuse the lawn sprinklers going off in a few places!)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5s9jn-0-0\"\u003e\n\u003cdiv data-offset-key=\"5s9jn-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"5s9jn-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"bells-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"SkyCam Scanning the Sky\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/235\/ffd89bb610abf57c0ce2c2c1440802e9_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626989665\u0026amp;frame=1\u0026amp;s=8c600512ca003956ef780b3e6faab87b\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSkyCam Scanning the Sky\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9oa1v-0-0\"\u003e\n\u003cdiv data-offset-key=\"9oa1v-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"9oa1v-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"b374c-0-0\"\u003e\n\u003cdiv data-offset-key=\"b374c-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"b374c-0-0\"\u003eThese are kits that are easy to build and require NO SOLDERING!\u003c\/span\u003e\u003cspan data-offset-key=\"b374c-0-1\"\u003e   You can do this easily with your kids.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"703gu-0-0\"\u003e\n\u003cdiv data-offset-key=\"703gu-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"703gu-0-0\"\u003eSkyCam is a\u003c\/span\u003e\u003cspan data-offset-key=\"703gu-0-1\"\u003e great\u003c\/span\u003e\u003cspan data-offset-key=\"703gu-0-2\"\u003e way to learn about modern small computers and about the fantastic Raspberry Pi by yourself or with your kids!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"703gu-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"cf8h3-0-0\"\u003e\n\u003cdiv data-offset-key=\"cf8h3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"cf8h3-0-0\"\u003eBy the way, do you have interesting things around your home or school?  You can add multiple SkyCams to your system to see \u003c\/span\u003e\u003cspan data-offset-key=\"cf8h3-0-1\"\u003eEVERTHING!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"cf8h3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"cf8h3-0-1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"cf8h3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003ch3 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ad2fa-0-0\"\u003e\u003cspan data-offset-key=\"ad2fa-0-0\"\u003eWhat is Included in the Kit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv data-offset-key=\"3fdgk-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3fdgk-0-0\"\u003e\n\u003cspan data-offset-key=\"3fdgk-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"28sgs-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/420\/012db72c43821a1e9af9bbf5cd3e806c_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991014\u0026amp;frame=1\u0026amp;s=b56989050b2656926ab1af7ac1cc3450\" role=\"presentation\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"escqp-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"escqp-0-0\"\u003e\n\u003cspan data-offset-key=\"escqp-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3via7-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3via7-0-0\"\u003e\u003cspan data-offset-key=\"3via7-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"fj5in-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fj5in-0-0\"\u003e\u003cspan data-offset-key=\"fj5in-0-0\"\u003eThis is the complete kit for the Solar SkyCam. Add on extras include small hardware assembly parts, a precut crystal window, a 3D Print and pre-loaded SD Card. Raspberry Pi is not included.   A 3.7V LiPo Battery is not included.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2attm-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2attm-0-0\"\u003e\u003cspan data-offset-key=\"2attm-0-0\"\u003eThe SkyCam Kit contains:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul data-offset-key=\"3cq8c-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"3cq8c-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3cq8c-0-0\"\u003e\u003cspan data-offset-key=\"3cq8c-0-0\"\u003eSunAirPlus2 or SunAirPlus3 Solar Controller and Data Collector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"b96ra-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"b96ra-0-0\"\u003e\u003cspan data-offset-key=\"b96ra-0-0\"\u003e330mA 6V Solar Power panel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"dqv6c-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dqv6c-0-0\"\u003e\u003cspan data-offset-key=\"dqv6c-0-0\"\u003eESP32 base OV2640 camera\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"97e1b-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"97e1b-0-0\"\u003e\u003cspan data-offset-key=\"97e1b-0-0\"\u003eUSB to Serial Interface Board\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"80que-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"80que-0-0\"\u003e\u003cspan data-offset-key=\"80que-0-0\"\u003eGrove ESP32 Cam Interface\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"ei3jo-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ei3jo-0-0\"\u003e\u003cspan data-offset-key=\"ei3jo-0-0\"\u003eHDC1080 Internal Temperature and Humidity Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"fne6h-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fne6h-0-0\"\u003e\u003cspan data-offset-key=\"fne6h-0-0\"\u003e2 -20cm Grove Cables\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"5v1ra-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5v1ra-0-0\"\u003e\u003cspan data-offset-key=\"5v1ra-0-0\"\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"fitm9-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fitm9-0-0\"\u003e\u003cspan data-offset-key=\"fitm9-0-0\"\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"6c334-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6c334-0-0\"\u003e\u003cspan data-offset-key=\"6c334-0-0\"\u003eLinks to all Source Code\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"aqs4i-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aqs4i-0-0\"\u003e\u003cspan data-offset-key=\"aqs4i-0-0\"\u003eLinks to 3D Prints STL and Design Files\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"8t2st-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8t2st-0-0\"\u003e\n\u003cspan data-offset-key=\"8t2st-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"fu493-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/486\/2b9a4b096437afb6782e1ccae82a9d33_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991464\u0026amp;frame=1\u0026amp;s=0ce4bd67985af6e91f626bf06685c07a\" alt=\"The Full Stack of the Camera Assembly\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe Full Stack of the Camera Assembly\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"95dpo-0-0\"\u003e\n\u003cdiv data-offset-key=\"95dpo-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"95dpo-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"f4asj-0-0\"\u003e\n\u003cdiv data-offset-key=\"f4asj-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"f4asj-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"6caqn-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"Inside SkyCam!\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/540\/48944a85ada7f9e7ab5e2369d6b6646d_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991910\u0026amp;frame=1\u0026amp;s=5a40385836af981ef297d92964b33739\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eInside SkyCam!\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"1rhhd-0-0\"\u003e\n\u003cdiv data-offset-key=\"1rhhd-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1rhhd-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"cjaj3-0-0\"\u003e\n\u003cdiv data-offset-key=\"cjaj3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"cjaj3-0-0\"\u003eComes with great open source software for the Rapsberry Pi,\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-1\"\u003e as well as all the open source Arduino ID C\/C++ for the ESP32 in the SkyCam\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-2\"\u003e!  \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-3\"\u003eAll of this  great data is saved by your Raspberry Pi receiving this data using the built in WiFi.  The Raspberry Pi stores all the pictures and information about how your solar power system is performing \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-4\"\u003e(this is GREAT data to look at with your students, educators!)\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-5\"\u003e  More coolness.   And these are \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-6\"\u003esolar\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-7\"\u003e powered!  \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-8\"\u003eNo messy power cords.\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-9\"\u003e \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-10\"\u003eNo plugs.\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-11\"\u003e  Hang it up in a tree!   Oooo.  And all that wonderful solar power data (solar panels, battery and computer power) are sent back to your Pi too!   More Data!  More Cowbell!  These units will transmit about 100m (~300ft) depending on what you have between the unit and your Rspberry Pi.  You can always add a bigger antenna however!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9nsoa-0-0\"\u003e\n\u003cdiv data-offset-key=\"9nsoa-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9nsoa-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d592o-0-0\"\u003e\n\u003cdiv data-offset-key=\"d592o-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"d592o-0-0\"\u003eSkyCam works with the \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\"\u003e\u003cspan data-offset-key=\"d592o-1-0\"\u003eSwitchDoc Labs SkyWeather2 system\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"d592o-2-0\"\u003e and and all the WeatherSense solar powered instruments (Air Quality, Lightning, Earthquake Detection, Temperature, Humidity, Wind, UV, and more).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"autk3-0-0\"\u003e\n\u003cdiv data-offset-key=\"autk3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"autk3-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"7umrf-0-0\"\u003e\n\u003cdiv data-offset-key=\"7umrf-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"7umrf-0-0\"\u003eAt SwitchDoc Labs, we believe in providing projects that generate great data and great learning experiences.   With the WeatherSense products, you build the units, learn how they work and then you can modify them with all the software being \u003c\/span\u003e\u003cspan data-offset-key=\"7umrf-0-1\"\u003eOpen Source!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"fld6i-0-0\"\u003e\n\u003cdiv data-offset-key=\"fld6i-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003ca href=\"https:\/\/amzn.to\/3kSJbbc\"\u003e\u003cspan data-offset-key=\"fld6i-0-0\"\u003eSwitchDoc Labs knows Python!  Our CTO, Dr. John Shovic, literally wrote the book on it, Python All-in-One for Dummies!\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9lt8m-0-0\"\u003e\n\u003cdiv data-offset-key=\"9lt8m-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9lt8m-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"4j6ud-0-0\"\u003e\n\u003cdiv data-offset-key=\"4j6ud-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4j6ud-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"ftlcv-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"\" role=\"presentation\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/492\/05e4153fb1cfce4fc3d60883045fd260_original.jpg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991526\u0026amp;frame=1\u0026amp;s=b61a4c8db199aa68521beb4fac5ea567\"\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"do11d-0-0\"\u003e\n\u003cdiv data-offset-key=\"do11d-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"do11d-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"3guu8-0-0\"\u003e\n\u003cdiv data-offset-key=\"3guu8-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"3guu8-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"170h1-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"170h1-0-0\"\u003eSolar Wireless SkyCam\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5hgmr-0-0\"\u003e\n\u003cdiv data-offset-key=\"5hgmr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5hgmr-0-0\"\u003eThe Solar Wireless SkyCam is a solar powered remote controlled low power ESP32 based camera that you build and can modify yourself.  We provide all the parts and the 3D Print STL models (and the Fusion 360 design files), so you can print the case yourself (optionally, you can buy one from us, but we encourage you to print it yourself!).\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"c5d01-0-0\"\u003e\n\u003cdiv data-offset-key=\"c5d01-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"c5d01-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"3k1g-0-0\"\u003e\n\u003cdiv data-offset-key=\"3k1g-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"3k1g-0-0\"\u003eOh, and did we mention you can have multiple SkyCams on one system to get a complete view of your local weather environment?\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"35a6d-0-0\"\u003e\n\u003cdiv data-offset-key=\"35a6d-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"35a6d-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"7b33l-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"SkyCam Block Diagram\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/279\/198\/5f7e873feec0de5de3b6a2c58339c235_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626886657\u0026amp;frame=1\u0026amp;s=3ff25462f78bbf6ea5df171fb9170fa0\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSkyCam Block Diagram\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"77pom-0-0\"\u003e\n\u003cdiv data-offset-key=\"77pom-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"77pom-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"bgplp-0-0\"\u003e\n\u003cdiv data-offset-key=\"bgplp-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"bgplp-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"1grct-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"video-player\" data-video-url=\"https:\/\/v.kickstarter.com\/1629147977_b48d6c3aff8b4f4385af2075fb7abfb751316fc4\/assets\/034\/292\/635\/33652a4002b0f13c4a166df7fa1e518c_h264_high.mp4\" data-image=\"https:\/\/d15chbti7ht62o.cloudfront.net\/assets\/034\/292\/635\/33652a4002b0f13c4a166df7fa1e518c_h264_base.jpg?2021\" data-dimensions='{\"width\":680,\"height\":510}' data-context=\"Story Description\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/faoqt-wVbn4\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9dpcv-0-0\"\u003e\n\u003cdiv data-offset-key=\"9dpcv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9dpcv-0-0\"\u003eAll of this software is included and is open source for you to learn from and modify.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"smck-0-0\"\u003e\n\u003cdiv data-offset-key=\"smck-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"smck-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"ad2fa-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"ad2fa-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d4v1t-0-0\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 data-offset-key=\"f1hq6-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"f1hq6-0-0\"\u003e3D Print Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"dbru2-0-0\"\u003e\n\u003cdiv data-offset-key=\"dbru2-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"dbru2-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"ctpjr-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"3D Printed Parts (Some Parts are not shown)\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/782\/96e7f6ac32e0f4fa8804b6ffdb821501_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626993909\u0026amp;frame=1\u0026amp;s=050cbfe9a64b866d344f46186b11eeb9\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003e3D Printed Parts (Some Parts are not shown)\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9v0qp-0-0\"\u003e\n\u003cdiv data-offset-key=\"9v0qp-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"9v0qp-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"b690h-0-0\"\u003e\n\u003cdiv data-offset-key=\"b690h-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"b690h-0-0\"\u003eWe provide the STL 3D Print files (and the Fusion 360 design files so you can modify the designs!) so you can print your own case.   For those without access to a 3D Printer, we do have the 3D cases available.   \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"bgscn-0-0\"\u003e\n\u003cdiv data-offset-key=\"bgscn-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"bgscn-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2qpmm-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"2qpmm-0-0\"\u003eWhat else do you need to use these kits?\u003c\/span\u003e\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"av131-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"av131-0-0\"\u003e\n\u003cdiv data-offset-key=\"av131-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"av131-0-0\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"fp0d4-0-0\"\u003e\n\u003cdiv data-offset-key=\"fp0d4-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"fp0d4-0-0\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/double-side-polished-far-uv-fused-silica-quartz-glass-sheets-plate-30-30-1mm?_pos=2\u0026amp;_sid=9697eb6e6\u0026amp;_ss=r\"\u003e\u003cspan data-offset-key=\"fp0d4-1-0\"\u003eQuartz Glass Sheets Plate 30*30*1mm for Camera Aperture Plate\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"fp0d4-2-0\"\u003e (See Add-Ons)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"f80v0-0-0\"\u003e\n\u003cdiv data-offset-key=\"f80v0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"f80v0-0-0\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as  \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/353\"\u003e\u003cspan data-offset-key=\"f80v0-1-0\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"f80v0-2-0\"\u003e - if you get them off of Amazon, check the wiring most of them from Amazon are wired backwards - Fully discussed in manuals.  Here's a great website showing the problem: \u003c\/span\u003e\u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\"\u003e\u003cspan data-offset-key=\"f80v0-3-0\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"f80v0-4-0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-offset-key=\"8nu7n-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"8nu7n-0-0\"\u003eFull Open Source Software that you can Modify\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"1lbp0-0-0\"\u003e\n\u003cdiv data-offset-key=\"1lbp0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1lbp0-0-0\"\u003eWe provide the Python3 software for the Raspberry Pi and C\/C++ code for the Arduino IDE. All open source!  The Pure Python software (and the C\/C++ code for the ESP32) can be modified to add new sensors, support new cloud software and connect up to your own projects and software.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"4nc3i-0-0\"\u003e\n\u003cdiv data-offset-key=\"4nc3i-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4nc3i-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"56bao-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"56bao-0-0\"\u003eLocal Displays on your Raspberry Pi\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"di56m-0-0\"\u003e\n\u003cdiv data-offset-key=\"di56m-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"di56m-0-0\"\u003eIncluded with the kit is the WeatherSense Monitor software (Python3 for your Raspberry Pi) that displays all your SkyCam information (as well as any other WeatherSense instruments you may have) in one handy place.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"efcn7-0-0\"\u003e\n\u003cdiv data-offset-key=\"efcn7-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"efcn7-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5lnqo-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"The SkyCam page on the Raspberry Pi\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/560\/0740d142814e3e0b64caee458b9e0a99_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626992048\u0026amp;frame=1\u0026amp;s=e4bce95e5b739dcf713bab7c4f9faae6\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe SkyCam page on the Raspberry Pi\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"2hldt-0-0\"\u003e\n\u003cdiv data-offset-key=\"2hldt-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"2hldt-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"cb78r-0-0\"\u003e\n\u003cdiv data-offset-key=\"cb78r-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"cb78r-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"feqat-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"feqat-0-0\"\u003eLocal Picture Storage and Time Lapses!\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"e75m3-0-0\"\u003e\n\u003cdiv data-offset-key=\"e75m3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"e75m3-0-0\"\u003eOne of the most interesting things that the Raspberry Pi does with your pictures is it stores them in an organized fashion on your computer (and cleans them out after 14 days - this is changable by you!) and keeps the information in a MySQL database for analysis (all the Solar Power information is also stored there!).   Once a day at 5am, it will build a time lapse video of all the pictures from the previous day and save the Time Lapse video where you can watch it, copy it, download it or post it on your Instagram!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5vkab-0-0\"\u003e\n\u003cdiv data-offset-key=\"5vkab-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5vkab-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"17ug8-0-0\"\u003e\n\u003cdiv data-offset-key=\"17ug8-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"17ug8-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"14mfg-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"Morning Smoky Skies over Washington State and SDL\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/598\/621c0c9410121aa46b6bb8ac59b7cbd0_original.jpg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626992445\u0026amp;frame=1\u0026amp;s=fa4e7bda45a68db66629234793bebfc7\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eMorning Smoky Skies over Washington State and SDL\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"3h3ob-0-0\"\u003e\n\u003cdiv data-offset-key=\"3h3ob-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"3h3ob-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"du1je-0-0\"\u003e\n\u003cdiv data-offset-key=\"du1je-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"du1je-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"565fg-0-0\"\u003e\n\u003cdiv data-offset-key=\"565fg-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"565fg-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d16a2-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"Zoom in on Time Lapses\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/614\/d9b90e343c50167988a0b3e5917b4df6_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626992560\u0026amp;frame=1\u0026amp;s=5de20e4401839077a9a49922732b9b49\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eZoom in on Time Lapses\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"2df1v-0-0\"\u003e\n\u003cdiv data-offset-key=\"2df1v-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"2df1v-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"dq867-0-0\"\u003e\n\u003cdiv data-offset-key=\"dq867-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"dq867-0-0\"\u003eBut wait!  There is more.   The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi.   You can download the software from github.com\/switchdoclabs or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dq867-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"dq867-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5qppp-0-0\"\u003e\n\u003cdiv data-offset-key=\"5qppp-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5qppp-0-0\"\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"f0ucf-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"f0ucf-0-0\"\u003e\n\u003cdiv data-offset-key=\"f0ucf-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"f0ucf-0-0\"\u003eAll messages published on MQTT  (topic: weathersense\/#)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"arrvk-0-0\"\u003e\n\u003cdiv data-offset-key=\"arrvk-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"arrvk-0-0\"\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"ejnjg-0-0\"\u003e\n\u003cdiv data-offset-key=\"ejnjg-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"ejnjg-0-0\"\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"7vdks-0-0\"\u003e\n\u003cdiv data-offset-key=\"7vdks-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"7vdks-0-0\"\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"foan7-0-0\"\u003e\n\u003cdiv data-offset-key=\"foan7-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"foan7-0-0\"\u003eThe WeatherSense software supports:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"42f63-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"42f63-0-0\"\u003e\n\u003cdiv data-offset-key=\"42f63-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"42f63-0-0\"\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"c6srm-0-0\"\u003e\n\u003cdiv data-offset-key=\"c6srm-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"c6srm-0-0\"\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d0bme-0-0\"\u003e\n\u003cdiv data-offset-key=\"d0bme-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"d0bme-0-0\"\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9rdih-0-0\"\u003e\n\u003cdiv data-offset-key=\"9rdih-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9rdih-0-0\"\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"2bgem-0-0\"\u003e\n\u003cdiv data-offset-key=\"2bgem-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"2bgem-0-0\"\u003eWeatherSense SkyCam\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"6ejkm-0-0\"\u003e\n\u003cdiv data-offset-key=\"6ejkm-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"6ejkm-0-0\"\u003eWeatherSense AfterShock Earthquake Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"24a6e-0-0\"\u003e\n\u003cdiv data-offset-key=\"24a6e-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"24a6e-0-0\"\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan data-offset-key=\"24a6e-0-0\"\u003eSending Commands to the SkyCam\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-offset-key=\"24a6e-0-0\"\u003eSee the testSkyCamRemote.py software in either SkyWeather2 or WeatherSense software.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eWhat You Can Change on the SkyCam Remotely\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe have built in a protocol using MQTT that allows you to change a variety of parameters on the SkyCam without reprogramming the SkyCam (you have all the open source software to do that if you wish, however!).   We also provide the example Python3 software to accomplish these tasks. These  settable parameters are:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMQTTCYCLECHANGE - Change the delay between pictures in seconds - defaults to 50 seconds\u003c\/li\u003e\n\u003cli\u003eMQTTSTARTDELAY - Change delay in seconds from initialization of camera to the picture.  This helps with setting the exposure of the camera - long delay, better high light exposure\u003c\/li\u003e\n\u003cli\u003eMQTTTURNOFFBLINK - Turns off the default bright light blink before the camera is invoked.  Saves power too!\u003c\/li\u003e\n\u003cli\u003eMQTTBLINKXTIMES - Blink the bright light X number of times.  Great for identifying the SkyCam units.\u003c\/li\u003e\n\u003cli\u003eMQTTSETTODEFAULTS - Resets SkyCam to factory default\u003c\/li\u003e\n\u003cli\u003eMQTTREBOOT - Forces the SkyCam unit to reboot\u003c\/li\u003e\n\u003cli\u003eMQTTERASEMEMORY - Clears all non-volatile memory and reboots.\u003c\/li\u003e\n\u003cli\u003eMQTTRESOLUTION - Changes the resolution of the picture.  Defaults to SVGA (800x600).  Can set any of these values:  QVGA|CIF|VGA|SVGA|XGA|SXGA|UXGA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e- FRAMESIZE_QVGA for 320x240 - value 5\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_CIF for 400x296 - value 6\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_VGA for 640x480 - value 8\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_SVGA for 800x600 - value 9 (Default)\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_XGA for 1024x768 - value 10\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_SXGA for 1280x1024 - value 12\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_UXGA for 1600x1200 - value 13\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMQTTUPDATEPARAM - Sets all the initialization parameters for the camera.  The default list is:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eDEFAULTSENSORSTRING \"0;0;0;0;1;1;0;1;0;0;300;1;0;0;0;1;1;1;0;0;1;0;\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach location corresponds to the table below:\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"\" data-id=\"34308066\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit ls-is-cached lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/308\/066\/2073694054ae8b1a3b288878e384528c_original.png?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1627157166\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=6c40c92d93f7e172556268c45cee2869\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/308\/066\/2073694054ae8b1a3b288878e384528c_original.png?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1627157166\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=6c40c92d93f7e172556268c45cee2869\"\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-08-15T09:55:26-07:00","created_at":"2021-08-15T09:39:52-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Break Out Boards,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":8000,"price_min":8000,"price_max":8000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40960359202983,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0759-WSSKYCAM-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Solar SkyCam - WeatherSense","public_title":null,"options":["Default Title"],"price":8000,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ffd89bb610abf57c0ce2c2c1440802e9_original.JPG-2.jpg?v=1629046323","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d9b90e343c50167988a0b3e5917b4df6_original.jpg?v=1629046323","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5f7e873feec0de5de3b6a2c58339c235_original.jpg?v=1629046323","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/012db72c43821a1e9af9bbf5cd3e806c_original.jpg?v=1629046323","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2b9a4b096437afb6782e1ccae82a9d33_original.jpg?v=1629046323"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ffd89bb610abf57c0ce2c2c1440802e9_original.JPG-2.jpg?v=1629046323","options":["Title"],"media":[{"alt":null,"id":22990823751847,"position":1,"preview_image":{"aspect_ratio":1.333,"height":510,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ffd89bb610abf57c0ce2c2c1440802e9_original.JPG-2.jpg?v=1629046323"},"aspect_ratio":1.333,"height":510,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ffd89bb610abf57c0ce2c2c1440802e9_original.JPG-2.jpg?v=1629046323","width":680},{"alt":null,"id":22990823719079,"position":2,"preview_image":{"aspect_ratio":1.385,"height":486,"width":673,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d9b90e343c50167988a0b3e5917b4df6_original.jpg?v=1629046323"},"aspect_ratio":1.385,"height":486,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d9b90e343c50167988a0b3e5917b4df6_original.jpg?v=1629046323","width":673},{"alt":null,"id":22990823620775,"position":3,"preview_image":{"aspect_ratio":1.414,"height":481,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5f7e873feec0de5de3b6a2c58339c235_original.jpg?v=1629046323"},"aspect_ratio":1.414,"height":481,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/5f7e873feec0de5de3b6a2c58339c235_original.jpg?v=1629046323","width":680},{"alt":null,"id":22990823653543,"position":4,"preview_image":{"aspect_ratio":1.252,"height":543,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/012db72c43821a1e9af9bbf5cd3e806c_original.jpg?v=1629046323"},"aspect_ratio":1.252,"height":543,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/012db72c43821a1e9af9bbf5cd3e806c_original.jpg?v=1629046323","width":680},{"alt":null,"id":22990839382183,"position":5,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/fa04036591574b32b6fb94c97eff7a17.thumbnail.0000000.jpg?v=1629046339"},"aspect_ratio":1.333,"duration":43910,"media_type":"video","sources":[{"format":"mp4","height":480,"mime_type":"video\/mp4","url":"https:\/\/cdn.shopify.com\/videos\/c\/vp\/fa04036591574b32b6fb94c97eff7a17\/fa04036591574b32b6fb94c97eff7a17.SD-480p-1.5Mbps.mp4","width":640},{"format":"m3u8","height":480,"mime_type":"application\/x-mpegURL","url":"https:\/\/cdn.shopify.com\/videos\/c\/vp\/fa04036591574b32b6fb94c97eff7a17\/fa04036591574b32b6fb94c97eff7a17.m3u8","width":640}]},{"alt":null,"id":22990823588007,"position":6,"preview_image":{"aspect_ratio":1.033,"height":658,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2b9a4b096437afb6782e1ccae82a9d33_original.jpg?v=1629046323"},"aspect_ratio":1.033,"height":658,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2b9a4b096437afb6782e1ccae82a9d33_original.jpg?v=1629046323","width":680}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"4r2vv-0-0\"\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4r2vv-0-0\"\u003eSolar SkyCam is a great addition to your SkyWeather2 weather system or to your WeatherSense sensors.   It provides a solar powered camera and transmits the picture to the Raspberry Pi.   The Raspberry Pi builds a daily TimeLapse video and stores the pictures on the Raspberry Pi.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4r2vv-0-0\"\u003eHaving a SkyCam in your SkyWeather2 system means you can keep the Raspberry Pi inside your house and don't have to mount it outside.   Both the internal Pi camera on SkyWeather2 and multiple SkyCams are supported at the same time.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003cimg height=\"312\" width=\"441\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/279\/198\/5f7e873feec0de5de3b6a2c58339c235_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626886657\u0026amp;frame=1\u0026amp;s=3ff25462f78bbf6ea5df171fb9170fa0\" alt=\"SkyCam Block Diagram\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/279\/198\/5f7e873feec0de5de3b6a2c58339c235_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626886657\u0026amp;frame=1\u0026amp;s=3ff25462f78bbf6ea5df171fb9170fa0\" data-mce-selected=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-0\"\u003eSkyCam\u003c\/span\u003e\u003cspan data-offset-key=\"4r2vv-0-1\"\u003e can be used stand alone supplying data to your Raspberry Pi or you can connect with the SkyWeather2 weather station to get even more local environmental information.  You can even have multiple Solar SkyCams running on the same network!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4r2vv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4r2vv-0-1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1bikr-0-0\"\u003eAnd as always, easy to put together with NO SOLDERING! \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1bikr-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1bikr-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2 data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1bikr-0-0\"\u003eDownloads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/08\/SkyCamAssemblyAndTestManual1.1.pdf\" target=\"_blank\"\u003e SkyCam Assembly and Operations Manual\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\"\u003eRaspberry Pi WeatherSense Software\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_ESP32_WeatherSenseSkyCam\"\u003eArduino IDE ESP32 Code for SkyCam\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_SolarSkyCam\"\u003e3D Prints Files for SkyCam\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/3d-print-for-weathersense-skycam\"\u003eIf you want to buy a 3D Print, you can find it here.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1bikr-0-0\"\u003eArticles about SkyCam\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2022\/04\/tutorial-changing-mqtt-server-ip-skycam\/\" target=\"_blank\"\u003eTutorial:  Changing MQTT Server IP on Solar SkyCam\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/08\/tutorial-adding-more-solar-panels-to-skycam-and-weathersense-sensors\/\" target=\"_blank\"\u003eAdding more Solar Panels to SkyCam and other WeatherSense Sensors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/08\/time-lapse-videos-on-skyweather2\/\" target=\"_blank\"\u003eTIme Lapse video with SkyCam\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1bikr-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1bikr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cdiv data-offset-key=\"2odq0-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2odq0-0-0\"\u003e\u003cspan data-offset-key=\"2odq0-0-0\"\u003eThis is the way the SkyCam system works.   The ESP32 wakes up every minute (programmable) and takes a picture.  It then transmits the picture to the Rapsberry Pi using an MQTT reliable data connection in pieces (chunks!) that are reassembled and checked as the full picture on the Raspberry Pi.   The ESP32 then throttles down the CPU and goes to sleep until the next picture to save power.  Meanwhile, the SunAirPlus3  board is monitoring the solar panel and battery to keep things up and charged safely for your LiPo battery.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2odq0-0-0\"\u003e\n\u003cspan data-offset-key=\"2odq0-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"8c981-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8c981-0-0\"\u003e\u003cspan data-offset-key=\"8c981-0-0\"\u003eThe Raspberry Pi then takes the picture and puts it in a MySQL database for later use and then records all the glorious data from the Solar Power system on SkyCam for later analysis and graphing.  More Data! More Data! More Data!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dnhs5-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dnhs5-0-0\"\u003e\u003cspan data-offset-key=\"dnhs5-0-0\"\u003eThe Raspberry Pi then updates the included Dash App (local display) and every morning at 5am builds a new Time Lapse for your enjoyment (Excuse the lawn sprinklers going off in a few places!)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5s9jn-0-0\"\u003e\n\u003cdiv data-offset-key=\"5s9jn-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"5s9jn-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"bells-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"SkyCam Scanning the Sky\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/235\/ffd89bb610abf57c0ce2c2c1440802e9_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626989665\u0026amp;frame=1\u0026amp;s=8c600512ca003956ef780b3e6faab87b\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSkyCam Scanning the Sky\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9oa1v-0-0\"\u003e\n\u003cdiv data-offset-key=\"9oa1v-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"9oa1v-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"b374c-0-0\"\u003e\n\u003cdiv data-offset-key=\"b374c-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"b374c-0-0\"\u003eThese are kits that are easy to build and require NO SOLDERING!\u003c\/span\u003e\u003cspan data-offset-key=\"b374c-0-1\"\u003e   You can do this easily with your kids.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"703gu-0-0\"\u003e\n\u003cdiv data-offset-key=\"703gu-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"703gu-0-0\"\u003eSkyCam is a\u003c\/span\u003e\u003cspan data-offset-key=\"703gu-0-1\"\u003e great\u003c\/span\u003e\u003cspan data-offset-key=\"703gu-0-2\"\u003e way to learn about modern small computers and about the fantastic Raspberry Pi by yourself or with your kids!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"703gu-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"cf8h3-0-0\"\u003e\n\u003cdiv data-offset-key=\"cf8h3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"cf8h3-0-0\"\u003eBy the way, do you have interesting things around your home or school?  You can add multiple SkyCams to your system to see \u003c\/span\u003e\u003cspan data-offset-key=\"cf8h3-0-1\"\u003eEVERTHING!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"cf8h3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"cf8h3-0-1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"cf8h3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003ch3 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ad2fa-0-0\"\u003e\u003cspan data-offset-key=\"ad2fa-0-0\"\u003eWhat is Included in the Kit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv data-offset-key=\"3fdgk-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3fdgk-0-0\"\u003e\n\u003cspan data-offset-key=\"3fdgk-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"28sgs-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/420\/012db72c43821a1e9af9bbf5cd3e806c_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991014\u0026amp;frame=1\u0026amp;s=b56989050b2656926ab1af7ac1cc3450\" role=\"presentation\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"escqp-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"escqp-0-0\"\u003e\n\u003cspan data-offset-key=\"escqp-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3via7-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3via7-0-0\"\u003e\u003cspan data-offset-key=\"3via7-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"fj5in-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fj5in-0-0\"\u003e\u003cspan data-offset-key=\"fj5in-0-0\"\u003eThis is the complete kit for the Solar SkyCam. Add on extras include small hardware assembly parts, a precut crystal window, a 3D Print and pre-loaded SD Card. Raspberry Pi is not included.   A 3.7V LiPo Battery is not included.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2attm-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2attm-0-0\"\u003e\u003cspan data-offset-key=\"2attm-0-0\"\u003eThe SkyCam Kit contains:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul data-offset-key=\"3cq8c-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"3cq8c-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3cq8c-0-0\"\u003e\u003cspan data-offset-key=\"3cq8c-0-0\"\u003eSunAirPlus2 or SunAirPlus3 Solar Controller and Data Collector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"b96ra-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"b96ra-0-0\"\u003e\u003cspan data-offset-key=\"b96ra-0-0\"\u003e330mA 6V Solar Power panel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"dqv6c-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dqv6c-0-0\"\u003e\u003cspan data-offset-key=\"dqv6c-0-0\"\u003eESP32 base OV2640 camera\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"97e1b-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"97e1b-0-0\"\u003e\u003cspan data-offset-key=\"97e1b-0-0\"\u003eUSB to Serial Interface Board\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"80que-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"80que-0-0\"\u003e\u003cspan data-offset-key=\"80que-0-0\"\u003eGrove ESP32 Cam Interface\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"ei3jo-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ei3jo-0-0\"\u003e\u003cspan data-offset-key=\"ei3jo-0-0\"\u003eHDC1080 Internal Temperature and Humidity Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"fne6h-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fne6h-0-0\"\u003e\u003cspan data-offset-key=\"fne6h-0-0\"\u003e2 -20cm Grove Cables\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"5v1ra-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5v1ra-0-0\"\u003e\u003cspan data-offset-key=\"5v1ra-0-0\"\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"fitm9-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fitm9-0-0\"\u003e\u003cspan data-offset-key=\"fitm9-0-0\"\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"6c334-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6c334-0-0\"\u003e\u003cspan data-offset-key=\"6c334-0-0\"\u003eLinks to all Source Code\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"aqs4i-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aqs4i-0-0\"\u003e\u003cspan data-offset-key=\"aqs4i-0-0\"\u003eLinks to 3D Prints STL and Design Files\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"8t2st-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8t2st-0-0\"\u003e\n\u003cspan data-offset-key=\"8t2st-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"fu493-0-0\" data-editor=\"3r2cf\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/486\/2b9a4b096437afb6782e1ccae82a9d33_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991464\u0026amp;frame=1\u0026amp;s=0ce4bd67985af6e91f626bf06685c07a\" alt=\"The Full Stack of the Camera Assembly\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe Full Stack of the Camera Assembly\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"95dpo-0-0\"\u003e\n\u003cdiv data-offset-key=\"95dpo-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"95dpo-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"f4asj-0-0\"\u003e\n\u003cdiv data-offset-key=\"f4asj-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"f4asj-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"6caqn-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"Inside SkyCam!\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/540\/48944a85ada7f9e7ab5e2369d6b6646d_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991910\u0026amp;frame=1\u0026amp;s=5a40385836af981ef297d92964b33739\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eInside SkyCam!\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"1rhhd-0-0\"\u003e\n\u003cdiv data-offset-key=\"1rhhd-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"1rhhd-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"cjaj3-0-0\"\u003e\n\u003cdiv data-offset-key=\"cjaj3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"cjaj3-0-0\"\u003eComes with great open source software for the Rapsberry Pi,\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-1\"\u003e as well as all the open source Arduino ID C\/C++ for the ESP32 in the SkyCam\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-2\"\u003e!  \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-3\"\u003eAll of this  great data is saved by your Raspberry Pi receiving this data using the built in WiFi.  The Raspberry Pi stores all the pictures and information about how your solar power system is performing \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-4\"\u003e(this is GREAT data to look at with your students, educators!)\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-5\"\u003e  More coolness.   And these are \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-6\"\u003esolar\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-7\"\u003e powered!  \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-8\"\u003eNo messy power cords.\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-9\"\u003e \u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-10\"\u003eNo plugs.\u003c\/span\u003e\u003cspan data-offset-key=\"cjaj3-0-11\"\u003e  Hang it up in a tree!   Oooo.  And all that wonderful solar power data (solar panels, battery and computer power) are sent back to your Pi too!   More Data!  More Cowbell!  These units will transmit about 100m (~300ft) depending on what you have between the unit and your Rspberry Pi.  You can always add a bigger antenna however!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9nsoa-0-0\"\u003e\n\u003cdiv data-offset-key=\"9nsoa-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9nsoa-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d592o-0-0\"\u003e\n\u003cdiv data-offset-key=\"d592o-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"d592o-0-0\"\u003eSkyCam works with the \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\"\u003e\u003cspan data-offset-key=\"d592o-1-0\"\u003eSwitchDoc Labs SkyWeather2 system\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"d592o-2-0\"\u003e and and all the WeatherSense solar powered instruments (Air Quality, Lightning, Earthquake Detection, Temperature, Humidity, Wind, UV, and more).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"autk3-0-0\"\u003e\n\u003cdiv data-offset-key=\"autk3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"autk3-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"7umrf-0-0\"\u003e\n\u003cdiv data-offset-key=\"7umrf-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"7umrf-0-0\"\u003eAt SwitchDoc Labs, we believe in providing projects that generate great data and great learning experiences.   With the WeatherSense products, you build the units, learn how they work and then you can modify them with all the software being \u003c\/span\u003e\u003cspan data-offset-key=\"7umrf-0-1\"\u003eOpen Source!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"fld6i-0-0\"\u003e\n\u003cdiv data-offset-key=\"fld6i-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003ca href=\"https:\/\/amzn.to\/3kSJbbc\"\u003e\u003cspan data-offset-key=\"fld6i-0-0\"\u003eSwitchDoc Labs knows Python!  Our CTO, Dr. John Shovic, literally wrote the book on it, Python All-in-One for Dummies!\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9lt8m-0-0\"\u003e\n\u003cdiv data-offset-key=\"9lt8m-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9lt8m-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"4j6ud-0-0\"\u003e\n\u003cdiv data-offset-key=\"4j6ud-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"4j6ud-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"ftlcv-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"\" role=\"presentation\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/492\/05e4153fb1cfce4fc3d60883045fd260_original.jpg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626991526\u0026amp;frame=1\u0026amp;s=b61a4c8db199aa68521beb4fac5ea567\"\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"do11d-0-0\"\u003e\n\u003cdiv data-offset-key=\"do11d-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"do11d-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"3guu8-0-0\"\u003e\n\u003cdiv data-offset-key=\"3guu8-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"3guu8-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"170h1-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"170h1-0-0\"\u003eSolar Wireless SkyCam\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5hgmr-0-0\"\u003e\n\u003cdiv data-offset-key=\"5hgmr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5hgmr-0-0\"\u003eThe Solar Wireless SkyCam is a solar powered remote controlled low power ESP32 based camera that you build and can modify yourself.  We provide all the parts and the 3D Print STL models (and the Fusion 360 design files), so you can print the case yourself (optionally, you can buy one from us, but we encourage you to print it yourself!).\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"c5d01-0-0\"\u003e\n\u003cdiv data-offset-key=\"c5d01-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"c5d01-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"3k1g-0-0\"\u003e\n\u003cdiv data-offset-key=\"3k1g-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"3k1g-0-0\"\u003eOh, and did we mention you can have multiple SkyCams on one system to get a complete view of your local weather environment?\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"35a6d-0-0\"\u003e\n\u003cdiv data-offset-key=\"35a6d-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"35a6d-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"7b33l-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"SkyCam Block Diagram\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/279\/198\/5f7e873feec0de5de3b6a2c58339c235_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626886657\u0026amp;frame=1\u0026amp;s=3ff25462f78bbf6ea5df171fb9170fa0\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSkyCam Block Diagram\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"77pom-0-0\"\u003e\n\u003cdiv data-offset-key=\"77pom-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"77pom-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"bgplp-0-0\"\u003e\n\u003cdiv data-offset-key=\"bgplp-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"bgplp-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"1grct-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"video-player\" data-video-url=\"https:\/\/v.kickstarter.com\/1629147977_b48d6c3aff8b4f4385af2075fb7abfb751316fc4\/assets\/034\/292\/635\/33652a4002b0f13c4a166df7fa1e518c_h264_high.mp4\" data-image=\"https:\/\/d15chbti7ht62o.cloudfront.net\/assets\/034\/292\/635\/33652a4002b0f13c4a166df7fa1e518c_h264_base.jpg?2021\" data-dimensions='{\"width\":680,\"height\":510}' data-context=\"Story Description\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/faoqt-wVbn4\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9dpcv-0-0\"\u003e\n\u003cdiv data-offset-key=\"9dpcv-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9dpcv-0-0\"\u003eAll of this software is included and is open source for you to learn from and modify.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"smck-0-0\"\u003e\n\u003cdiv data-offset-key=\"smck-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"smck-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"ad2fa-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"ad2fa-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d4v1t-0-0\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 data-offset-key=\"f1hq6-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"f1hq6-0-0\"\u003e3D Print Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"dbru2-0-0\"\u003e\n\u003cdiv data-offset-key=\"dbru2-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"dbru2-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"ctpjr-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"3D Printed Parts (Some Parts are not shown)\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/782\/96e7f6ac32e0f4fa8804b6ffdb821501_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626993909\u0026amp;frame=1\u0026amp;s=050cbfe9a64b866d344f46186b11eeb9\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003e3D Printed Parts (Some Parts are not shown)\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9v0qp-0-0\"\u003e\n\u003cdiv data-offset-key=\"9v0qp-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"9v0qp-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"b690h-0-0\"\u003e\n\u003cdiv data-offset-key=\"b690h-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"b690h-0-0\"\u003eWe provide the STL 3D Print files (and the Fusion 360 design files so you can modify the designs!) so you can print your own case.   For those without access to a 3D Printer, we do have the 3D cases available.   \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"bgscn-0-0\"\u003e\n\u003cdiv data-offset-key=\"bgscn-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"bgscn-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2qpmm-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"2qpmm-0-0\"\u003eWhat else do you need to use these kits?\u003c\/span\u003e\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"av131-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"av131-0-0\"\u003e\n\u003cdiv data-offset-key=\"av131-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"av131-0-0\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"fp0d4-0-0\"\u003e\n\u003cdiv data-offset-key=\"fp0d4-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"fp0d4-0-0\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/double-side-polished-far-uv-fused-silica-quartz-glass-sheets-plate-30-30-1mm?_pos=2\u0026amp;_sid=9697eb6e6\u0026amp;_ss=r\"\u003e\u003cspan data-offset-key=\"fp0d4-1-0\"\u003eQuartz Glass Sheets Plate 30*30*1mm for Camera Aperture Plate\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"fp0d4-2-0\"\u003e (See Add-Ons)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"f80v0-0-0\"\u003e\n\u003cdiv data-offset-key=\"f80v0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"f80v0-0-0\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as  \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/353\"\u003e\u003cspan data-offset-key=\"f80v0-1-0\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"f80v0-2-0\"\u003e - if you get them off of Amazon, check the wiring most of them from Amazon are wired backwards - Fully discussed in manuals.  Here's a great website showing the problem: \u003c\/span\u003e\u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\"\u003e\u003cspan data-offset-key=\"f80v0-3-0\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"f80v0-4-0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-offset-key=\"8nu7n-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"8nu7n-0-0\"\u003eFull Open Source Software that you can Modify\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"1lbp0-0-0\"\u003e\n\u003cdiv data-offset-key=\"1lbp0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1lbp0-0-0\"\u003eWe provide the Python3 software for the Raspberry Pi and C\/C++ code for the Arduino IDE. All open source!  The Pure Python software (and the C\/C++ code for the ESP32) can be modified to add new sensors, support new cloud software and connect up to your own projects and software.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"4nc3i-0-0\"\u003e\n\u003cdiv data-offset-key=\"4nc3i-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"4nc3i-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"56bao-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"56bao-0-0\"\u003eLocal Displays on your Raspberry Pi\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"di56m-0-0\"\u003e\n\u003cdiv data-offset-key=\"di56m-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"di56m-0-0\"\u003eIncluded with the kit is the WeatherSense Monitor software (Python3 for your Raspberry Pi) that displays all your SkyCam information (as well as any other WeatherSense instruments you may have) in one handy place.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"efcn7-0-0\"\u003e\n\u003cdiv data-offset-key=\"efcn7-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"efcn7-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5lnqo-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"The SkyCam page on the Raspberry Pi\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/560\/0740d142814e3e0b64caee458b9e0a99_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626992048\u0026amp;frame=1\u0026amp;s=e4bce95e5b739dcf713bab7c4f9faae6\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe SkyCam page on the Raspberry Pi\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"2hldt-0-0\"\u003e\n\u003cdiv data-offset-key=\"2hldt-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"2hldt-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"cb78r-0-0\"\u003e\n\u003cdiv data-offset-key=\"cb78r-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"cb78r-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-offset-key=\"feqat-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"feqat-0-0\"\u003eLocal Picture Storage and Time Lapses!\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"e75m3-0-0\"\u003e\n\u003cdiv data-offset-key=\"e75m3-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"e75m3-0-0\"\u003eOne of the most interesting things that the Raspberry Pi does with your pictures is it stores them in an organized fashion on your computer (and cleans them out after 14 days - this is changable by you!) and keeps the information in a MySQL database for analysis (all the Solar Power information is also stored there!).   Once a day at 5am, it will build a time lapse video of all the pictures from the previous day and save the Time Lapse video where you can watch it, copy it, download it or post it on your Instagram!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5vkab-0-0\"\u003e\n\u003cdiv data-offset-key=\"5vkab-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5vkab-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"17ug8-0-0\"\u003e\n\u003cdiv data-offset-key=\"17ug8-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"17ug8-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"14mfg-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"Morning Smoky Skies over Washington State and SDL\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/598\/621c0c9410121aa46b6bb8ac59b7cbd0_original.jpg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626992445\u0026amp;frame=1\u0026amp;s=fa4e7bda45a68db66629234793bebfc7\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eMorning Smoky Skies over Washington State and SDL\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"3h3ob-0-0\"\u003e\n\u003cdiv data-offset-key=\"3h3ob-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"3h3ob-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"du1je-0-0\"\u003e\n\u003cdiv data-offset-key=\"du1je-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"du1je-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"565fg-0-0\"\u003e\n\u003cdiv data-offset-key=\"565fg-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"565fg-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure class=\"\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d16a2-0-0\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cimg alt=\"Zoom in on Time Lapses\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/292\/614\/d9b90e343c50167988a0b3e5917b4df6_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1626992560\u0026amp;frame=1\u0026amp;s=5de20e4401839077a9a49922732b9b49\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eZoom in on Time Lapses\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"2df1v-0-0\"\u003e\n\u003cdiv data-offset-key=\"2df1v-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"2df1v-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"dq867-0-0\"\u003e\n\u003cdiv data-offset-key=\"dq867-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"dq867-0-0\"\u003eBut wait!  There is more.   The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi.   You can download the software from github.com\/switchdoclabs or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dq867-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\n\u003cspan data-offset-key=\"dq867-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"5qppp-0-0\"\u003e\n\u003cdiv data-offset-key=\"5qppp-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5qppp-0-0\"\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"f0ucf-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"f0ucf-0-0\"\u003e\n\u003cdiv data-offset-key=\"f0ucf-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"f0ucf-0-0\"\u003eAll messages published on MQTT  (topic: weathersense\/#)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"arrvk-0-0\"\u003e\n\u003cdiv data-offset-key=\"arrvk-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"arrvk-0-0\"\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"ejnjg-0-0\"\u003e\n\u003cdiv data-offset-key=\"ejnjg-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"ejnjg-0-0\"\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"7vdks-0-0\"\u003e\n\u003cdiv data-offset-key=\"7vdks-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"7vdks-0-0\"\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"foan7-0-0\"\u003e\n\u003cdiv data-offset-key=\"foan7-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"foan7-0-0\"\u003eThe WeatherSense software supports:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"42f63-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"42f63-0-0\"\u003e\n\u003cdiv data-offset-key=\"42f63-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"42f63-0-0\"\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"c6srm-0-0\"\u003e\n\u003cdiv data-offset-key=\"c6srm-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"c6srm-0-0\"\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"d0bme-0-0\"\u003e\n\u003cdiv data-offset-key=\"d0bme-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"d0bme-0-0\"\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"9rdih-0-0\"\u003e\n\u003cdiv data-offset-key=\"9rdih-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"9rdih-0-0\"\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"2bgem-0-0\"\u003e\n\u003cdiv data-offset-key=\"2bgem-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"2bgem-0-0\"\u003eWeatherSense SkyCam\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"6ejkm-0-0\"\u003e\n\u003cdiv data-offset-key=\"6ejkm-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"6ejkm-0-0\"\u003eWeatherSense AfterShock Earthquake Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"3r2cf\" data-offset-key=\"24a6e-0-0\"\u003e\n\u003cdiv data-offset-key=\"24a6e-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"24a6e-0-0\"\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan data-offset-key=\"24a6e-0-0\"\u003eSending Commands to the SkyCam\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-offset-key=\"24a6e-0-0\"\u003eSee the testSkyCamRemote.py software in either SkyWeather2 or WeatherSense software.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eWhat You Can Change on the SkyCam Remotely\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe have built in a protocol using MQTT that allows you to change a variety of parameters on the SkyCam without reprogramming the SkyCam (you have all the open source software to do that if you wish, however!).   We also provide the example Python3 software to accomplish these tasks. These  settable parameters are:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMQTTCYCLECHANGE - Change the delay between pictures in seconds - defaults to 50 seconds\u003c\/li\u003e\n\u003cli\u003eMQTTSTARTDELAY - Change delay in seconds from initialization of camera to the picture.  This helps with setting the exposure of the camera - long delay, better high light exposure\u003c\/li\u003e\n\u003cli\u003eMQTTTURNOFFBLINK - Turns off the default bright light blink before the camera is invoked.  Saves power too!\u003c\/li\u003e\n\u003cli\u003eMQTTBLINKXTIMES - Blink the bright light X number of times.  Great for identifying the SkyCam units.\u003c\/li\u003e\n\u003cli\u003eMQTTSETTODEFAULTS - Resets SkyCam to factory default\u003c\/li\u003e\n\u003cli\u003eMQTTREBOOT - Forces the SkyCam unit to reboot\u003c\/li\u003e\n\u003cli\u003eMQTTERASEMEMORY - Clears all non-volatile memory and reboots.\u003c\/li\u003e\n\u003cli\u003eMQTTRESOLUTION - Changes the resolution of the picture.  Defaults to SVGA (800x600).  Can set any of these values:  QVGA|CIF|VGA|SVGA|XGA|SXGA|UXGA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e- FRAMESIZE_QVGA for 320x240 - value 5\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_CIF for 400x296 - value 6\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_VGA for 640x480 - value 8\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_SVGA for 800x600 - value 9 (Default)\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_XGA for 1024x768 - value 10\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_SXGA for 1280x1024 - value 12\u003c\/p\u003e\n\u003cp\u003e- FRAMESIZE_UXGA for 1600x1200 - value 13\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMQTTUPDATEPARAM - Sets all the initialization parameters for the camera.  The default list is:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eDEFAULTSENSORSTRING \"0;0;0;0;1;1;0;1;0;0;300;1;0;0;0;1;1;1;0;0;1;0;\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach location corresponds to the table below:\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"\" data-id=\"34308066\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit ls-is-cached lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/308\/066\/2073694054ae8b1a3b288878e384528c_original.png?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1627157166\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=6c40c92d93f7e172556268c45cee2869\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/034\/308\/066\/2073694054ae8b1a3b288878e384528c_original.png?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1627157166\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=6c40c92d93f7e172556268c45cee2869\"\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(40960359202983, { variant: {"id":40960359202983,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0759-WSSKYCAM-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Solar SkyCam - WeatherSense","public_title":null,"options":["Default Title"],"price":8000,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 6969774178471, product_handle: "solar-skycam-weathersense", price: 8000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("solar-powered-433mhz-wireless-air-quality-sensor-weathersense", 6575533424807, {"id":6575533424807,"title":"Air Quality - Solar Powered 433MHz Wireless Sensor - WeatherSense","handle":"solar-powered-433mhz-wireless-air-quality-sensor-weathersense","description":"\u003ch1 class=\"Polaris-Header-Title_2qj8j\" data-mce-fragment=\"1\"\u003eSolar Wireless Air Quality Sensor - WeatherSense\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/3e751741f996861a0271d09db191a27b_original.JPG_0e9dd891-a487-4d67-9d2b-74727694b392_480x480.jpg?v=1616081716\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cmeta charset=\"UTF-8\"\u003e\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eThese are kits that are easy to build and require \u003cstrong\u003eNO SOLDERING!\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e   You can do this easily with your kids. 100% \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eSkyWeather2\u003c\/a\u003e Compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCough.  Hack.  \u003c\/strong\u003e What is in your air?  Well, what every is in your air you are putting it into your lungs.   Remember the fires of 2020?    The smoke from the fires in California spread over the entire western half of the United States.   What is the local air quality at your house?  You can find out with the new WeatherSense AQI sensor.   What is AQI?  AQI stands for Air Quality Index and it is a general measurement of the density and size of particulates in the air you are breathing.  This sensor puts out an accurate measurement of the AQI at your house or school, so you can make the right decision of what to do on a given day.   We saw values of 450 last summer using these laser sensors during the fires in California.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/436868099558915fff3b766153e63908_original_png_480x480.jpg?v=1616082004\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/436868099558915fff3b766153e63908_original_png_480x480.jpg?v=1616082004\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat is WeatherSense?\u003c\/h2\u003e\n\u003cp\u003eWeatherSense is an open source wireless protocol for sending information from remote sensors to your Raspberry Pi.  This kit comes with the software you need to receive the WeatherSense messages using your Raspberry Pi and Software Defined Radio (SDR).\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/d753f4b01c165bd33f668e95958f26ad_original_png_480x480.jpg?v=1615842909\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/d753f4b01c165bd33f668e95958f26ad_original_png_480x480.jpg?v=1615842909\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSolar Wireless Kit Contents\u003c\/h2\u003e\n\u003cp\u003eThis is the complete kit for the Wireless Air Quality Sensor. Add ons to this kit include a SDR (Software Defined Radio) for your Raspberry Pi, a 3D Print and pre-loaded SD Card. Raspberry Pi is not included. A 3.7V LiPo Battery is not included.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eThe AQI Sensor Kit contains:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMini Pro Plus Low Power Computer\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e433MHz Transmitter Board with Inside Antenna\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHM3301 Laser Air Quality Sensor\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e330mA 6V Solar Power Cell\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSunAirPlus2 Solar Power Controller and Data Collector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e2 -20cm Grove Cables\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLinks to all Source Code\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/page1_480x480.png?v=1616083698\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat else do you need to use these kits?\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" target=\"_blank\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" data-mce-fragment=\"1\"\u003eCompatible Software Defined Radio\u003c\/a\u003e (We have one in stock but you can get one in many places on the network)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as \u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" target=\"_blank\" data-mce-href=\"https:\/\/www.adafruit.com\/product\/353\" data-mce-fragment=\"1\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/a\u003e - if you get them off of Amazon, check the wiring most of them are wired backwards - Fully discussed in manuals. Here's a great website showing the problem: \u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" target=\"_blank\" data-mce-href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" data-mce-fragment=\"1\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/02\/WeatherSenseAQAssemblyAndTestManual1.2.pdf\" target=\"_blank\"\u003eStep-by-Step Air Quality Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/03\/WeatherSenseAQWeatherProofingManual1.1.pdf\" target=\"_blank\"\u003eStep-by-Step Air Quality WeatherProofing and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseAQI\" target=\"_blank\"\u003eArduino Open Source C\/C++ Software for the the Air Quality Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\"\u003e3D Print STL Files for the Air Quality\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\"\u003eRaspberry Pi WeatherSense Open Source Software for data collection and visualization\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eWeatherSense Raspberry Pi Software\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h2\u003e\n\u003cp\u003eBut wait! There is more. The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi. You can download the software from github.com\/switchdoclabs or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.  See downloads below.\u003c\/p\u003e\n\u003cp\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eAll messages published on MQTT (topic: weathersense\/#)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WeatherSense software supports:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherCam (Coming soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd more WeatherSense sensors on the way!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/17e77f4a496d285ae0cccea8fce137b1_original_png_480x480.jpg?v=1616083263\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/17e77f4a496d285ae0cccea8fce137b1_original_png_480x480.jpg?v=1616083263\"\u003e\u003c\/p\u003e\n\u003ch1 class=\"page-anchor\"\u003e\u003c\/h1\u003e\n\u003ch2\u003eWhat is a Software Defined Radio?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\"\u003e \u003c\/p\u003e\n\u003cp\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\" data-mce-fragment=\"1\"\u003e\u003cbr\u003eThe SDR we are using with WeatherSense is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz. SwitchDoc Labs has written drivers for the WeatherSense sensors and supplies the drivers to the community open source. These are all available in a pre-built SD Card image.\u003c\/p\u003e\n\u003ch2 id=\"h:detecting-air-qualit\" class=\"page-anchor\"\u003eHow It Works: Detecting Air Quality Levels with the AQI Sensor\u003c\/h2\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"The HM3301 Laser AQI Sensor\" data-id=\"32331585\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit ls-is-cached lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/585\/4a15d34f8de31e0c473d47ec12e5a677_original.jpg?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000046\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=675d77edd5ae52dcdc39de9d348c0b07\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/585\/4a15d34f8de31e0c473d47ec12e5a677_original.jpg?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000046\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=675d77edd5ae52dcdc39de9d348c0b07\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/585\/4a15d34f8de31e0c473d47ec12e5a677_original.jpg?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000046\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=675d77edd5ae52dcdc39de9d348c0b07\"\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Laser PM2.5 Sensor (HM3301) is a next generation of laser dust detection sensor, which is used for continuous and real-time detection of dust in the air.   It is an inexpensive, yet accurate, way of measuring air quality in terms of AQI,\u003c\/p\u003e\n\u003cp\u003eIt is very different from the older versions of dust detectors and Different from the pumping dust detection sensor, and uses a fan to drive air during sensing and the air flowing through the detection chamber is used as a test sample to perform real-time and continuous test on dust of different particle sizes in the air.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"Comparing AQI Detectors (330X is our sensor)\" data-id=\"32331636\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit ls-is-cached lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/636\/7ccfb65d8667157d85e6a443a7cd63ed_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000315\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ef28ca594425d56ae7a86e489a90d270\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/636\/7ccfb65d8667157d85e6a443a7cd63ed_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000315\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ef28ca594425d56ae7a86e489a90d270\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/636\/7ccfb65d8667157d85e6a443a7cd63ed_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000315\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ef28ca594425d56ae7a86e489a90d270\"\u003e\n\u003cfigcaption class=\"px2\"\u003eComparing AQI Detectors (330X is our sensor)\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe HM-3301 Dust Sensor is based on the advanced Mie scattering light theory. When light passes through particles with quantity same as or larger than wavelength of the light, it will produce light scattering. The scattered light is concentrated and focused on a highly sensitive photodiode, which is then amplified and analyzed by the internal circuitry.   Using a specific mathematical model and algorithm you can obtain the count concentration and mass concentration of the dust particles.   Very nice.\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"Laser AQI Block Diagram\" data-id=\"32331628\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/628\/923536dd2ee85b4b4e1d025789918e87_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000268\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ce07265477ba64f728e4b8e5f4f14db6\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/628\/923536dd2ee85b4b4e1d025789918e87_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000268\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ce07265477ba64f728e4b8e5f4f14db6\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/628\/923536dd2ee85b4b4e1d025789918e87_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000268\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ce07265477ba64f728e4b8e5f4f14db6\"\u003e\n\u003cfigcaption class=\"px2\"\u003e\u003cbr\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe HM3301 is composed  of a fan, an infrared laser source, a condensing mirror, a photosensitive tube, a signal amplifying circuit and a signal sorting circuit.\u003c\/p\u003e\n\u003cp\u003eThe HM-3301 Dust Sensor is based on the advanced Mie scattering light theory. When light passes through particles with quantity same as or larger than wavelength of the light, it will produce light scattering. The scattered light is concentrated and focused on a highly sensitive photodiode, which is then amplified and analyzed by the internal circuitry.   Using a specific mathematical model and algorithm you can obtain the count concentration and mass concentration of the dust particles.   Very nice.\u003c\/p\u003e\n\u003cp\u003eThe HM3301 is composed  a fan, an infrared laser source, a condensing mirror, a photosensitive tube, a signal amplifying circuit and a signal sorting circuit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-18T09:27:37-07:00","created_at":"2021-03-15T13:14:43-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Grove,Break Out Boards,Raspberry Pi,Arduino,ESP8266","tags":[],"price":10599,"price_min":10599,"price_max":10599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39416555241639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0757-WSAQUALITY-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Air Quality - Solar Powered 433MHz Wireless Sensor - WeatherSense","public_title":null,"options":["Default Title"],"price":10599,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3e751741f996861a0271d09db191a27b_original.JPG_3921174b-1a9f-4225-9c52-0122c306d126.jpg?v=1616084989","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/page1.png?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/436868099558915fff3b766153e63908_original_png.jpg?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_a08854cd-6095-4da8-b357-2ecd66465d8f.jpg?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7ccfb65d8667157d85e6a443a7cd63ed_original_png.jpg?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a15d34f8de31e0c473d47ec12e5a677_original_jpg.jpg?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png_afed0f0c-b1fa-4243-a40a-1e96b109f685.jpg?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png_f6a6a11f-4c91-422a-8b7b-93dd31efe67b.jpg?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/923536dd2ee85b4b4e1d025789918e87_original_png.jpg?v=1616085077","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ceb81634f5ea3a4b41a168430d9cae45_original_png.jpg?v=1616085065","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d753f4b01c165bd33f668e95958f26ad_original_png_f2cdb962-e2d7-4cad-b8b1-4857dbe16a63.jpg?v=1616085065"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3e751741f996861a0271d09db191a27b_original.JPG_3921174b-1a9f-4225-9c52-0122c306d126.jpg?v=1616084989","options":["Title"],"media":[{"alt":null,"id":20542167056551,"position":1,"preview_image":{"aspect_ratio":1.223,"height":556,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3e751741f996861a0271d09db191a27b_original.JPG_3921174b-1a9f-4225-9c52-0122c306d126.jpg?v=1616084989"},"aspect_ratio":1.223,"height":556,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3e751741f996861a0271d09db191a27b_original.JPG_3921174b-1a9f-4225-9c52-0122c306d126.jpg?v=1616084989","width":680},{"alt":null,"id":20542179246247,"position":2,"preview_image":{"aspect_ratio":1.414,"height":905,"width":1280,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/page1.png?v=1616085077"},"aspect_ratio":1.414,"height":905,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/page1.png?v=1616085077","width":1280},{"alt":null,"id":20542174822567,"position":3,"preview_image":{"aspect_ratio":1.253,"height":399,"width":500,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/436868099558915fff3b766153e63908_original_png.jpg?v=1616085077"},"aspect_ratio":1.253,"height":399,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/436868099558915fff3b766153e63908_original_png.jpg?v=1616085077","width":500},{"alt":null,"id":20542168629415,"position":4,"preview_image":{"aspect_ratio":1.563,"height":435,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_a08854cd-6095-4da8-b357-2ecd66465d8f.jpg?v=1616085077"},"aspect_ratio":1.563,"height":435,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_a08854cd-6095-4da8-b357-2ecd66465d8f.jpg?v=1616085077","width":680},{"alt":null,"id":20542169677991,"position":5,"preview_image":{"aspect_ratio":2.024,"height":336,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7ccfb65d8667157d85e6a443a7cd63ed_original_png.jpg?v=1616085077"},"aspect_ratio":2.024,"height":336,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/7ccfb65d8667157d85e6a443a7cd63ed_original_png.jpg?v=1616085077","width":680},{"alt":null,"id":20542167908519,"position":6,"preview_image":{"aspect_ratio":1.333,"height":510,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a15d34f8de31e0c473d47ec12e5a677_original_jpg.jpg?v=1616085077"},"aspect_ratio":1.333,"height":510,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4a15d34f8de31e0c473d47ec12e5a677_original_jpg.jpg?v=1616085077","width":680},{"alt":null,"id":20542170529959,"position":7,"preview_image":{"aspect_ratio":0.86,"height":791,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png_afed0f0c-b1fa-4243-a40a-1e96b109f685.jpg?v=1616085077"},"aspect_ratio":0.86,"height":791,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png_afed0f0c-b1fa-4243-a40a-1e96b109f685.jpg?v=1616085077","width":680},{"alt":null,"id":20542172332199,"position":8,"preview_image":{"aspect_ratio":1.488,"height":457,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png_f6a6a11f-4c91-422a-8b7b-93dd31efe67b.jpg?v=1616085077"},"aspect_ratio":1.488,"height":457,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png_f6a6a11f-4c91-422a-8b7b-93dd31efe67b.jpg?v=1616085077","width":680},{"alt":null,"id":20542173642919,"position":9,"preview_image":{"aspect_ratio":1.726,"height":394,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/923536dd2ee85b4b4e1d025789918e87_original_png.jpg?v=1616085077"},"aspect_ratio":1.726,"height":394,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/923536dd2ee85b4b4e1d025789918e87_original_png.jpg?v=1616085077","width":680},{"alt":null,"id":20542175772839,"position":10,"preview_image":{"aspect_ratio":2.386,"height":285,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ceb81634f5ea3a4b41a168430d9cae45_original_png.jpg?v=1616085065"},"aspect_ratio":2.386,"height":285,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ceb81634f5ea3a4b41a168430d9cae45_original_png.jpg?v=1616085065","width":680},{"alt":null,"id":20542176362663,"position":11,"preview_image":{"aspect_ratio":2.5,"height":130,"width":325,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d753f4b01c165bd33f668e95958f26ad_original_png_f2cdb962-e2d7-4cad-b8b1-4857dbe16a63.jpg?v=1616085065"},"aspect_ratio":2.5,"height":130,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/d753f4b01c165bd33f668e95958f26ad_original_png_f2cdb962-e2d7-4cad-b8b1-4857dbe16a63.jpg?v=1616085065","width":325}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"Polaris-Header-Title_2qj8j\" data-mce-fragment=\"1\"\u003eSolar Wireless Air Quality Sensor - WeatherSense\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/3e751741f996861a0271d09db191a27b_original.JPG_0e9dd891-a487-4d67-9d2b-74727694b392_480x480.jpg?v=1616081716\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cmeta charset=\"UTF-8\"\u003e\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eThese are kits that are easy to build and require \u003cstrong\u003eNO SOLDERING!\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e   You can do this easily with your kids. 100% \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eSkyWeather2\u003c\/a\u003e Compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFor more information about WeatherSense - \u003ca href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/04\/tutorial-what-is-weathersense\/\"\u003eTutorial: What is WeatherSense? \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCough.  Hack.  \u003c\/strong\u003e What is in your air?  Well, what every is in your air you are putting it into your lungs.   Remember the fires of 2020?    The smoke from the fires in California spread over the entire western half of the United States.   What is the local air quality at your house?  You can find out with the new WeatherSense AQI sensor.   What is AQI?  AQI stands for Air Quality Index and it is a general measurement of the density and size of particulates in the air you are breathing.  This sensor puts out an accurate measurement of the AQI at your house or school, so you can make the right decision of what to do on a given day.   We saw values of 450 last summer using these laser sensors during the fires in California.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/436868099558915fff3b766153e63908_original_png_480x480.jpg?v=1616082004\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/436868099558915fff3b766153e63908_original_png_480x480.jpg?v=1616082004\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat is WeatherSense?\u003c\/h2\u003e\n\u003cp\u003eWeatherSense is an open source wireless protocol for sending information from remote sensors to your Raspberry Pi.  This kit comes with the software you need to receive the WeatherSense messages using your Raspberry Pi and Software Defined Radio (SDR).\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/d753f4b01c165bd33f668e95958f26ad_original_png_480x480.jpg?v=1615842909\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/d753f4b01c165bd33f668e95958f26ad_original_png_480x480.jpg?v=1615842909\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSolar Wireless Kit Contents\u003c\/h2\u003e\n\u003cp\u003eThis is the complete kit for the Wireless Air Quality Sensor. Add ons to this kit include a SDR (Software Defined Radio) for your Raspberry Pi, a 3D Print and pre-loaded SD Card. Raspberry Pi is not included. A 3.7V LiPo Battery is not included.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eThe AQI Sensor Kit contains:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMini Pro Plus Low Power Computer\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e433MHz Transmitter Board with Inside Antenna\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHM3301 Laser Air Quality Sensor\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e330mA 6V Solar Power Cell\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSunAirPlus2 Solar Power Controller and Data Collector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e2 -20cm Grove Cables\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLinks to all Source Code\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/page1_480x480.png?v=1616083698\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat else do you need to use these kits?\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" target=\"_blank\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/software-defined-radio-sdr-and-antenna\" data-mce-fragment=\"1\"\u003eCompatible Software Defined Radio\u003c\/a\u003e (We have one in stock but you can get one in many places on the network)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as \u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" target=\"_blank\" data-mce-href=\"https:\/\/www.adafruit.com\/product\/353\" data-mce-fragment=\"1\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/a\u003e - if you get them off of Amazon, check the wiring most of them are wired backwards - Fully discussed in manuals. Here's a great website showing the problem: \u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" target=\"_blank\" data-mce-href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" data-mce-fragment=\"1\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/02\/WeatherSenseAQAssemblyAndTestManual1.2.pdf\" target=\"_blank\"\u003eStep-by-Step Air Quality Assembly and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/03\/WeatherSenseAQWeatherProofingManual1.1.pdf\" target=\"_blank\"\u003eStep-by-Step Air Quality WeatherProofing and Test Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseAQI\" target=\"_blank\"\u003eArduino Open Source C\/C++ Software for the the Air Quality Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\"\u003e3D Print STL Files for the Air Quality\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\"\u003eRaspberry Pi WeatherSense Open Source Software for data collection and visualization\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eWeatherSense Raspberry Pi Software\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h2\u003e\n\u003cp\u003eBut wait! There is more. The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi. You can download the software from github.com\/switchdoclabs or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.  See downloads below.\u003c\/p\u003e\n\u003cp\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eAll messages published on MQTT (topic: weathersense\/#)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WeatherSense software supports:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense WeatherCam (Coming soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd more WeatherSense sensors on the way!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/17e77f4a496d285ae0cccea8fce137b1_original_png_480x480.jpg?v=1616083263\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/17e77f4a496d285ae0cccea8fce137b1_original_png_480x480.jpg?v=1616083263\"\u003e\u003c\/p\u003e\n\u003ch1 class=\"page-anchor\"\u003e\u003c\/h1\u003e\n\u003ch2\u003eWhat is a Software Defined Radio?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/650cc42f67fd1c06a800c3e154031a13_original.JPG_9c8da929-e7f3-4c10-bda2-6b3644cb7492_480x480.jpg?v=1615845053\"\u003e \u003c\/p\u003e\n\u003cp\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/7e2ac84c6bf24a647e3edebb337f1833_original_png_480x480.jpg?v=1615845437\" data-mce-fragment=\"1\"\u003e\u003cbr\u003eThe SDR we are using with WeatherSense is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz. SwitchDoc Labs has written drivers for the WeatherSense sensors and supplies the drivers to the community open source. These are all available in a pre-built SD Card image.\u003c\/p\u003e\n\u003ch2 id=\"h:detecting-air-qualit\" class=\"page-anchor\"\u003eHow It Works: Detecting Air Quality Levels with the AQI Sensor\u003c\/h2\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"The HM3301 Laser AQI Sensor\" data-id=\"32331585\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit ls-is-cached lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/585\/4a15d34f8de31e0c473d47ec12e5a677_original.jpg?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000046\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=675d77edd5ae52dcdc39de9d348c0b07\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/585\/4a15d34f8de31e0c473d47ec12e5a677_original.jpg?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000046\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=675d77edd5ae52dcdc39de9d348c0b07\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/585\/4a15d34f8de31e0c473d47ec12e5a677_original.jpg?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000046\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=675d77edd5ae52dcdc39de9d348c0b07\"\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Laser PM2.5 Sensor (HM3301) is a next generation of laser dust detection sensor, which is used for continuous and real-time detection of dust in the air.   It is an inexpensive, yet accurate, way of measuring air quality in terms of AQI,\u003c\/p\u003e\n\u003cp\u003eIt is very different from the older versions of dust detectors and Different from the pumping dust detection sensor, and uses a fan to drive air during sensing and the air flowing through the detection chamber is used as a test sample to perform real-time and continuous test on dust of different particle sizes in the air.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"Comparing AQI Detectors (330X is our sensor)\" data-id=\"32331636\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit ls-is-cached lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/636\/7ccfb65d8667157d85e6a443a7cd63ed_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000315\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ef28ca594425d56ae7a86e489a90d270\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/636\/7ccfb65d8667157d85e6a443a7cd63ed_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000315\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ef28ca594425d56ae7a86e489a90d270\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/636\/7ccfb65d8667157d85e6a443a7cd63ed_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000315\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ef28ca594425d56ae7a86e489a90d270\"\u003e\n\u003cfigcaption class=\"px2\"\u003eComparing AQI Detectors (330X is our sensor)\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe HM-3301 Dust Sensor is based on the advanced Mie scattering light theory. When light passes through particles with quantity same as or larger than wavelength of the light, it will produce light scattering. The scattered light is concentrated and focused on a highly sensitive photodiode, which is then amplified and analyzed by the internal circuitry.   Using a specific mathematical model and algorithm you can obtain the count concentration and mass concentration of the dust particles.   Very nice.\u003c\/p\u003e\n\u003cdiv class=\"template asset\" data-alt-text=\"\" data-caption=\"Laser AQI Block Diagram\" data-id=\"32331628\" contenteditable=\"false\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit lazyloaded\" data-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/628\/923536dd2ee85b4b4e1d025789918e87_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000268\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ce07265477ba64f728e4b8e5f4f14db6\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/628\/923536dd2ee85b4b4e1d025789918e87_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000268\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ce07265477ba64f728e4b8e5f4f14db6\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/331\/628\/923536dd2ee85b4b4e1d025789918e87_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613000268\u0026amp;auto=format\u0026amp;frame=1\u0026amp;lossless=true\u0026amp;s=ce07265477ba64f728e4b8e5f4f14db6\"\u003e\n\u003cfigcaption class=\"px2\"\u003e\u003cbr\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe HM3301 is composed  of a fan, an infrared laser source, a condensing mirror, a photosensitive tube, a signal amplifying circuit and a signal sorting circuit.\u003c\/p\u003e\n\u003cp\u003eThe HM-3301 Dust Sensor is based on the advanced Mie scattering light theory. When light passes through particles with quantity same as or larger than wavelength of the light, it will produce light scattering. The scattered light is concentrated and focused on a highly sensitive photodiode, which is then amplified and analyzed by the internal circuitry.   Using a specific mathematical model and algorithm you can obtain the count concentration and mass concentration of the dust particles.   Very nice.\u003c\/p\u003e\n\u003cp\u003eThe HM3301 is composed  a fan, an infrared laser source, a condensing mirror, a photosensitive tube, a signal amplifying circuit and a signal sorting circuit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(39416555241639, { variant: {"id":39416555241639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0757-WSAQUALITY-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Air Quality - Solar Powered 433MHz Wireless Sensor - WeatherSense","public_title":null,"options":["Default Title"],"price":10599,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 6575533424807, product_handle: "solar-powered-433mhz-wireless-air-quality-sensor-weathersense", price: 10599, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("3d-print-for-weathersense-air-quality-lightning", 6575538077863, {"id":6575538077863,"title":"3D Print for WeatherSense AfterShock, Air Quality, Lightning","handle":"3d-print-for-weathersense-air-quality-lightning","description":"\u003ch1 class=\"Polaris-Header-Title_2qj8j\"\u003e3D Print for WeatherSense AfterShock, Air Quality, Lightning\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full ABS 3D print of the box and solar assemblies for the WeatherSense Solar Wireless AfterShock, Air Quality and Lightning kits.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png_480x480.jpg?v=1615840832\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum Print Size:  195mmx115mmx50mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\n\u003ca name=\"_Toc58333248\"\u003e\u003c\/a\u003eNeeded Tools and Other Parts Not Supplied\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can find the small hardware assembly pack containing screws, spline and inserts to assemble the 3D Print.  You will need these tools:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDrill\u003c\/p\u003e\n\u003cp\u003eSmall Screwdrivers\u003c\/p\u003e\n\u003cp\u003eSmall files\u003c\/p\u003e\n\u003cp\u003eSuper Glue\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo assemble, you will need the following additional hardware:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/weathersense-aq-lightning-hardware-parts-kit\" target=\"_blank\"\u003eSmall Hardware Parts for WeatherSense AfterShock, Air Quality, Lightning\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_6184_480x480.jpg?v=1614557308\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch1\u003eWant to print your own?\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-03-15T13:43:05-07:00","created_at":"2021-03-15T13:20:13-07:00","vendor":"SwitchDoc Labs","type":"Shop All,3D Printed Products","tags":["3D Printer","arduino","raspberry pi"],"price":8300,"price_min":8300,"price_max":8300,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39416574574759,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0755-3DPRINTTBAQI-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for WeatherSense AfterShock, Air Quality, Lightning","public_title":null,"options":["Default Title"],"price":8300,"weight":227,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png.jpg?v=1615840862"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png.jpg?v=1615840862","options":["Title"],"media":[{"alt":null,"id":20498301419687,"position":1,"preview_image":{"aspect_ratio":1.488,"height":457,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png.jpg?v=1615840862"},"aspect_ratio":1.488,"height":457,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png.jpg?v=1615840862","width":680}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"Polaris-Header-Title_2qj8j\"\u003e3D Print for WeatherSense AfterShock, Air Quality, Lightning\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full ABS 3D print of the box and solar assemblies for the WeatherSense Solar Wireless AfterShock, Air Quality and Lightning kits.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png_480x480.jpg?v=1615840832\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum Print Size:  195mmx115mmx50mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\n\u003ca name=\"_Toc58333248\"\u003e\u003c\/a\u003eNeeded Tools and Other Parts Not Supplied\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can find the small hardware assembly pack containing screws, spline and inserts to assemble the 3D Print.  You will need these tools:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDrill\u003c\/p\u003e\n\u003cp\u003eSmall Screwdrivers\u003c\/p\u003e\n\u003cp\u003eSmall files\u003c\/p\u003e\n\u003cp\u003eSuper Glue\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo assemble, you will need the following additional hardware:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/weathersense-aq-lightning-hardware-parts-kit\" target=\"_blank\"\u003eSmall Hardware Parts for WeatherSense AfterShock, Air Quality, Lightning\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/IMG_6184_480x480.jpg?v=1614557308\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch1\u003eWant to print your own?\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(39416574574759, { variant: {"id":39416574574759,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0755-3DPRINTTBAQI-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for WeatherSense AfterShock, Air Quality, Lightning","public_title":null,"options":["Default Title"],"price":8300,"weight":227,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: -2, product_id: 6575538077863, product_handle: "3d-print-for-weathersense-air-quality-lightning", price: 8300, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("copy-of-raspberry-pi-iot-lightning-detector-kit", 437134295078, {"id":437134295078,"title":"3D Print for Raspberry Pi IOT Lightning Detector Kit","handle":"copy-of-raspberry-pi-iot-lightning-detector-kit","description":"\u003ch1\u003e3D Print for Raspberry IOT Lightning Detector Kit\u003c\/h1\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full 3D print of the Raspberry Pi IOT Lightning Detector Box.   Why such a high price?  It takes over 20 hours to print out on our main 3D printer.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/PiThunderBoardIOT_large.png?v=1513085844\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWant to print your own?\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-12-10T14:37:28-08:00","created_at":"2017-12-12T05:21:42-08:00","vendor":"SwitchDoc Labs","type":"Shop All,3D Printed Products","tags":["3D Printer","arduino","IOT","raspberry pi"],"price":12000,"price_min":12000,"price_max":12000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":5872687153190,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0314-RPI3DIOT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for Raspberry Pi IOT Lightning Detector Kit","public_title":null,"options":["Default Title"],"price":12000,"weight":227,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728532","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6868.JPG?v=1531839431","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4317_2_e89fed6f-e798-4b0a-8f64-c86516047b29.JPG?v=1531839431","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_8313_c39b7d34-a20d-4560-9f6b-1397eb9bd945.JPG?v=1531839431","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4116_2_83c6a84d-3023-47ee-a171-ae4df83992b8.JPG?v=1531839431","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3519.JPG?v=1531839431","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/PiThunderBoardIOT.png?v=1531839431"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6868.JPG?v=1531839431","options":["Title"],"media":[{"alt":null,"id":884000489516,"position":1,"preview_image":{"aspect_ratio":1.201,"height":2384,"width":2864,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6868.JPG?v=1531839431"},"aspect_ratio":1.201,"height":2384,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_6868.JPG?v=1531839431","width":2864},{"alt":null,"id":884000161836,"position":2,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4317_2_e89fed6f-e798-4b0a-8f64-c86516047b29.JPG?v=1531839431"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4317_2_e89fed6f-e798-4b0a-8f64-c86516047b29.JPG?v=1531839431","width":3024},{"alt":null,"id":884000194604,"position":3,"preview_image":{"aspect_ratio":1.826,"height":1991,"width":3635,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_8313_c39b7d34-a20d-4560-9f6b-1397eb9bd945.JPG?v=1531839431"},"aspect_ratio":1.826,"height":1991,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_8313_c39b7d34-a20d-4560-9f6b-1397eb9bd945.JPG?v=1531839431","width":3635},{"alt":null,"id":884000227372,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1080,"width":1080,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4116_2_83c6a84d-3023-47ee-a171-ae4df83992b8.JPG?v=1531839431"},"aspect_ratio":1.0,"height":1080,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_4116_2_83c6a84d-3023-47ee-a171-ae4df83992b8.JPG?v=1531839431","width":1080},{"alt":null,"id":884000423980,"position":5,"preview_image":{"aspect_ratio":1.094,"height":2664,"width":2915,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3519.JPG?v=1531839431"},"aspect_ratio":1.094,"height":2664,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_3519.JPG?v=1531839431","width":2915},{"alt":null,"id":884003078188,"position":6,"preview_image":{"aspect_ratio":1.28,"height":1013,"width":1297,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/PiThunderBoardIOT.png?v=1531839431"},"aspect_ratio":1.28,"height":1013,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/PiThunderBoardIOT.png?v=1531839431","width":1297}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e3D Print for Raspberry IOT Lightning Detector Kit\u003c\/h1\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full 3D print of the Raspberry Pi IOT Lightning Detector Box.   Why such a high price?  It takes over 20 hours to print out on our main 3D printer.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/products\/PiThunderBoardIOT_large.png?v=1513085844\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWant to print your own?\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(5872687153190, { variant: {"id":5872687153190,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0314-RPI3DIOT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for Raspberry Pi IOT Lightning Detector Kit","public_title":null,"options":["Default Title"],"price":12000,"weight":227,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728532","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 437134295078, product_handle: "copy-of-raspberry-pi-iot-lightning-detector-kit", price: 12000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("3d-print-for-weathersense-skycam", 6969783124135, {"id":6969783124135,"title":"3D Print for WeatherSense SkyCam","handle":"3d-print-for-weathersense-skycam","description":"\u003ch1 class=\"Polaris-Header-Title_2qj8j\"\u003e3D Print for SkyCam\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full ABS 3D print of the box and solar assemblies for the WeatherSense Solar SkyCam\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png_480x480.jpg?v=1615840832\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum Print Size:  195mmx115mmx50mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\n\u003ca name=\"_Toc58333248\"\u003e\u003c\/a\u003eNeeded Tools and Other Parts Not Supplied\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can find the small hardware assembly pack containing screws, spline and inserts to assemble the 3D Print.  You will need these tools:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDrill\u003c\/p\u003e\n\u003cp\u003eSmall Screwdrivers\u003c\/p\u003e\n\u003cp\u003eSmall files\u003c\/p\u003e\n\u003cp\u003eSuper Glue\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo assemble, you will need the following additional hardware:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-skycam-weathersense\" target=\"_blank\"\u003eSmall Hardware Parts for SkyCam or SkyWeather2 \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5829_540x_8099a553-8be9-49d8-87a2-d21fdf79450f_480x480.jpg?v=1629047606\"\u003e\u003c\/p\u003e\n\u003ch1\u003eWant to print your own?\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_SolarSkyCam\" target=\"_blank\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-08-15T10:19:01-07:00","created_at":"2021-08-15T10:08:23-07:00","vendor":"SwitchDoc Labs","type":"Shop All,3D Printed Products","tags":["3D Printer","arduino","raspberry pi"],"price":9500,"price_min":9500,"price_max":9500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40960520814759,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0760-3DPRINTSKYCAM-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for WeatherSense SkyCam","public_title":null,"options":["Default Title"],"price":9500,"weight":227,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ParsList2Anno.jpg?v=1629561117"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ParsList2Anno.jpg?v=1629561117","options":["Title"],"media":[{"alt":null,"id":23084599869607,"position":1,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ParsList2Anno.jpg?v=1629561117"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ParsList2Anno.jpg?v=1629561117","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"Polaris-Header-Title_2qj8j\"\u003e3D Print for SkyCam\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full ABS 3D print of the box and solar assemblies for the WeatherSense Solar SkyCam\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/2348b9c6d36f7515d8ec7b9715cdc9ec_original_png_480x480.jpg?v=1615840832\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum Print Size:  195mmx115mmx50mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\n\u003ca name=\"_Toc58333248\"\u003e\u003c\/a\u003eNeeded Tools and Other Parts Not Supplied\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can find the small hardware assembly pack containing screws, spline and inserts to assemble the 3D Print.  You will need these tools:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDrill\u003c\/p\u003e\n\u003cp\u003eSmall Screwdrivers\u003c\/p\u003e\n\u003cp\u003eSmall files\u003c\/p\u003e\n\u003cp\u003eSuper Glue\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo assemble, you will need the following additional hardware:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-skycam-weathersense\" target=\"_blank\"\u003eSmall Hardware Parts for SkyCam or SkyWeather2 \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/IMG_5829_540x_8099a553-8be9-49d8-87a2-d21fdf79450f_480x480.jpg?v=1629047606\"\u003e\u003c\/p\u003e\n\u003ch1\u003eWant to print your own?\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_SolarSkyCam\" target=\"_blank\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(40960520814759, { variant: {"id":40960520814759,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0760-3DPRINTSKYCAM-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for WeatherSense SkyCam","public_title":null,"options":["Default Title"],"price":9500,"weight":227,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: -1, product_id: 6969783124135, product_handle: "3d-print-for-weathersense-skycam", price: 9500, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("solar-wireless-aftershock-earthquake-detector-weathersense", 6721670348967, {"id":6721670348967,"title":"Solar Wireless AfterShock Earthquake Detector - WeatherSense","handle":"solar-wireless-aftershock-earthquake-detector-weathersense","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eAfterShock!\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cdiv data-offset-key=\"fqjbg-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fqjbg-0-0\"\u003e\n\u003cspan data-offset-key=\"fqjbg-0-0\"\u003eEarthquakes!   If you have ever been in one, they are a shaking experience! AfterShock measures how strong the earthquake was \u003c\/span\u003e\u003cspan data-offset-key=\"fqjbg-0-1\"\u003eat your location\u003c\/span\u003e\u003cspan data-offset-key=\"fqjbg-0-2\"\u003e by measuring the shaking of the earth right at home.   Local! Local! Local!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"a448c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a448c-0-0\"\u003e\n\u003cspan data-offset-key=\"a448c-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"7ukm-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/175\/299\/3c76a6e4bd2441bc9d4e914e619d0886_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618788361\u0026amp;frame=1\u0026amp;s=9a4abf47ef44a26d5e0b7207bdc011ed\" role=\"presentation\" alt=\"\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/175\/299\/3c76a6e4bd2441bc9d4e914e619d0886_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618788361\u0026amp;frame=1\u0026amp;s=9a4abf47ef44a26d5e0b7207bdc011ed\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"3j958-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3j958-0-0\"\u003e\n\u003cspan data-offset-key=\"3j958-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"aausk-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aausk-0-0\"\u003e\n\u003cspan data-offset-key=\"aausk-0-0\"\u003eThis kit is easy to build and requires \u003c\/span\u003e\u003cspan data-offset-key=\"aausk-0-1\"\u003eNO SOLDERING!\u003c\/span\u003e\u003cspan data-offset-key=\"aausk-0-2\"\u003e   Great for your home, cabin or classroom.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aausk-0-0\"\u003e\u003cspan data-offset-key=\"aausk-0-2\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1la3o-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1la3o-0-0\"\u003e\n\u003cspan data-offset-key=\"1la3o-0-0\"\u003eThe WeatherSense AfterShock Sensor is the latest in the SwitchDoc Labs line of Solar Powered 433MHz environmental sensors designed to hook up with \u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-1\"\u003eyour Raspberry Pi\u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-2\"\u003e.    \u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-3\"\u003eAfterShock is a seismic sensor which is different than a seismograph\u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-4\"\u003e and is much less expensive.   AfterShock is designed to pick up earthquakes that could potentially damage your home, equipment or business.   It does not continuously report earth movement (such as caused by trucks or people walking), but only reports earth movement that AfterShock determines looks like an earthquake.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2mdn8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2mdn8-0-0\"\u003e\n\u003cspan data-offset-key=\"2mdn8-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"cgvvd-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/662\/4a8d9d27a493638c8bbbf2dda3b4de6c_original.gif?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458254\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=dd10e0894e6883fc09dc81a0506e20f9\" alt=\"Earthquake Distribution in the United States\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/662\/4a8d9d27a493638c8bbbf2dda3b4de6c_original.gif?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458254\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=dd10e0894e6883fc09dc81a0506e20f9\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eEarthquake Distribution in the United States\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"a3n80-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a3n80-0-0\"\u003e\n\u003cspan data-offset-key=\"a3n80-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"ke61-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ke61-0-0\"\u003e\n\u003cspan data-offset-key=\"ke61-0-0\"\u003eAfterShock \u003c\/span\u003e\u003cspan data-offset-key=\"ke61-0-1\"\u003euses a sophisticated algorithm to detect whether an earthquake has occurred  at your location and reports back how strong the earthquake (at your local location!) was using the SI (Seismic Instensity) Scale to your Raspberry Pi!   \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"7q2ov-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7q2ov-0-0\"\u003e\n\u003cspan data-offset-key=\"7q2ov-0-0\"\u003eComes with great open source software for the Rapsberry Pi!  \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-1\"\u003eAll of this  great data is saved by your Raspberry Pi receiving this data using a sophisticated Software Defined Radio (SDR).   More coolness.   And these are \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-2\"\u003esolar\u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-3\"\u003e powered!  \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-4\"\u003eNo messy power cords.\u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-5\"\u003e \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-6\"\u003eNo plugs.\u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-7\"\u003e Hang it up in a tree!   Oooo.  And all that wonderful solar power data (solar panels, battery and computer power) are sent back to your Pi too!   More Data!  More Cowbell!  These units will transmit about 100m (~300ft) depending on what you have between the unit and your receiver.  You can always add a bigger antenna however!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7q2ov-0-0\"\u003e\u003cspan data-offset-key=\"7q2ov-0-7\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4hdf-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\n\u003cspan data-offset-key=\"4hdf-0-0\"\u003eAt SwitchDoc Labs, we believe in providing projects that generate great data and great learning experiences.   With the WeatherSense products, you build the units, learn how they work and then you can modify them with all the software being \u003c\/span\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eOpen Source!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eDownloads\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockAssemblyAndTestManual1.1.pdf\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockAssemblyAndTestManual1.1.pdf\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eWeatherSense AfterShock Assembly and Test Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockWeatherProofingManual1.1.pdf\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockWeatherProofingManual1.1.pdf\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eWeatherSense AfterShock WeatherProofing and Test Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eWeatherSense  Raspberry Pi Software\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseAfterShock\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseAfterShock\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eAfterShock Arduino Software\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e3D Print Files for AfterShock (and WeatherSense AQ and Lightning)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"810c5-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\n\u003cspan data-offset-key=\"810c5-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\u003cspan data-offset-key=\"810c5-0-0\"\u003eWhat is in the AfterShock Kit?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\u003cspan data-offset-key=\"810c5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"ct0ip-0-0\"\u003e\n\u003cdiv data-offset-key=\"ct0ip-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"ct0ip-0-0\"\u003eSolar Powered Wireless WeatherSense AfterShock Earthquake Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"6ess7-0-0\"\u003e\n\u003cdiv data-offset-key=\"6ess7-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"6ess7-0-0\"\u003eThis is the complete kit for the Wireless AfterShock Sensor. Add on extras include a SDR (Software Defined Radio) for your Raspberry Pi, a 3D Print and pre-loaded SD Card. Raspberry Pi is not included.   A 3.7V LiPo Battery is not included.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"1vojc-0-0\"\u003e\n\u003cdiv data-offset-key=\"1vojc-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1vojc-0-0\"\u003eThe AQI Sensor Kit contains:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"58cg0-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"58cg0-0-0\"\u003e\n\u003cdiv data-offset-key=\"58cg0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"58cg0-0-0\"\u003eMini Pro Plus Low Power Computer\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"8af9a-0-0\"\u003e\n\u003cdiv data-offset-key=\"8af9a-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"8af9a-0-0\"\u003e433MHz Transmitter Board with Inside Antenna\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"d7c1-0-0\"\u003e\n\u003cdiv data-offset-key=\"d7c1-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"d7c1-0-0\"\u003eAfterShock Earthquake Sensor Board\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"5u8hr-0-0\"\u003e\n\u003cdiv data-offset-key=\"5u8hr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5u8hr-0-0\"\u003e330mA 6V Solar Power Cell\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"pv6m-0-0\"\u003e\n\u003cdiv data-offset-key=\"pv6m-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"pv6m-0-0\"\u003eSunAirPlus2 Solar Power Controller and Data Collector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"63m0-0-0\"\u003e\n\u003cdiv data-offset-key=\"63m0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"63m0-0-0\"\u003e2 -20cm Grove Cables\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"e0jfb-0-0\"\u003e\n\u003cdiv data-offset-key=\"e0jfb-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"e0jfb-0-0\"\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"10i72-0-0\"\u003e\n\u003cdiv data-offset-key=\"10i72-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"10i72-0-0\"\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cimg style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/621\/10c6d24eb5b18de91a43b586d0073c4e_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458135\u0026amp;frame=1\u0026amp;s=bf1eea7c961fe59940c27286becacecc\" alt=\"AfterShock Prototype Heading for the San Andreas Fault\" data-mce-style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/621\/10c6d24eb5b18de91a43b586d0073c4e_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458135\u0026amp;frame=1\u0026amp;s=bf1eea7c961fe59940c27286becacecc\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"6ab5t-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eAfterShock Prototype Heading for the San Andreas Fault\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"c9sjf-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"c9sjf-0-0\"\u003e\n\u003cspan data-offset-key=\"c9sjf-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"frph5-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"frph5-0-0\"\u003e\n\u003cspan data-offset-key=\"frph5-0-0\"\u003eThese WeatherSense Sensors are 100% compatible \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\"\u003e\u003cspan data-offset-key=\"frph5-1-0\"\u003ewith SkyWeather2.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"85saa-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"85saa-0-0\"\u003e\u003cspan data-offset-key=\"85saa-0-0\"\u003eWe installed our first beta version on the San Andreas Fault in Palm Springs.  No Kidding!  No Earthquakes yet!  But we can tell when the Pool Pumps come on!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1q5k7-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1q5k7-0-0\"\u003e\n\u003cspan data-offset-key=\"1q5k7-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"8r5a9-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg style=\"float: left;\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/442\/369\/62678ca0d0c2287e102346ac2d5ab5f5_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620506401\u0026amp;frame=1\u0026amp;s=d7b1d90de859db9b1f38c55d722b24b4\" alt=\"Bill Installing AfterShock on the San Andreas Fault in California\" data-mce-style=\"float: left;\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/442\/369\/62678ca0d0c2287e102346ac2d5ab5f5_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620506401\u0026amp;frame=1\u0026amp;s=d7b1d90de859db9b1f38c55d722b24b4\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eBill Installing AfterShock on the San Andreas Fault in California\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"4puo2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4puo2-0-0\"\u003e\n\u003cspan data-offset-key=\"4puo2-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ocij-0-0\"\u003e\u003cspan data-offset-key=\"ocij-0-0\"\u003eWhat is WeatherSense?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv data-offset-key=\"744a0-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"744a0-0-0\"\u003e\n\u003cspan data-offset-key=\"744a0-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"6b77u-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/017\/df303b134bb345d3bf29b3b162408e45_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469271\u0026amp;frame=1\u0026amp;s=cc60da9586ffd762a070eb331188af27\" role=\"presentation\" alt=\"\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/017\/df303b134bb345d3bf29b3b162408e45_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469271\u0026amp;frame=1\u0026amp;s=cc60da9586ffd762a070eb331188af27\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"57k1j-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"57k1j-0-0\"\u003e\n\u003cspan data-offset-key=\"57k1j-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"eqqka-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"eqqka-0-0\"\u003e\u003cspan data-offset-key=\"eqqka-0-0\"\u003eWeatherSense is a set of open source protocols and wireless  weather \/ environmental sensors for use with the Raspberry Pi.   You can see and modify the software to do what you like and tie it all into the SkyWeather2 Weather Station.  Or write your own!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2258c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2258c-0-0\"\u003e\u003cspan data-offset-key=\"2258c-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"648gv-0-0\"\u003e\u003cspan data-offset-key=\"648gv-0-0\"\u003eWhat Can I do with AfterShock in the Classroom?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"648gv-0-0\"\u003e\u003cspan data-offset-key=\"648gv-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3s6so-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3s6so-0-0\"\u003e\u003cspan data-offset-key=\"3s6so-0-0\"\u003eBuild your AfterShock box and before you mount it outside, have your students shake it and see the results on the Pi after two minutes.  Build a buildling out of blocks, and then shake it until it falls down with the sensor inside.   You will read the strength of your earthquake!!  You can also mount the box on a wire or a sensitive structure and you can measure people walking, hitting a table or other things.   During development, we could even pick up Dr. Shovic sitting his coffee cup down.   He also spilled coffee all over the prototype, but that is another story.......\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"83geq-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"83geq-0-0\"\u003e\u003cspan data-offset-key=\"83geq-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a4u5d-0-0\"\u003e\u003cspan data-offset-key=\"a4u5d-0-0\"\u003eWhat else do you need to use this kit?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul data-offset-key=\"8hngb-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"8hngb-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8hngb-0-0\"\u003e\u003cspan data-offset-key=\"8hngb-0-0\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"1dmin-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1dmin-0-0\"\u003e\u003cspan data-offset-key=\"1dmin-0-0\"\u003eA Compatible Software Defined Radio (We have one in the add-ons, but you can get one in many places on the network)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"21pa2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"21pa2-0-0\"\u003e\n\u003cspan data-offset-key=\"21pa2-0-0\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as  \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" data-mce-href=\"https:\/\/www.adafruit.com\/product\/353\"\u003e\u003cspan data-offset-key=\"21pa2-1-0\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"21pa2-2-0\"\u003e - if you get them off of Amazon, check the wiring.  Most of the batteries on Amazon are wired backwards - Fully discussed in manuals.  Here's a great website showing the problem: \u003c\/span\u003e\u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" data-mce-href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\"\u003e\u003cspan data-offset-key=\"21pa2-3-0\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"21pa2-4-0\"\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"cd23g-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cd23g-0-0\"\u003e\u003cspan data-offset-key=\"cd23g-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"avrjl-0-0\"\u003e\u003cspan data-offset-key=\"avrjl-0-0\"\u003eWhat does AfterShock Measure?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"avrjl-0-0\"\u003e\u003cspan data-offset-key=\"avrjl-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"62bv3-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"62bv3-0-0\"\u003e\n\u003cspan data-offset-key=\"62bv3-0-0\"\u003eAfterShock measures how much the ground is shaking at \u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-1\"\u003eyour location\u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-2\"\u003e.   It estimates how much damage could be done at \u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-3\"\u003eyour\u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-4\"\u003e house, cabin or apartment.  Whether you are there or not.   It measures two main things:   How far the earth was moving (in meters\/second) and how fast it was moving (along all three x,y, and z axes!) - acceleration (meters\/second**2).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"62bv3-0-0\"\u003e\u003cspan data-offset-key=\"62bv3-0-4\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2q73c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2q73c-0-0\"\u003e\u003cspan data-offset-key=\"2q73c-0-0\"\u003eAfterShock stores the information and also transmits the information via a wireless 433MHz link to your Raspberry Pi.  If you lose power, no problem!  AfterShock remembers the last earthquake and will transmit it every hour so when you Pi comes back on line, your Raspberry Pi can pick up and record the values.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"572nt-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"572nt-0-0\"\u003e\n\u003cspan data-offset-key=\"572nt-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"55ui8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/407\/682a8f2aff390f0f403e2889b0852028_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619457414\u0026amp;frame=1\u0026amp;s=c3e95b66e812a562c541ee29cb678b5b\" alt=\"AfterShock Block Diagram\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/407\/682a8f2aff390f0f403e2889b0852028_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619457414\u0026amp;frame=1\u0026amp;s=c3e95b66e812a562c541ee29cb678b5b\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eAfterShock Block Diagram\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"5nf8n-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5nf8n-0-0\"\u003eWhat is the Seismic Intensity Scale of Japan (SI)?\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5pg43-0-0\"\u003e\u003cspan data-offset-key=\"5pg43-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1lk9-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1lk9-0-0\"\u003e\u003cspan data-offset-key=\"1lk9-0-0\"\u003eThe Japan Meteorological Agency (JMA) Seismic Intensity Scale (k is a seismic intensity scale used in Japan to categorize the intensity of local ground shaking caused by earthquakes.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1lk9-0-0\"\u003e\u003cspan data-offset-key=\"1lk9-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"30jsv-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"30jsv-0-0\"\u003e\u003cspan data-offset-key=\"30jsv-0-0\"\u003eIntensities are expressed as numerical values called seismic intensity  (called shindo (震度) in Japan); the higher the value, the more intense the shaking. Values are derived from peak ground acceleration and duration of the shaking.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"66hlf-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"66hlf-0-0\"\u003e\u003cspan data-offset-key=\"66hlf-0-0\"\u003eThe spectral intensity (SI) equivalent to the magnitude of the destructive energy imposed by seismic motion on structures.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"66hlf-0-0\"\u003e\u003cspan data-offset-key=\"66hlf-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1asih-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1asih-0-0\"\u003e\u003cspan data-offset-key=\"1asih-0-0\"\u003eThe SI value, which is the average value of the integrated velocity response spectrum, is an index that expresses the destructive force of seismic motion and is highly correlated with the damage to structures.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"arfr1-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"arfr1-0-0\"\u003e\u003cspan data-offset-key=\"arfr1-0-0\"\u003eBelow is a chart of the local effects of earthquakes using the SI values that you get from AfterShock.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"f6sft-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f6sft-0-0\"\u003e\n\u003cspan data-offset-key=\"f6sft-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"1bco-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/172\/270\/833b34037bb07bd41d82bb93688c5520_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618768599\u0026amp;frame=1\u0026amp;s=fb426447115cbe16e572c3055287ea28\" alt=\"The AfterShock SI Master Chart\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/172\/270\/833b34037bb07bd41d82bb93688c5520_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618768599\u0026amp;frame=1\u0026amp;s=fb426447115cbe16e572c3055287ea28\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe AfterShock SI Master Chart\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"2ves7-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2ves7-0-0\"\u003e\n\u003cspan data-offset-key=\"2ves7-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"d5tuq-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"d5tuq-0-0\"\u003e\u003cspan data-offset-key=\"d5tuq-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"bvk1p-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"bvk1p-0-0\"\u003eWhat is the Difference between SI and the Momement Magnitude or the Richter Scale?\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"9aha2-0-0\"\u003e\u003cspan data-offset-key=\"9aha2-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"d243u-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"d243u-0-0\"\u003e\u003cspan data-offset-key=\"d243u-0-0\"\u003eSI should not be confused with magnitude  measurements like the moment magnitude (Mw) and the earlier Richter scales, which represent how much energy an earthquake releases. Much like the Mercalli scale, the SI scheme quantifies how much ground-surface shaking takes place at measurement sites distributed throughout an affected area. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"d243u-0-0\"\u003e\u003cspan data-offset-key=\"d243u-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"7orf8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7orf8-0-0\"\u003e\n\u003cspan data-offset-key=\"7orf8-0-0\"\u003eMw and the older Richter scale are measurements of how strong the earthquake was \u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-1\"\u003eat the epicenter of the earthquake\u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-2\"\u003ewhich AfterShock measures how strong the earthquake is \u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-3\"\u003eat your location\u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-4\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dqdk3-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dqdk3-0-0\"\u003e\u003cspan data-offset-key=\"dqdk3-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"as54d-0-0\"\u003e\u003cspan data-offset-key=\"as54d-0-0\"\u003eHow Sensitive is AfterShock and how can I test it?\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"5rftu-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5rftu-0-0\"\u003e\u003cspan data-offset-key=\"5rftu-0-0\"\u003eHow sensitive is the AfterShock sensor?  Depends on how you mount it.  Down on the ground or on a solid tree or post?  It will mostly respond to significant earthquakes.  That's how you want to install it.    You can detect other things (walking, coffee cups, trucks) by mounting on other types of things.  Experiment!  That's the whole point!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5rftu-0-0\"\u003e\u003cspan data-offset-key=\"5rftu-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"33dc-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"33dc-0-0\"\u003e\u003cspan data-offset-key=\"33dc-0-0\"\u003eTesting is easy. Pick the box up and drop it or tilt it.  2 minutes later, you will have the data on your Raspberry Pi.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"8o8ur-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8o8ur-0-0\"\u003e\u003cspan data-offset-key=\"8o8ur-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1ua6l-0-0\"\u003e\u003cspan data-offset-key=\"1ua6l-0-0\"\u003eWhat is a Software Defined Radio?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cfigure data-offset-key=\"ad1ff-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/685\/b4e735df7a6ac5aa6d3dab1bc8d52f21_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458317\u0026amp;frame=1\u0026amp;s=22e1967efaa1c91ba3ab320c42549ead\" alt=\"Raspberry Pi and Software Defined Radio\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/685\/b4e735df7a6ac5aa6d3dab1bc8d52f21_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458317\u0026amp;frame=1\u0026amp;s=22e1967efaa1c91ba3ab320c42549ead\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eRaspberry Pi and Software Defined Radio\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"9s3j6-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"9s3j6-0-0\"\u003e\n\u003cspan data-offset-key=\"9s3j6-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dv8fl-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dv8fl-0-0\"\u003e\u003cspan data-offset-key=\"dv8fl-0-0\"\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support.)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dk02c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dk02c-0-0\"\u003e\n\u003cspan data-offset-key=\"dk02c-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"dvvp0-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/690\/9c5f2747d10c69e94271209340ee8bf4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458354\u0026amp;frame=1\u0026amp;s=6ac013a922c7e727b78aab13b4cc0723\" alt=\"Software Defined Radio Block Diagram\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/690\/9c5f2747d10c69e94271209340ee8bf4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458354\u0026amp;frame=1\u0026amp;s=6ac013a922c7e727b78aab13b4cc0723\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSoftware Defined Radio Block Diagram\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"b78qm-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"b78qm-0-0\"\u003e\n\u003cspan data-offset-key=\"b78qm-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"e772-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"e772-0-0\"\u003e\n\u003cspan data-offset-key=\"e772-0-0\"\u003eThe SDR we are using with WeatherSense is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz.    SwitchDoc Labs has written drivers for the WeatherSense sensors and supplies the drivers to the community open source.   These are all available \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\"\u003e\u003cspan data-offset-key=\"e772-1-0\"\u003ein a pre-built SD Card image\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"e772-2-0\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"e772-0-0\"\u003e\u003cspan data-offset-key=\"e772-2-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cu9nk-0-0\"\u003e\u003cspan data-offset-key=\"cu9nk-0-0\"\u003eWeatherSense Raspberry Pi Software\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cu9nk-0-0\"\u003e\n\u003cspan data-offset-key=\"2sch6-0-0\"\u003eBut wait!  There is more.\u003c\/span\u003e\u003cspan data-offset-key=\"2sch6-0-1\"\u003e   The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi.   You can download the software from github.com\/switchdoclabs, download the included link to a SD Card Image or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"a58li-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a58li-0-0\"\u003e\u003cspan data-offset-key=\"a58li-0-0\"\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul data-offset-key=\"1o4dd-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"1o4dd-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1o4dd-0-0\"\u003e\u003cspan data-offset-key=\"1o4dd-0-0\"\u003eAll messages published on MQTT  (topic: weathersense\/#)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"1a8qs-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1a8qs-0-0\"\u003e\u003cspan data-offset-key=\"1a8qs-0-0\"\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"ehel1-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ehel1-0-0\"\u003e\u003cspan data-offset-key=\"ehel1-0-0\"\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"f9f79-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f9f79-0-0\"\u003e\u003cspan data-offset-key=\"f9f79-0-0\"\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"3qnn8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3qnn8-0-0\"\u003e\u003cspan data-offset-key=\"3qnn8-0-0\"\u003eThe WeatherSense software supports:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul data-offset-key=\"abkl1-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"abkl1-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"abkl1-0-0\"\u003e\u003cspan data-offset-key=\"abkl1-0-0\"\u003eWeatherSense AfterShock Earthquake Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"a2c80-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a2c80-0-0\"\u003e\u003cspan data-offset-key=\"a2c80-0-0\"\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"7ne18-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7ne18-0-0\"\u003e\u003cspan data-offset-key=\"7ne18-0-0\"\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"3cqpa-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3cqpa-0-0\"\u003e\u003cspan data-offset-key=\"3cqpa-0-0\"\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"bldh2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"bldh2-0-0\"\u003e\u003cspan data-offset-key=\"bldh2-0-0\"\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"4ekjh-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4ekjh-0-0\"\u003e\u003cspan data-offset-key=\"4ekjh-0-0\"\u003eWeatherSense WeatherCam (Coming soon)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"43vhs-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"43vhs-0-0\"\u003e\u003cspan data-offset-key=\"43vhs-0-0\"\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"43jl7-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"43jl7-0-0\"\u003e\u003cspan data-offset-key=\"43jl7-0-0\"\u003eAnd more WeatherSense sensors on the way!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3eqtr-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3eqtr-0-0\"\u003e\n\u003cspan data-offset-key=\"3eqtr-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"4nvr8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/082\/ecfdf335fa18111c49dd652d992fb65f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469518\u0026amp;frame=1\u0026amp;s=8aefa3268f6708ef2f73da102b7338d1\" alt=\"The WeatherSense Software Earthquake Display\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/082\/ecfdf335fa18111c49dd652d992fb65f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469518\u0026amp;frame=1\u0026amp;s=8aefa3268f6708ef2f73da102b7338d1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe WeatherSense Software Earthquake Display\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"8n9ea-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8n9ea-0-0\"\u003e\n\u003cspan data-offset-key=\"8n9ea-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"49ddf-0-0\"\u003e\u003cspan data-offset-key=\"49ddf-0-0\"\u003eThe WeatherSense Open Source Protocol\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"49ddf-0-0\"\u003e\u003cspan data-offset-key=\"49ddf-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"7vv43-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7vv43-0-0\"\u003e\u003cspan data-offset-key=\"7vv43-0-0\"\u003eAll of the WeatherSense devices use an open source protocol.  You know exactly what is begin transmitted and when.  You can even play with the source code to change what is being transmitted and where to receive it!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7vv43-0-0\"\u003e\u003cspan data-offset-key=\"7vv43-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"36pkl-0-0\"\u003e\u003cspan data-offset-key=\"36pkl-0-0\"\u003eThe Heart of AfterShock \u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"36pkl-0-0\"\u003e\u003cspan data-offset-key=\"36pkl-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"f1btk-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f1btk-0-0\"\u003e\u003cspan data-offset-key=\"f1btk-0-0\"\u003eThe CPU at the heart of these sensors is a 16MHz Arduino Pro Mini Low Power compatible CPU that has all the necessary connectors and hardware to keep the sensors running smoothly.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"ab49i-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ab49i-0-0\"\u003e\n\u003cspan data-offset-key=\"ab49i-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"3vq18-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/033\/240d3c9fb618270a209f7c5a4a6946e4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469323\u0026amp;frame=1\u0026amp;s=c6f5c54c85923136af5f535bb73ef8ab\" alt=\"SwitchDoc Labs Mini Pro Plus Low Power\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/033\/240d3c9fb618270a209f7c5a4a6946e4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469323\u0026amp;frame=1\u0026amp;s=c6f5c54c85923136af5f535bb73ef8ab\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSwitchDoc Labs Mini Pro Plus Low Power\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"cc7b6-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cc7b6-0-0\"\u003e\n\u003cspan data-offset-key=\"cc7b6-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aoaak-0-0\"\u003e\u003cspan data-offset-key=\"aoaak-0-0\"\u003eThe 3D Prints\u003c\/span\u003e\u003c\/h1\u003e\n\u003cfigure data-offset-key=\"51ba9-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/044\/1d3355a3e2f1f923b01bfd48f46338a8_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469359\u0026amp;frame=1\u0026amp;s=431588ed4bb1526647312026c7476b42\" role=\"presentation\" alt=\"\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/044\/1d3355a3e2f1f923b01bfd48f46338a8_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469359\u0026amp;frame=1\u0026amp;s=431588ed4bb1526647312026c7476b42\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"al9jj-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"al9jj-0-0\"\u003e\n\u003cspan data-offset-key=\"al9jj-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3sglr-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3sglr-0-0\"\u003e\u003cspan data-offset-key=\"3sglr-0-0\"\u003eWe provide STL files (and the 360 Fusion Design Files)  for AfterShock projects. Don't have a 3D Printer?   You can find them here.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3sglr-0-0\"\u003e\u003cspan data-offset-key=\"3sglr-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"27sur-0-0\"\u003e\u003cspan data-offset-key=\"27sur-0-0\"\u003eWhat is SkyWeather2?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"27sur-0-0\"\u003e\u003cspan data-offset-key=\"27sur-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2vggl-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2vggl-0-0\"\u003e\u003cspan data-offset-key=\"2vggl-0-0\"\u003eSkyWeather2 is a full blown DIY weather staiton.  \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eYou can find it here.\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2vggl-0-0\"\u003e\u003cspan data-offset-key=\"2vggl-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"eamsf-0-0\"\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"6kkh5-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003eTechnical Background\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\"The AfterShock Earthquake detector is one of the most fun projects that we have ever put together.   We got to build on the hardware and technology we developed for the Air Quality and Lightning Detector WeatherSense sensors and develop a board based on the D7S from Omron, a very cool Japanese company.\"\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"c9ghk-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"c9ghk-0-0\"\u003e\u003cspan data-offset-key=\"c9ghk-0-0\"\u003eThe AfterShock Earthquake detector works by using a 3 axis accelerometer to detect an movement in the X, Y and Z axis.  It records any movement in these directions and then puts the resulting signals through a sophisticated algorithm to determine whether this was an earthquake or just noise.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"g1p2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"g1p2-0-0\"\u003e\n\u003cspan data-offset-key=\"g1p2-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"d321k-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/285\/328\/44d067f1784492c4a67c775aeb76145f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619461395\u0026amp;frame=1\u0026amp;s=b70ff4315d177a53fe47588c86d705b1\" alt=\"An Earthquake in Progress\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/285\/328\/44d067f1784492c4a67c775aeb76145f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619461395\u0026amp;frame=1\u0026amp;s=b70ff4315d177a53fe47588c86d705b1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eAn Earthquake in Progress\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"5u75a-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5u75a-0-0\"\u003e\n\u003cspan data-offset-key=\"5u75a-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"cf542-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cf542-0-0\"\u003e\u003cspan data-offset-key=\"cf542-0-0\"\u003e As you can see from the below graph, there is a very high correlation between actual ground movements and what AfterShock detects.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"f1km4-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f1km4-0-0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-06-06T09:55:16-07:00","created_at":"2021-05-14T04:55:00-07:00","vendor":"SwitchDoc Labs","type":"","tags":[],"price":12000,"price_min":12000,"price_max":12000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40004619632807,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0758-WSAFTERSHOCK-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Solar Wireless AfterShock Earthquake Detector - WeatherSense","public_title":null,"options":["Default Title"],"price":12000,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/973DB321-CF6E-42E2-99AD-AC462496369E.jpg?v=1622817047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/boomdone2.png?v=1622817047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ASBlock.jpg?v=1622817047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3_5c636215-929a-4ed4-b14a-358af12d998e.jpg?v=1622817047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7085copy.jpg?v=1622817047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_96f99985-ede2-4af3-9581-8fee1be435d5.jpg?v=1622817047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7097.jpg?v=1622817047","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/AfterShockAlgorithm.png?v=1622817047","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/AfterShockChart.png?v=1622817047"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/973DB321-CF6E-42E2-99AD-AC462496369E.jpg?v=1622817047","options":["Title"],"media":[{"alt":null,"id":21754615693479,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3018,"width":3018,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/973DB321-CF6E-42E2-99AD-AC462496369E.jpg?v=1622817047"},"aspect_ratio":1.0,"height":3018,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/973DB321-CF6E-42E2-99AD-AC462496369E.jpg?v=1622817047","width":3018},{"alt":null,"id":21754639483047,"position":2,"preview_image":{"aspect_ratio":0.889,"height":540,"width":480,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/boomdone2.png?v=1622817047"},"aspect_ratio":0.889,"height":540,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/boomdone2.png?v=1622817047","width":480},{"alt":null,"id":21754639122599,"position":3,"preview_image":{"aspect_ratio":1.414,"height":1191,"width":1684,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ASBlock.jpg?v=1622817047"},"aspect_ratio":1.414,"height":1191,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ASBlock.jpg?v=1622817047","width":1684},{"alt":null,"id":21754729595047,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3_5c636215-929a-4ed4-b14a-358af12d998e.jpg?v=1622817047"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/3_5c636215-929a-4ed4-b14a-358af12d998e.jpg?v=1622817047","width":1000},{"alt":null,"id":21754608582823,"position":5,"preview_image":{"aspect_ratio":1.304,"height":661,"width":862,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7085copy.jpg?v=1622817047"},"aspect_ratio":1.304,"height":661,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7085copy.jpg?v=1622817047","width":862},{"alt":null,"id":21754628800679,"position":6,"preview_image":{"aspect_ratio":1.563,"height":435,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_96f99985-ede2-4af3-9581-8fee1be435d5.jpg?v=1622817047"},"aspect_ratio":1.563,"height":435,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/4b8c132ae8dc238d94f2d216109813be_original.JPG_96f99985-ede2-4af3-9581-8fee1be435d5.jpg?v=1622817047","width":680},{"alt":null,"id":21754629750951,"position":7,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7097.jpg?v=1622817047"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_7097.jpg?v=1622817047","width":4032},{"alt":null,"id":21754634305703,"position":8,"preview_image":{"aspect_ratio":2.608,"height":851,"width":2219,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/AfterShockAlgorithm.png?v=1622817047"},"aspect_ratio":2.608,"height":851,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/AfterShockAlgorithm.png?v=1622817047","width":2219},{"alt":null,"id":21754638893223,"position":9,"preview_image":{"aspect_ratio":0.8,"height":4733,"width":3785,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/AfterShockChart.png?v=1622817047"},"aspect_ratio":0.8,"height":4733,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/AfterShockChart.png?v=1622817047","width":3785},{"alt":null,"id":21754861650087,"position":10,"preview_image":{"aspect_ratio":1.778,"height":1080,"width":1920,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/9b01cf66d3fb402881a9dd9888a5a064.thumbnail.0000000.jpg?v=1622764267"},"aspect_ratio":1.779,"duration":59826,"media_type":"video","sources":[{"format":"mp4","height":480,"mime_type":"video\/mp4","url":"https:\/\/cdn.shopify.com\/videos\/c\/vp\/9b01cf66d3fb402881a9dd9888a5a064\/9b01cf66d3fb402881a9dd9888a5a064.SD-480p-1.5Mbps.mp4","width":854},{"format":"mp4","height":720,"mime_type":"video\/mp4","url":"https:\/\/cdn.shopify.com\/videos\/c\/vp\/9b01cf66d3fb402881a9dd9888a5a064\/9b01cf66d3fb402881a9dd9888a5a064.HD-720p-4.5Mbps.mp4","width":1280},{"format":"mp4","height":1080,"mime_type":"video\/mp4","url":"https:\/\/cdn.shopify.com\/videos\/c\/vp\/9b01cf66d3fb402881a9dd9888a5a064\/9b01cf66d3fb402881a9dd9888a5a064.HD-1080p-7.2Mbps.mp4","width":1920},{"format":"m3u8","height":1080,"mime_type":"application\/x-mpegURL","url":"https:\/\/cdn.shopify.com\/videos\/c\/vp\/9b01cf66d3fb402881a9dd9888a5a064\/9b01cf66d3fb402881a9dd9888a5a064.m3u8","width":1920}]}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch1\u003eHow to Choose your SkyWeather2 Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/2021\/11\/skyweather2-and-weathersense-buyer-configuration-guide\/\"\u003eCheck out the buyers guide here. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eAfterShock!\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cdiv data-offset-key=\"fqjbg-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"fqjbg-0-0\"\u003e\n\u003cspan data-offset-key=\"fqjbg-0-0\"\u003eEarthquakes!   If you have ever been in one, they are a shaking experience! AfterShock measures how strong the earthquake was \u003c\/span\u003e\u003cspan data-offset-key=\"fqjbg-0-1\"\u003eat your location\u003c\/span\u003e\u003cspan data-offset-key=\"fqjbg-0-2\"\u003e by measuring the shaking of the earth right at home.   Local! Local! Local!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"a448c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a448c-0-0\"\u003e\n\u003cspan data-offset-key=\"a448c-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"7ukm-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/175\/299\/3c76a6e4bd2441bc9d4e914e619d0886_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618788361\u0026amp;frame=1\u0026amp;s=9a4abf47ef44a26d5e0b7207bdc011ed\" role=\"presentation\" alt=\"\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/175\/299\/3c76a6e4bd2441bc9d4e914e619d0886_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618788361\u0026amp;frame=1\u0026amp;s=9a4abf47ef44a26d5e0b7207bdc011ed\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"3j958-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3j958-0-0\"\u003e\n\u003cspan data-offset-key=\"3j958-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"aausk-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aausk-0-0\"\u003e\n\u003cspan data-offset-key=\"aausk-0-0\"\u003eThis kit is easy to build and requires \u003c\/span\u003e\u003cspan data-offset-key=\"aausk-0-1\"\u003eNO SOLDERING!\u003c\/span\u003e\u003cspan data-offset-key=\"aausk-0-2\"\u003e   Great for your home, cabin or classroom.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aausk-0-0\"\u003e\u003cspan data-offset-key=\"aausk-0-2\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1la3o-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1la3o-0-0\"\u003e\n\u003cspan data-offset-key=\"1la3o-0-0\"\u003eThe WeatherSense AfterShock Sensor is the latest in the SwitchDoc Labs line of Solar Powered 433MHz environmental sensors designed to hook up with \u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-1\"\u003eyour Raspberry Pi\u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-2\"\u003e.    \u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-3\"\u003eAfterShock is a seismic sensor which is different than a seismograph\u003c\/span\u003e\u003cspan data-offset-key=\"1la3o-0-4\"\u003e and is much less expensive.   AfterShock is designed to pick up earthquakes that could potentially damage your home, equipment or business.   It does not continuously report earth movement (such as caused by trucks or people walking), but only reports earth movement that AfterShock determines looks like an earthquake.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2mdn8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2mdn8-0-0\"\u003e\n\u003cspan data-offset-key=\"2mdn8-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"cgvvd-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/662\/4a8d9d27a493638c8bbbf2dda3b4de6c_original.gif?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458254\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=dd10e0894e6883fc09dc81a0506e20f9\" alt=\"Earthquake Distribution in the United States\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/662\/4a8d9d27a493638c8bbbf2dda3b4de6c_original.gif?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458254\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=dd10e0894e6883fc09dc81a0506e20f9\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eEarthquake Distribution in the United States\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"a3n80-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a3n80-0-0\"\u003e\n\u003cspan data-offset-key=\"a3n80-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"ke61-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ke61-0-0\"\u003e\n\u003cspan data-offset-key=\"ke61-0-0\"\u003eAfterShock \u003c\/span\u003e\u003cspan data-offset-key=\"ke61-0-1\"\u003euses a sophisticated algorithm to detect whether an earthquake has occurred  at your location and reports back how strong the earthquake (at your local location!) was using the SI (Seismic Instensity) Scale to your Raspberry Pi!   \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"7q2ov-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7q2ov-0-0\"\u003e\n\u003cspan data-offset-key=\"7q2ov-0-0\"\u003eComes with great open source software for the Rapsberry Pi!  \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-1\"\u003eAll of this  great data is saved by your Raspberry Pi receiving this data using a sophisticated Software Defined Radio (SDR).   More coolness.   And these are \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-2\"\u003esolar\u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-3\"\u003e powered!  \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-4\"\u003eNo messy power cords.\u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-5\"\u003e \u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-6\"\u003eNo plugs.\u003c\/span\u003e\u003cspan data-offset-key=\"7q2ov-0-7\"\u003e Hang it up in a tree!   Oooo.  And all that wonderful solar power data (solar panels, battery and computer power) are sent back to your Pi too!   More Data!  More Cowbell!  These units will transmit about 100m (~300ft) depending on what you have between the unit and your receiver.  You can always add a bigger antenna however!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7q2ov-0-0\"\u003e\u003cspan data-offset-key=\"7q2ov-0-7\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"4hdf-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\n\u003cspan data-offset-key=\"4hdf-0-0\"\u003eAt SwitchDoc Labs, we believe in providing projects that generate great data and great learning experiences.   With the WeatherSense products, you build the units, learn how they work and then you can modify them with all the software being \u003c\/span\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eOpen Source!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eDownloads\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockAssemblyAndTestManual1.1.pdf\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockAssemblyAndTestManual1.1.pdf\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eWeatherSense AfterShock Assembly and Test Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockWeatherProofingManual1.1.pdf\" target=\"_blank\" data-mce-href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2021\/06\/AfterShockWeatherProofingManual1.1.pdf\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eWeatherSense AfterShock WeatherProofing and Test Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eWeatherSense  Raspberry Pi Software\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseAfterShock\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseAfterShock\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003eAfterShock Arduino Software\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\" target=\"_blank\" data-mce-href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_WeatherSenseAQLightning\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e3D Print Files for AfterShock (and WeatherSense AQ and Lightning)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4hdf-0-0\"\u003e\u003cspan data-offset-key=\"4hdf-0-1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"810c5-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\n\u003cspan data-offset-key=\"810c5-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\u003cspan data-offset-key=\"810c5-0-0\"\u003eWhat is in the AfterShock Kit?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\u003cspan data-offset-key=\"810c5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"810c5-0-0\"\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"ct0ip-0-0\"\u003e\n\u003cdiv data-offset-key=\"ct0ip-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"ct0ip-0-0\"\u003eSolar Powered Wireless WeatherSense AfterShock Earthquake Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"6ess7-0-0\"\u003e\n\u003cdiv data-offset-key=\"6ess7-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"6ess7-0-0\"\u003eThis is the complete kit for the Wireless AfterShock Sensor. Add on extras include a SDR (Software Defined Radio) for your Raspberry Pi, a 3D Print and pre-loaded SD Card. Raspberry Pi is not included.   A 3.7V LiPo Battery is not included.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb1\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"1vojc-0-0\"\u003e\n\u003cdiv data-offset-key=\"1vojc-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"1vojc-0-0\"\u003eThe AQI Sensor Kit contains:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"public-DraftStyleDefault-ul\" data-offset-key=\"58cg0-0-0\"\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"58cg0-0-0\"\u003e\n\u003cdiv data-offset-key=\"58cg0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"58cg0-0-0\"\u003eMini Pro Plus Low Power Computer\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"8af9a-0-0\"\u003e\n\u003cdiv data-offset-key=\"8af9a-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"8af9a-0-0\"\u003e433MHz Transmitter Board with Inside Antenna\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"d7c1-0-0\"\u003e\n\u003cdiv data-offset-key=\"d7c1-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"d7c1-0-0\"\u003eAfterShock Earthquake Sensor Board\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"5u8hr-0-0\"\u003e\n\u003cdiv data-offset-key=\"5u8hr-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"5u8hr-0-0\"\u003e330mA 6V Solar Power Cell\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"pv6m-0-0\"\u003e\n\u003cdiv data-offset-key=\"pv6m-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"pv6m-0-0\"\u003eSunAirPlus2 Solar Power Controller and Data Collector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"63m0-0-0\"\u003e\n\u003cdiv data-offset-key=\"63m0-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"63m0-0-0\"\u003e2 -20cm Grove Cables\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"e0jfb-0-0\"\u003e\n\u003cdiv data-offset-key=\"e0jfb-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"e0jfb-0-0\"\u003eShort USB A to USB Micro Cable\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\" data-block=\"true\" data-editor=\"e2tam\" data-offset-key=\"10i72-0-0\"\u003e\n\u003cdiv data-offset-key=\"10i72-0-0\" class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\"\u003e\u003cspan data-offset-key=\"10i72-0-0\"\u003eLinks to Full Documentation and Assembly Instructions\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cimg style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/621\/10c6d24eb5b18de91a43b586d0073c4e_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458135\u0026amp;frame=1\u0026amp;s=bf1eea7c961fe59940c27286becacecc\" alt=\"AfterShock Prototype Heading for the San Andreas Fault\" data-mce-style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/621\/10c6d24eb5b18de91a43b586d0073c4e_original.JPG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458135\u0026amp;frame=1\u0026amp;s=bf1eea7c961fe59940c27286becacecc\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"6ab5t-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eAfterShock Prototype Heading for the San Andreas Fault\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"c9sjf-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"c9sjf-0-0\"\u003e\n\u003cspan data-offset-key=\"c9sjf-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"frph5-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"frph5-0-0\"\u003e\n\u003cspan data-offset-key=\"frph5-0-0\"\u003eThese WeatherSense Sensors are 100% compatible \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\"\u003e\u003cspan data-offset-key=\"frph5-1-0\"\u003ewith SkyWeather2.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"85saa-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"85saa-0-0\"\u003e\u003cspan data-offset-key=\"85saa-0-0\"\u003eWe installed our first beta version on the San Andreas Fault in Palm Springs.  No Kidding!  No Earthquakes yet!  But we can tell when the Pool Pumps come on!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1q5k7-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1q5k7-0-0\"\u003e\n\u003cspan data-offset-key=\"1q5k7-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"8r5a9-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg style=\"float: left;\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/442\/369\/62678ca0d0c2287e102346ac2d5ab5f5_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620506401\u0026amp;frame=1\u0026amp;s=d7b1d90de859db9b1f38c55d722b24b4\" alt=\"Bill Installing AfterShock on the San Andreas Fault in California\" data-mce-style=\"float: left;\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/442\/369\/62678ca0d0c2287e102346ac2d5ab5f5_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620506401\u0026amp;frame=1\u0026amp;s=d7b1d90de859db9b1f38c55d722b24b4\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eBill Installing AfterShock on the San Andreas Fault in California\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"4puo2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4puo2-0-0\"\u003e\n\u003cspan data-offset-key=\"4puo2-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ocij-0-0\"\u003e\u003cspan data-offset-key=\"ocij-0-0\"\u003eWhat is WeatherSense?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv data-offset-key=\"744a0-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"744a0-0-0\"\u003e\n\u003cspan data-offset-key=\"744a0-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"6b77u-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/017\/df303b134bb345d3bf29b3b162408e45_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469271\u0026amp;frame=1\u0026amp;s=cc60da9586ffd762a070eb331188af27\" role=\"presentation\" alt=\"\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/017\/df303b134bb345d3bf29b3b162408e45_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469271\u0026amp;frame=1\u0026amp;s=cc60da9586ffd762a070eb331188af27\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"57k1j-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"57k1j-0-0\"\u003e\n\u003cspan data-offset-key=\"57k1j-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"eqqka-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"eqqka-0-0\"\u003e\u003cspan data-offset-key=\"eqqka-0-0\"\u003eWeatherSense is a set of open source protocols and wireless  weather \/ environmental sensors for use with the Raspberry Pi.   You can see and modify the software to do what you like and tie it all into the SkyWeather2 Weather Station.  Or write your own!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2258c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2258c-0-0\"\u003e\u003cspan data-offset-key=\"2258c-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"648gv-0-0\"\u003e\u003cspan data-offset-key=\"648gv-0-0\"\u003eWhat Can I do with AfterShock in the Classroom?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"648gv-0-0\"\u003e\u003cspan data-offset-key=\"648gv-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3s6so-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3s6so-0-0\"\u003e\u003cspan data-offset-key=\"3s6so-0-0\"\u003eBuild your AfterShock box and before you mount it outside, have your students shake it and see the results on the Pi after two minutes.  Build a buildling out of blocks, and then shake it until it falls down with the sensor inside.   You will read the strength of your earthquake!!  You can also mount the box on a wire or a sensitive structure and you can measure people walking, hitting a table or other things.   During development, we could even pick up Dr. Shovic sitting his coffee cup down.   He also spilled coffee all over the prototype, but that is another story.......\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"83geq-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"83geq-0-0\"\u003e\u003cspan data-offset-key=\"83geq-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a4u5d-0-0\"\u003e\u003cspan data-offset-key=\"a4u5d-0-0\"\u003eWhat else do you need to use this kit?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul data-offset-key=\"8hngb-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"8hngb-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8hngb-0-0\"\u003e\u003cspan data-offset-key=\"8hngb-0-0\"\u003eA Raspberry Pi (Pi 4B, 3B+, PiZeroW tested and work)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"1dmin-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1dmin-0-0\"\u003e\u003cspan data-offset-key=\"1dmin-0-0\"\u003eA Compatible Software Defined Radio (We have one in the add-ons, but you can get one in many places on the network)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"21pa2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"21pa2-0-0\"\u003e\n\u003cspan data-offset-key=\"21pa2-0-0\"\u003e3.7V LiPo Battery - See documentation for suggestions - such as  \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/353\" data-mce-href=\"https:\/\/www.adafruit.com\/product\/353\"\u003e\u003cspan data-offset-key=\"21pa2-1-0\"\u003ehttps:\/\/www.adafruit.com\/product\/353\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"21pa2-2-0\"\u003e - if you get them off of Amazon, check the wiring.  Most of the batteries on Amazon are wired backwards - Fully discussed in manuals.  Here's a great website showing the problem: \u003c\/span\u003e\u003ca href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\" data-mce-href=\"https:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\"\u003e\u003cspan data-offset-key=\"21pa2-3-0\"\u003ehttps:\/\/docs.particle.io\/tutorials\/learn-more\/batteries\/\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"21pa2-4-0\"\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"cd23g-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cd23g-0-0\"\u003e\u003cspan data-offset-key=\"cd23g-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"avrjl-0-0\"\u003e\u003cspan data-offset-key=\"avrjl-0-0\"\u003eWhat does AfterShock Measure?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"avrjl-0-0\"\u003e\u003cspan data-offset-key=\"avrjl-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"62bv3-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"62bv3-0-0\"\u003e\n\u003cspan data-offset-key=\"62bv3-0-0\"\u003eAfterShock measures how much the ground is shaking at \u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-1\"\u003eyour location\u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-2\"\u003e.   It estimates how much damage could be done at \u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-3\"\u003eyour\u003c\/span\u003e\u003cspan data-offset-key=\"62bv3-0-4\"\u003e house, cabin or apartment.  Whether you are there or not.   It measures two main things:   How far the earth was moving (in meters\/second) and how fast it was moving (along all three x,y, and z axes!) - acceleration (meters\/second**2).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"62bv3-0-0\"\u003e\u003cspan data-offset-key=\"62bv3-0-4\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2q73c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2q73c-0-0\"\u003e\u003cspan data-offset-key=\"2q73c-0-0\"\u003eAfterShock stores the information and also transmits the information via a wireless 433MHz link to your Raspberry Pi.  If you lose power, no problem!  AfterShock remembers the last earthquake and will transmit it every hour so when you Pi comes back on line, your Raspberry Pi can pick up and record the values.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"572nt-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"572nt-0-0\"\u003e\n\u003cspan data-offset-key=\"572nt-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"55ui8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/407\/682a8f2aff390f0f403e2889b0852028_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619457414\u0026amp;frame=1\u0026amp;s=c3e95b66e812a562c541ee29cb678b5b\" alt=\"AfterShock Block Diagram\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/407\/682a8f2aff390f0f403e2889b0852028_original.PNG?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619457414\u0026amp;frame=1\u0026amp;s=c3e95b66e812a562c541ee29cb678b5b\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eAfterShock Block Diagram\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"5nf8n-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5nf8n-0-0\"\u003eWhat is the Seismic Intensity Scale of Japan (SI)?\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5pg43-0-0\"\u003e\u003cspan data-offset-key=\"5pg43-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1lk9-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1lk9-0-0\"\u003e\u003cspan data-offset-key=\"1lk9-0-0\"\u003eThe Japan Meteorological Agency (JMA) Seismic Intensity Scale (k is a seismic intensity scale used in Japan to categorize the intensity of local ground shaking caused by earthquakes.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1lk9-0-0\"\u003e\u003cspan data-offset-key=\"1lk9-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"30jsv-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"30jsv-0-0\"\u003e\u003cspan data-offset-key=\"30jsv-0-0\"\u003eIntensities are expressed as numerical values called seismic intensity  (called shindo (震度) in Japan); the higher the value, the more intense the shaking. Values are derived from peak ground acceleration and duration of the shaking.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"66hlf-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"66hlf-0-0\"\u003e\u003cspan data-offset-key=\"66hlf-0-0\"\u003eThe spectral intensity (SI) equivalent to the magnitude of the destructive energy imposed by seismic motion on structures.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"66hlf-0-0\"\u003e\u003cspan data-offset-key=\"66hlf-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"1asih-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1asih-0-0\"\u003e\u003cspan data-offset-key=\"1asih-0-0\"\u003eThe SI value, which is the average value of the integrated velocity response spectrum, is an index that expresses the destructive force of seismic motion and is highly correlated with the damage to structures.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"arfr1-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"arfr1-0-0\"\u003e\u003cspan data-offset-key=\"arfr1-0-0\"\u003eBelow is a chart of the local effects of earthquakes using the SI values that you get from AfterShock.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"f6sft-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f6sft-0-0\"\u003e\n\u003cspan data-offset-key=\"f6sft-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"1bco-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/172\/270\/833b34037bb07bd41d82bb93688c5520_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618768599\u0026amp;frame=1\u0026amp;s=fb426447115cbe16e572c3055287ea28\" alt=\"The AfterShock SI Master Chart\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/172\/270\/833b34037bb07bd41d82bb93688c5520_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1618768599\u0026amp;frame=1\u0026amp;s=fb426447115cbe16e572c3055287ea28\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe AfterShock SI Master Chart\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"2ves7-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2ves7-0-0\"\u003e\n\u003cspan data-offset-key=\"2ves7-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"d5tuq-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"d5tuq-0-0\"\u003e\u003cspan data-offset-key=\"d5tuq-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"bvk1p-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"bvk1p-0-0\"\u003eWhat is the Difference between SI and the Momement Magnitude or the Richter Scale?\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"9aha2-0-0\"\u003e\u003cspan data-offset-key=\"9aha2-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"d243u-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"d243u-0-0\"\u003e\u003cspan data-offset-key=\"d243u-0-0\"\u003eSI should not be confused with magnitude  measurements like the moment magnitude (Mw) and the earlier Richter scales, which represent how much energy an earthquake releases. Much like the Mercalli scale, the SI scheme quantifies how much ground-surface shaking takes place at measurement sites distributed throughout an affected area. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"d243u-0-0\"\u003e\u003cspan data-offset-key=\"d243u-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"7orf8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7orf8-0-0\"\u003e\n\u003cspan data-offset-key=\"7orf8-0-0\"\u003eMw and the older Richter scale are measurements of how strong the earthquake was \u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-1\"\u003eat the epicenter of the earthquake\u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-2\"\u003ewhich AfterShock measures how strong the earthquake is \u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-3\"\u003eat your location\u003c\/span\u003e\u003cspan data-offset-key=\"7orf8-0-4\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dqdk3-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dqdk3-0-0\"\u003e\u003cspan data-offset-key=\"dqdk3-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"as54d-0-0\"\u003e\u003cspan data-offset-key=\"as54d-0-0\"\u003eHow Sensitive is AfterShock and how can I test it?\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"5rftu-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5rftu-0-0\"\u003e\u003cspan data-offset-key=\"5rftu-0-0\"\u003eHow sensitive is the AfterShock sensor?  Depends on how you mount it.  Down on the ground or on a solid tree or post?  It will mostly respond to significant earthquakes.  That's how you want to install it.    You can detect other things (walking, coffee cups, trucks) by mounting on other types of things.  Experiment!  That's the whole point!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5rftu-0-0\"\u003e\u003cspan data-offset-key=\"5rftu-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"33dc-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"33dc-0-0\"\u003e\u003cspan data-offset-key=\"33dc-0-0\"\u003eTesting is easy. Pick the box up and drop it or tilt it.  2 minutes later, you will have the data on your Raspberry Pi.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"8o8ur-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8o8ur-0-0\"\u003e\u003cspan data-offset-key=\"8o8ur-0-0\"\u003e\u003cbr data-text=\"true\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1ua6l-0-0\"\u003e\u003cspan data-offset-key=\"1ua6l-0-0\"\u003eWhat is a Software Defined Radio?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cfigure data-offset-key=\"ad1ff-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/685\/b4e735df7a6ac5aa6d3dab1bc8d52f21_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458317\u0026amp;frame=1\u0026amp;s=22e1967efaa1c91ba3ab320c42549ead\" alt=\"Raspberry Pi and Software Defined Radio\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/685\/b4e735df7a6ac5aa6d3dab1bc8d52f21_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458317\u0026amp;frame=1\u0026amp;s=22e1967efaa1c91ba3ab320c42549ead\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eRaspberry Pi and Software Defined Radio\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"9s3j6-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"9s3j6-0-0\"\u003e\n\u003cspan data-offset-key=\"9s3j6-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dv8fl-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dv8fl-0-0\"\u003e\u003cspan data-offset-key=\"dv8fl-0-0\"\u003eA Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators\/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system (still with significant hardware support.)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"dk02c-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"dk02c-0-0\"\u003e\n\u003cspan data-offset-key=\"dk02c-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"dvvp0-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/690\/9c5f2747d10c69e94271209340ee8bf4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458354\u0026amp;frame=1\u0026amp;s=6ac013a922c7e727b78aab13b4cc0723\" alt=\"Software Defined Radio Block Diagram\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/284\/690\/9c5f2747d10c69e94271209340ee8bf4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619458354\u0026amp;frame=1\u0026amp;s=6ac013a922c7e727b78aab13b4cc0723\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSoftware Defined Radio Block Diagram\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"b78qm-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"b78qm-0-0\"\u003e\n\u003cspan data-offset-key=\"b78qm-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"e772-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"e772-0-0\"\u003e\n\u003cspan data-offset-key=\"e772-0-0\"\u003eThe SDR we are using with WeatherSense is based on the powerful RTL2832U and R820T tuner, it can tune into signals from 24MHz to 1850MHz.    SwitchDoc Labs has written drivers for the WeatherSense sensors and supplies the drivers to the community open source.   These are all available \u003c\/span\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\" data-mce-href=\"https:\/\/shop.switchdoc.com\/products\/16gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\"\u003e\u003cspan data-offset-key=\"e772-1-0\"\u003ein a pre-built SD Card image\u003c\/span\u003e\u003c\/a\u003e\u003cspan data-offset-key=\"e772-2-0\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"e772-0-0\"\u003e\u003cspan data-offset-key=\"e772-2-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cu9nk-0-0\"\u003e\u003cspan data-offset-key=\"cu9nk-0-0\"\u003eWeatherSense Raspberry Pi Software\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cu9nk-0-0\"\u003e\n\u003cspan data-offset-key=\"2sch6-0-0\"\u003eBut wait!  There is more.\u003c\/span\u003e\u003cspan data-offset-key=\"2sch6-0-1\"\u003e   The Wireless WeatherSense kits come with a full set of open source software for your Raspberry Pi.   You can download the software from github.com\/switchdoclabs, download the included link to a SD Card Image or add-on a pre-formatted SD Card with all these goodies already on the card for a simpler experience.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"a58li-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a58li-0-0\"\u003e\u003cspan data-offset-key=\"a58li-0-0\"\u003eThe WeatherSense Raspberry Pi software includes:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul data-offset-key=\"1o4dd-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"1o4dd-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1o4dd-0-0\"\u003e\u003cspan data-offset-key=\"1o4dd-0-0\"\u003eAll messages published on MQTT  (topic: weathersense\/#)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"1a8qs-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"1a8qs-0-0\"\u003e\u003cspan data-offset-key=\"1a8qs-0-0\"\u003eInstalled rtl_433 433MHz open source drivers\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"ehel1-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ehel1-0-0\"\u003e\u003cspan data-offset-key=\"ehel1-0-0\"\u003eWeatherSense open source database program - stores your data!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"f9f79-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f9f79-0-0\"\u003e\u003cspan data-offset-key=\"f9f79-0-0\"\u003eA dash_app ready to display and analyize your data from all the WeatherSense sensors!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"3qnn8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3qnn8-0-0\"\u003e\u003cspan data-offset-key=\"3qnn8-0-0\"\u003eThe WeatherSense software supports:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul data-offset-key=\"abkl1-0-0\" class=\"public-DraftStyleDefault-ul\"\u003e\n\u003cli data-offset-key=\"abkl1-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-reset public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"abkl1-0-0\"\u003e\u003cspan data-offset-key=\"abkl1-0-0\"\u003eWeatherSense AfterShock Earthquake Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"a2c80-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"a2c80-0-0\"\u003e\u003cspan data-offset-key=\"a2c80-0-0\"\u003eWeatherSense WeatherRack2\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"7ne18-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7ne18-0-0\"\u003e\u003cspan data-offset-key=\"7ne18-0-0\"\u003eWeatherSense Indoor T\/H Sensors\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"3cqpa-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3cqpa-0-0\"\u003e\u003cspan data-offset-key=\"3cqpa-0-0\"\u003eWeatherSense AQI Sensor\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"bldh2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"bldh2-0-0\"\u003e\u003cspan data-offset-key=\"bldh2-0-0\"\u003eWeatherSense Lightning Detector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"4ekjh-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"4ekjh-0-0\"\u003e\u003cspan data-offset-key=\"4ekjh-0-0\"\u003eWeatherSense WeatherCam (Coming soon)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-offset-key=\"43vhs-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"public-DraftStyleDefault-unorderedListItem public-DraftStyleDefault-depth0 public-DraftStyleDefault-listLTR\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"43vhs-0-0\"\u003e\u003cspan data-offset-key=\"43vhs-0-0\"\u003eWeatherSense SolarMAX2 Solar Power System and Controller (Coming Soon)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-offset-key=\"43jl7-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"43jl7-0-0\"\u003e\u003cspan data-offset-key=\"43jl7-0-0\"\u003eAnd more WeatherSense sensors on the way!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3eqtr-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3eqtr-0-0\"\u003e\n\u003cspan data-offset-key=\"3eqtr-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"4nvr8-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/082\/ecfdf335fa18111c49dd652d992fb65f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469518\u0026amp;frame=1\u0026amp;s=8aefa3268f6708ef2f73da102b7338d1\" alt=\"The WeatherSense Software Earthquake Display\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/082\/ecfdf335fa18111c49dd652d992fb65f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469518\u0026amp;frame=1\u0026amp;s=8aefa3268f6708ef2f73da102b7338d1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eThe WeatherSense Software Earthquake Display\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"8n9ea-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"8n9ea-0-0\"\u003e\n\u003cspan data-offset-key=\"8n9ea-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"49ddf-0-0\"\u003e\u003cspan data-offset-key=\"49ddf-0-0\"\u003eThe WeatherSense Open Source Protocol\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"49ddf-0-0\"\u003e\u003cspan data-offset-key=\"49ddf-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"7vv43-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7vv43-0-0\"\u003e\u003cspan data-offset-key=\"7vv43-0-0\"\u003eAll of the WeatherSense devices use an open source protocol.  You know exactly what is begin transmitted and when.  You can even play with the source code to change what is being transmitted and where to receive it!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"7vv43-0-0\"\u003e\u003cspan data-offset-key=\"7vv43-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"36pkl-0-0\"\u003e\u003cspan data-offset-key=\"36pkl-0-0\"\u003eThe Heart of AfterShock \u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"36pkl-0-0\"\u003e\u003cspan data-offset-key=\"36pkl-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"f1btk-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f1btk-0-0\"\u003e\u003cspan data-offset-key=\"f1btk-0-0\"\u003eThe CPU at the heart of these sensors is a 16MHz Arduino Pro Mini Low Power compatible CPU that has all the necessary connectors and hardware to keep the sensors running smoothly.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"ab49i-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"ab49i-0-0\"\u003e\n\u003cspan data-offset-key=\"ab49i-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"3vq18-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/033\/240d3c9fb618270a209f7c5a4a6946e4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469323\u0026amp;frame=1\u0026amp;s=c6f5c54c85923136af5f535bb73ef8ab\" alt=\"SwitchDoc Labs Mini Pro Plus Low Power\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/033\/240d3c9fb618270a209f7c5a4a6946e4_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469323\u0026amp;frame=1\u0026amp;s=c6f5c54c85923136af5f535bb73ef8ab\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eSwitchDoc Labs Mini Pro Plus Low Power\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"cc7b6-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cc7b6-0-0\"\u003e\n\u003cspan data-offset-key=\"cc7b6-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"aoaak-0-0\"\u003e\u003cspan data-offset-key=\"aoaak-0-0\"\u003eThe 3D Prints\u003c\/span\u003e\u003c\/h1\u003e\n\u003cfigure data-offset-key=\"51ba9-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/044\/1d3355a3e2f1f923b01bfd48f46338a8_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469359\u0026amp;frame=1\u0026amp;s=431588ed4bb1526647312026c7476b42\" role=\"presentation\" alt=\"\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/287\/044\/1d3355a3e2f1f923b01bfd48f46338a8_original.jpeg?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619469359\u0026amp;frame=1\u0026amp;s=431588ed4bb1526647312026c7476b42\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"al9jj-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"al9jj-0-0\"\u003e\n\u003cspan data-offset-key=\"al9jj-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"3sglr-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3sglr-0-0\"\u003e\u003cspan data-offset-key=\"3sglr-0-0\"\u003eWe provide STL files (and the 360 Fusion Design Files)  for AfterShock projects. Don't have a 3D Printer?   You can find them here.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"3sglr-0-0\"\u003e\u003cspan data-offset-key=\"3sglr-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"27sur-0-0\"\u003e\u003cspan data-offset-key=\"27sur-0-0\"\u003eWhat is SkyWeather2?\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"27sur-0-0\"\u003e\u003cspan data-offset-key=\"27sur-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"2vggl-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2vggl-0-0\"\u003e\u003cspan data-offset-key=\"2vggl-0-0\"\u003eSkyWeather2 is a full blown DIY weather staiton.  \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eYou can find it here.\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"2vggl-0-0\"\u003e\u003cspan data-offset-key=\"2vggl-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"eamsf-0-0\"\u003e\u003c\/div\u003e\n\u003cdiv data-offset-key=\"6kkh5-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch1 class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003eTechnical Background\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"6kkh5-0-0\"\u003e\u003cspan data-offset-key=\"6kkh5-0-0\"\u003e\"The AfterShock Earthquake detector is one of the most fun projects that we have ever put together.   We got to build on the hardware and technology we developed for the Air Quality and Lightning Detector WeatherSense sensors and develop a board based on the D7S from Omron, a very cool Japanese company.\"\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"c9ghk-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"c9ghk-0-0\"\u003e\u003cspan data-offset-key=\"c9ghk-0-0\"\u003eThe AfterShock Earthquake detector works by using a 3 axis accelerometer to detect an movement in the X, Y and Z axis.  It records any movement in these directions and then puts the resulting signals through a sophisticated algorithm to determine whether this was an earthquake or just noise.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"g1p2-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"g1p2-0-0\"\u003e\n\u003cspan data-offset-key=\"g1p2-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigure data-offset-key=\"d321k-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"\" contenteditable=\"false\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"relative\"\u003e\n\u003cdiv class=\"absolute t2 r2 bg-white px2 shadow-2 radius2px flex items-center\"\u003e\n\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/285\/328\/44d067f1784492c4a67c775aeb76145f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619461395\u0026amp;frame=1\u0026amp;s=b70ff4315d177a53fe47588c86d705b1\" alt=\"An Earthquake in Progress\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/285\/328\/44d067f1784492c4a67c775aeb76145f_original.png?ixlib=rb-4.0.2\u0026amp;auto=compress%2Cformat\u0026amp;q=1\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1619461395\u0026amp;frame=1\u0026amp;s=b70ff4315d177a53fe47588c86d705b1\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cfigcaption class=\"type-12 type-13-md dark-grey-500\"\u003eAn Earthquake in Progress\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cdiv data-offset-key=\"5u75a-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"5u75a-0-0\"\u003e\n\u003cspan data-offset-key=\"5u75a-0-0\"\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"cf542-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"cf542-0-0\"\u003e\u003cspan data-offset-key=\"cf542-0-0\"\u003e As you can see from the below graph, there is a very high correlation between actual ground movements and what AfterShock detects.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-offset-key=\"f1km4-0-0\" data-editor=\"e2tam\" data-block=\"true\" class=\"mb1\"\u003e\n\u003cdiv class=\"public-DraftStyleDefault-block public-DraftStyleDefault-ltr\" data-offset-key=\"f1km4-0-0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"});window.BOLD.common.Shopify.saveVariant(40004619632807, { variant: {"id":40004619632807,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0758-WSAFTERSHOCK-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Solar Wireless AfterShock Earthquake Detector - WeatherSense","public_title":null,"options":["Default Title"],"price":12000,"weight":454,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 6721670348967, product_handle: "solar-wireless-aftershock-earthquake-detector-weathersense", price: 12000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("weatherrack3-sensor-package", 7949562446044, {"id":7949562446044,"title":"WeatherRack3","handle":"weatherrack3-sensor-package","description":"\u003cp\u003e\u003cspan\u003eNew NO MOVING PARTS WeatheRack3. It measures:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e- Air Temperature\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Air Humidity\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Air Pressure\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Rainfall (Optical)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Noise\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Air Quality\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Wind Speed (Ultrasonic)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Wind Direction (Ultrasonic)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2) 433MHz communication fromWeatherRack3 to Raspberry Pi\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3) Compatible with the WeatherSense products (Lightning, Radiation, etc.)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4) Solar Powered (panel included) and enclosure box (Bud Box)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5) Solar controller, Mini Pro Plus included (all that good solar data!)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e6) Populated PC Board with Interfaces and Mini Pro Plus\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eParts List\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e1 Gland Connector\u003c\/p\u003e\n\u003cp\u003e1 MC4 Male and insert\u003c\/p\u003e\n\u003cp\u003e1 MC4 Female and insert\u003c\/p\u003e\n\u003cp\u003e1 Renogy Wanderer\u003c\/p\u003e\n\u003cp\u003e1 30W Solar Panel (only included on US shipments)\u003c\/p\u003e\n\u003cp\u003e1 Populated SwitchDoc Labs Wr3 Utility Board\u003c\/p\u003e\n\u003cp\u003e1 Renogy RJ11 cable\u003c\/p\u003e\n\u003cp\u003e1 WeatherRack3 Sensor\u003c\/p\u003e\n\u003cp\u003e1 USB Type A to Type Micro cable\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNO 12V Battery included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuy on Amazon:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e12V 7ah Battery - \u003ca href=\"https:\/\/amzn.to\/3Dcsb8u%20\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/3Dcsb8u \u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e12V 10ah Battery -\u003ca href=\"https:\/\/amzn.to\/3D96kPh\"\u003e https:\/\/amzn.to\/3D96kPh\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eAssembly and Data Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2023\/01\/weatherrack3-building\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHow to Build a WeatherRack3\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2022\/12\/weatherrack3-data-formats\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack3 Data Formats\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWiring Diagram supplied.  No Step-by-step manual included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2023\/01\/WeatherRack3SystemWiring012823.pdf\" target=\"_blank\"\u003e\u003cspan\u003eWiring Diagrams and Documentatio\u003c\/span\u003e\u003c\/a\u003en\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWeatherSense\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs rtl_433\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/rtl_433\"\u003ehttps:\/\/github.com\/switchdoclabs\/rtl_433\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoftware for the Mini Grove Plus\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseWR3\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseWR3\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-01-01T09:49:47-08:00","created_at":"2023-01-01T09:49:46-08:00","vendor":"SwitchDoc Labs","type":"Grove,Cables,Raspberry Pi,Arduino,ESP32,I2C","tags":[],"price":80000,"price_min":80000,"price_max":80000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43703590224092,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKU-010123UOI","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"WeatherRack3","public_title":null,"options":["Default Title"],"price":80000,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0684.jpg?v=1674529046","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51fusenDwLL._AC_SL1000.jpg?v=1674529046","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_08312.jpg?v=1674529046","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/63AAD81A-1F8A-48C0-96D9-CD81D0E6D663.jpg?v=1674529046","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0830.jpg?v=1674529046","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0627.jpg?v=1674529046"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0684.jpg?v=1674529046","options":["Title"],"media":[{"alt":null,"id":31172996759772,"position":1,"preview_image":{"aspect_ratio":0.75,"height":2400,"width":1800,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0684.jpg?v=1674529046"},"aspect_ratio":0.75,"height":2400,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0684.jpg?v=1674529046","width":1800},{"alt":null,"id":31172987748572,"position":2,"preview_image":{"aspect_ratio":1.422,"height":703,"width":1000,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51fusenDwLL._AC_SL1000.jpg?v=1674529046"},"aspect_ratio":1.422,"height":703,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/51fusenDwLL._AC_SL1000.jpg?v=1674529046","width":1000},{"alt":null,"id":31172995645660,"position":3,"preview_image":{"aspect_ratio":0.75,"height":2731,"width":2048,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_08312.jpg?v=1674529046"},"aspect_ratio":0.75,"height":2731,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_08312.jpg?v=1674529046","width":2048},{"alt":null,"id":31172995809500,"position":4,"preview_image":{"aspect_ratio":0.8,"height":2560,"width":2048,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/63AAD81A-1F8A-48C0-96D9-CD81D0E6D663.jpg?v=1674529046"},"aspect_ratio":0.8,"height":2560,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/63AAD81A-1F8A-48C0-96D9-CD81D0E6D663.jpg?v=1674529046","width":2048},{"alt":null,"id":31172996137180,"position":5,"preview_image":{"aspect_ratio":0.75,"height":2731,"width":2048,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0830.jpg?v=1674529046"},"aspect_ratio":0.75,"height":2731,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0830.jpg?v=1674529046","width":2048},{"alt":null,"id":31172996661468,"position":6,"preview_image":{"aspect_ratio":0.75,"height":2400,"width":1800,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0627.jpg?v=1674529046"},"aspect_ratio":0.75,"height":2400,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_0627.jpg?v=1674529046","width":1800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eNew NO MOVING PARTS WeatheRack3. It measures:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e- Air Temperature\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Air Humidity\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Air Pressure\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Rainfall (Optical)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Noise\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Air Quality\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Wind Speed (Ultrasonic)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Wind Direction (Ultrasonic)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2) 433MHz communication fromWeatherRack3 to Raspberry Pi\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3) Compatible with the WeatherSense products (Lightning, Radiation, etc.)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4) Solar Powered (panel included) and enclosure box (Bud Box)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5) Solar controller, Mini Pro Plus included (all that good solar data!)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e6) Populated PC Board with Interfaces and Mini Pro Plus\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eParts List\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e1 Gland Connector\u003c\/p\u003e\n\u003cp\u003e1 MC4 Male and insert\u003c\/p\u003e\n\u003cp\u003e1 MC4 Female and insert\u003c\/p\u003e\n\u003cp\u003e1 Renogy Wanderer\u003c\/p\u003e\n\u003cp\u003e1 30W Solar Panel (only included on US shipments)\u003c\/p\u003e\n\u003cp\u003e1 Populated SwitchDoc Labs Wr3 Utility Board\u003c\/p\u003e\n\u003cp\u003e1 Renogy RJ11 cable\u003c\/p\u003e\n\u003cp\u003e1 WeatherRack3 Sensor\u003c\/p\u003e\n\u003cp\u003e1 USB Type A to Type Micro cable\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNO 12V Battery included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuy on Amazon:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e12V 7ah Battery - \u003ca href=\"https:\/\/amzn.to\/3Dcsb8u%20\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/3Dcsb8u \u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e12V 10ah Battery -\u003ca href=\"https:\/\/amzn.to\/3D96kPh\"\u003e https:\/\/amzn.to\/3D96kPh\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eAssembly and Data Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2023\/01\/weatherrack3-building\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHow to Build a WeatherRack3\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/2022\/12\/weatherrack3-data-formats\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWeatherRack3 Data Formats\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWiring Diagram supplied.  No Step-by-step manual included.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.switchdoc.com\/wp-content\/uploads\/2023\/01\/WeatherRack3SystemWiring012823.pdf\" target=\"_blank\"\u003e\u003cspan\u003eWiring Diagrams and Documentatio\u003c\/span\u003e\u003c\/a\u003en\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWeatherSense\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Pi_WeatherSense\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSwitchDoc Labs rtl_433\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/rtl_433\"\u003ehttps:\/\/github.com\/switchdoclabs\/rtl_433\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoftware for the Mini Grove Plus\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseWR3\"\u003ehttps:\/\/github.com\/switchdoclabs\/SDL_Arduino_WeatherSenseWR3\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(43703590224092, { variant: {"id":43703590224092,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SKU-010123UOI","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"WeatherRack3","public_title":null,"options":["Default Title"],"price":80000,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 7949562446044, product_handle: "weatherrack3-sensor-package", price: 80000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("copy-of-3d-print-for-raspberry-pi-iot-lightning-detector-kit", 1086207590444, {"id":1086207590444,"title":"3D Print for Arduino IOT Lightning Detector Kit","handle":"copy-of-3d-print-for-raspberry-pi-iot-lightning-detector-kit","description":"\u003ch1\u003e3D Print for Arduino IOT Lightning Detector Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/ThunderboardIOT_large.png?v=1531927648\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full 3D print of the Arduino IOT Lightning Detector Box.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWant to print your own?\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-12-10T14:37:28-08:00","created_at":"2018-07-18T07:40:51-07:00","vendor":"SwitchDoc Labs","type":"Shop All,3D Printed Products","tags":["3D Printer","arduino","IOT","raspberry pi"],"price":8000,"price_min":8000,"price_max":8000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10521768591404,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0315-ARD3DIOT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for Arduino IOT Lightning Detector Kit","public_title":null,"options":["Default Title"],"price":8000,"weight":227,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728686","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ThunderboardIOT_35de76be-695c-4556-9dba-c7c6a2454d14.png?v=1531927679"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ThunderboardIOT_35de76be-695c-4556-9dba-c7c6a2454d14.png?v=1531927679","options":["Title"],"media":[{"alt":null,"id":1683742392364,"position":1,"preview_image":{"aspect_ratio":1.28,"height":2026,"width":2594,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ThunderboardIOT_35de76be-695c-4556-9dba-c7c6a2454d14.png?v=1531927679"},"aspect_ratio":1.28,"height":2026,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/ThunderboardIOT_35de76be-695c-4556-9dba-c7c6a2454d14.png?v=1531927679","width":2594}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e3D Print for Arduino IOT Lightning Detector Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2455\/2113\/files\/ThunderboardIOT_large.png?v=1531927648\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eFor those that do not have at 3D printer, we offer a full 3D print of the Arduino IOT Lightning Detector Box.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWant to print your own?\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/switchdoclabs\/SDL_STL_RaspberryPi_ThunderBoard_IOT\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eYou can get the 3D Printing Files here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(10521768591404, { variant: {"id":10521768591404,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0315-ARD3DIOT-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D Print for Arduino IOT Lightning Detector Kit","public_title":null,"options":["Default Title"],"price":8000,"weight":227,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"088234728686","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 1086207590444, product_handle: "copy-of-3d-print-for-raspberry-pi-iot-lightning-detector-kit", price: 8000, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.saveProduct("skyweather2-ultimate", 7050566795431, {"id":7050566795431,"title":"SkyWeather2 Ultimate Bundle","handle":"skyweather2-ultimate","description":"\u003ch1\u003eSkyWeather2 Ultimate Bundle\u003c\/h1\u003e\n\u003cp\u003eDo you want to know your local weather environment in detail?   And learn about the Raspberry Pi, ESP32 and wireless transmission of data?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThen the SkyWeather2 Ultimate Bundle is for you.  No SOLDERING REQUIRED IN ANY OF THE KITS!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSkyWeather2 Ultimate contains the base \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eSkyWeather2 Kit\u003c\/a\u003e and all of the following WeatherSense sensors:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/lightning-detector-solar-powered-433mhz-wireless-sensor-weathersense\"\u003eWeatherSense Solar Lightning \u003c\/a\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/lightning-detector-solar-powered-433mhz-wireless-sensor-weathersense\" target=\"_blank\"\u003eDetector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-wireless-aftershock-earthquake-detector-weathersense\" target=\"_blank\"\u003eWeatherSense Solar AfterShock Earthquake Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-powered-433mhz-wireless-air-quality-sensor-weathersense\" target=\"_blank\"\u003eWeatherSense Solar Air Quality Index Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-skycam-weathersense\" target=\"_blank\"\u003eWeatherSense Solar SkyCam Remote Camera\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt also includes the \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/32gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\" target=\"_blank\"\u003epre-formatted SDCard\u003c\/a\u003e with all the latest software already installed.\u003c\/p\u003e\n\u003cp\u003eIn each of the individual product pages you will find full assembly and test manuals as well as links to all of the 3D Print STL Files for your printer.\u003c\/p\u003e\n\u003cp\u003eThis bundle does not include the Raspberry Pi, or the 3D Printed Boxes.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-09-19T15:42:13-07:00","created_at":"2021-09-19T13:45:10-07:00","vendor":"SwitchDoc Labs","type":"Shop All,Grove,Raspberry Pi,Arduino,ESP8266,I2C","tags":[],"price":54900,"price_min":54900,"price_max":54900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41347679060135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0856-SKYW2ULTIMATE-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"SkyWeather2 Ultimate Bundle","public_title":null,"options":["Default Title"],"price":54900,"weight":2268,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/GroupAnno.jpg?v=1632088567","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SW2-shot-lens-flare_e7d7191a-fe2c-4761-bad4-03cabd3b71e5.gif?v=1632088567","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8f9bcb2fb5f8b42cba9ca8b4d5fdbac9_original_11af8af6-b8ff-46bd-b62c-8b4d9991a2aa.jpg?v=1632088567","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2135_61f5f7b1-bcdb-4512-bab5-d88e027b49f7.jpg?v=1632088567","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png_966f5e8c-28c3-41a7-b3f5-6d0cfd4ca3e7.jpg?v=1632088567","#\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/61wtfkbzUIL._AC_SL1093_1.jpg?v=1632088567","\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_78592.jpg?v=1632088567"],"featured_image":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/GroupAnno.jpg?v=1632088567","options":["Title"],"media":[{"alt":null,"id":23557189927079,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/GroupAnno.jpg?v=1632088567"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/GroupAnno.jpg?v=1632088567","width":4032},{"alt":null,"id":23557190025383,"position":2,"preview_image":{"aspect_ratio":1.09,"height":1464,"width":1596,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SW2-shot-lens-flare_e7d7191a-fe2c-4761-bad4-03cabd3b71e5.gif?v=1632088567"},"aspect_ratio":1.09,"height":1464,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/SW2-shot-lens-flare_e7d7191a-fe2c-4761-bad4-03cabd3b71e5.gif?v=1632088567","width":1596},{"alt":null,"id":23557189894311,"position":3,"preview_image":{"aspect_ratio":1.281,"height":531,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8f9bcb2fb5f8b42cba9ca8b4d5fdbac9_original_11af8af6-b8ff-46bd-b62c-8b4d9991a2aa.jpg?v=1632088567"},"aspect_ratio":1.281,"height":531,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/8f9bcb2fb5f8b42cba9ca8b4d5fdbac9_original_11af8af6-b8ff-46bd-b62c-8b4d9991a2aa.jpg?v=1632088567","width":680},{"alt":null,"id":23557189959847,"position":4,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2135_61f5f7b1-bcdb-4512-bab5-d88e027b49f7.jpg?v=1632088567"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_2135_61f5f7b1-bcdb-4512-bab5-d88e027b49f7.jpg?v=1632088567","width":3024},{"alt":null,"id":23557322277031,"position":5,"preview_image":{"aspect_ratio":0.86,"height":791,"width":680,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png_966f5e8c-28c3-41a7-b3f5-6d0cfd4ca3e7.jpg?v=1632088567"},"aspect_ratio":0.86,"height":791,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/17e77f4a496d285ae0cccea8fce137b1_original_png_966f5e8c-28c3-41a7-b3f5-6d0cfd4ca3e7.jpg?v=1632088567","width":680},{"alt":null,"id":23557207687335,"position":6,"preview_image":{"aspect_ratio":1.359,"height":802,"width":1090,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/61wtfkbzUIL._AC_SL1093_1.jpg?v=1632088567"},"aspect_ratio":1.359,"height":802,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/61wtfkbzUIL._AC_SL1093_1.jpg?v=1632088567","width":1090},{"alt":null,"id":23557189992615,"position":7,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_78592.jpg?v=1632088567"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"\/\/switchdoc.ricehawk.site\/cdn\/shop\/products\/IMG_78592.jpg?v=1632088567","width":4032}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eSkyWeather2 Ultimate Bundle\u003c\/h1\u003e\n\u003cp\u003eDo you want to know your local weather environment in detail?   And learn about the Raspberry Pi, ESP32 and wireless transmission of data?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThen the SkyWeather2 Ultimate Bundle is for you.  No SOLDERING REQUIRED IN ANY OF THE KITS!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSkyWeather2 Ultimate contains the base \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/skyweather2-raspberry-pi-based-weather-station-kit-for-the-cloud\" target=\"_blank\"\u003eSkyWeather2 Kit\u003c\/a\u003e and all of the following WeatherSense sensors:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/lightning-detector-solar-powered-433mhz-wireless-sensor-weathersense\"\u003eWeatherSense Solar Lightning \u003c\/a\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/lightning-detector-solar-powered-433mhz-wireless-sensor-weathersense\" target=\"_blank\"\u003eDetector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-wireless-aftershock-earthquake-detector-weathersense\" target=\"_blank\"\u003eWeatherSense Solar AfterShock Earthquake Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-powered-433mhz-wireless-air-quality-sensor-weathersense\" target=\"_blank\"\u003eWeatherSense Solar Air Quality Index Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.switchdoc.com\/products\/solar-skycam-weathersense\" target=\"_blank\"\u003eWeatherSense Solar SkyCam Remote Camera\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt also includes the \u003ca href=\"https:\/\/shop.switchdoc.com\/products\/32gb-sd-card-with-stretch-smart-garden-system-groveweatherpi\" target=\"_blank\"\u003epre-formatted SDCard\u003c\/a\u003e with all the latest software already installed.\u003c\/p\u003e\n\u003cp\u003eIn each of the individual product pages you will find full assembly and test manuals as well as links to all of the 3D Print STL Files for your printer.\u003c\/p\u003e\n\u003cp\u003eThis bundle does not include the Raspberry Pi, or the 3D Printed Boxes.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"});window.BOLD.common.Shopify.saveVariant(41347679060135, { variant: {"id":41347679060135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0856-SKYW2ULTIMATE-DSBT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"SkyWeather2 Ultimate Bundle","public_title":null,"options":["Default Title"],"price":54900,"weight":2268,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}, inventory_quantity: 0, product_id: 7050566795431, product_handle: "skyweather2-ultimate", price: 54900, variant_title: "Default Title", group_id: '', csp_metafield: {}});window.BOLD.common.Shopify.metafields = window.BOLD.common.Shopify.metafields || {};window.BOLD.common.Shopify.metafields["bold_rp"] = {};window.BOLD.common.Shopify.metafields["bold_csp_defaults"] = {};

Thunder Board Lightning Simulator
Thunder Board Lightning Simulator
Thunder Board Lightning Simulator
Thunder Board Lightning Simulator
Thunder Board Lightning Simulator
I2C Lightning Detector - Grove Connectors - MOD-1016G
I2C Lightning Detector - Grove Connectors - MOD-1016G

Thunder Board Lightning Simulator

$74.95
$74.95

Thunder Board Lightning Simulator

Debugging Lightning Detectors has always been a problem.  You have to wait for a lightning storm.   To fix this problem, we have now developed a Lighting Simulator product.  

This board is a companion to the SwitchDoc Labs Thunder Board Lighting Detector.   This fully assembled and programmed product will generate simulated lighting on cue to test your lightning detection setup.

We use it regularly in house and are pleased to release this as a product.

We have just posted the software for the Thunder Board Lightning Simulator.

https://github.com/switchdoclabs/SDL_Arduino_ThunderBoardSimulator

It comes with a fully assembled and programmed shield plugged into an Arduino Uno R3. Works out of the box.  USB to USB - Type A Cable for programming and power.

Here is what it does:

  • Far Lightning Strike (push Far Stk Button)
  • Mid-range Lightning Strike (push Mid Stk Button)
  • Close Lightning Strike (push Close Stk Button)

and three other lightning test modes:

  • Slow Timed Lightning Strike Mode - Every 5 minutes (push Far Stk and Mid Stk buttons together)
  • Fast Timed Lightning Strike Mode - Every 15 seconds (push Mid Stk and Close Stk buttons together)
  • Random Timed Lightning Strike Mode - From 30 seconds to 30 minutes (push all three buttons together)

You terminate the Time Strike modes by pushing any single button or by performing a power off or reset.

 

Note:   This lighting simulator is not very strong and might have to be held close to the Thunder Board Lightning Detector especially in the presence of cell phones, computers and monitors.   If you look at the Thunder Board Lightning Detector, you can see when the Lightning board picks up lightning when the Interrupt White LED blinks or lights up.

If you are having detection problems, move your whole test setup away from RFI (Radio Frequency Interference) sources.

 

New Tutorial on Thunder Board

Here is a new video tutorial for Tuning the ThunderBoard by Dr. Shovic

 

Back to Weather