Grove 6 – Axis Accelerometer & Compass v2.0
The Grove 6 – Axis Accelerometer & Compass v2 has 3 magnetic field channels and 3 acceleration channels, and 16-bit data output. It can be used easy with micro controller via I2C or SPI port.
We have built a demo project for this board on our BC24 board.
This sensor can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection.
Features:
-
SPI / I2C interfaces
-
Programmable interrupt
-
Wide Full Scale Range±2/±4/±8/±12 gauss magnetic full scale±2/±4/±6/±8/±16g acceleration full scale
-
Power-down mode / low-power mode
Downloads
- LSM303 Specification
- BC24 and Grove 6 Axis board Software
- Arduino Drivers
- ESP32 Drivers
- ESP8266 Drivers
- Raspberry Pi Drivers (Under Development)
Technical Details
| Dimensions | 100mm x 80mm x 11mm |
| Weight | G.W 7g |
| Battery | Exclude |
| Working Voltage | 3.3V - 5V |
| Control Mode | I2C / SPI |
| Operating Temperature | -40 ~ +85°C |
Part List
| Grove - 6-Axis Accelerometer&Compass v2.0 | 1 |
| Grove Cable | 1 |